DOC-BOX 10102 Installation guide

Type
Installation guide
The Doc-Box® Mounting Instructions
MOUNTING INSTRUCTIONS
It is recommended that the Doc-Box® be mounted level and perpendicular to the ground on a
sturdy 4” x 4” post employing the included hardware and mounting holes, with suggested above
ground height of 5’-9”, In order for the lid to open correctly, the top of the mounting post should
fit under the “post stop guide” on the back of the Doc-Box® so that the post doesn’t interfere
with the back of the lid when opened. The Doc-Box® will protect its contents from all weather
when kept closed and posted correctly, incorrect posting near sprinklers, units mounted on
leaning posts, or units left lying on the ground may comprise contents.
HOW TO CLOSE THE DOC-BOX® LID
Close the lid down, apply pressure to the two formed ridges at the bottom of the box then apply
pressure until it snaps shut. You will hear it snap shut! This guarantees the protection of your
documents
CLEANING AND CARE
The Doc-Box® is made of a rugged material called (HDPE), and will withstand most abuse. The
Doc-Box® should only be written on with a grease pencil (also called a china marker) and can
be cleaned with light oil solvent (such as WD-40®) for next use or periodically cleaned with any
household spray cleaner.
DAMAGE
IMPORTANT!!! Upon receiving The Doc-Box® order, remove the unit(s) from its carton(s) and
inspect for damage which may have occurred during shipment. If damage is found, immediate-
ly notify the shipping company, within three business days.
www.docbox.com
  • Page 1 1

DOC-BOX 10102 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI