☆Surface Treatment: Sand Blasted
☆Tip: YG8 Carbide Tip
☆Set Listing: 13* Hammer Drill Bits, 1*Point Chisel, 2* Flat Chisel, 1* U-shaped
Chisel
☆Size Included:
SDS Plus Hammer Drill Bit: 5.5 x 110mm, 6 x 110mm, 5.5 x 160mm, 6 x 160mm,
6.5 x 160mm, 7 x 160mm, 8 x 160mm, 2* 10 x 160mm, 14 x 210mm, 10 x 260mm,
12 x 260mm, 16 x 260mm
Flat Chisel: 14 x 250 x 20mm, 14 x 250 x 40mm
Point Chisel: 14 x 250mm
U-shaped Chisel: 14 x 250mm
☆Advantage:
The SDS - PLUS shank is suitable for most rotary hammer drills on the market
and meets most of your needs. SDS chisel matches the electric hammer drill to punch
hole for concrete, brick and wall, cut and chisel groove.
☆Product Detail: