Hoshizaki HS-5249 User manual

1A4631‐010



InstallationInstructionsforCPTModels:

1. Remove2lowerscrewsfromfrontpanelandpullpanelfrommountingclipsandsetaside,takecarenottopull

wireharnessorthermistorsfromcontroller.SeeFig.1

2. Removeupperfrontscrewand2rearscrewsfromtherearULpanel.SeeFig. 2

3. Slideside

panelforwardanddowntoremovefrommountingscrews,setsidepanelaside.

4. Removedrainhosefromdrainpan,takethistimetocheckconditionofdrainhoseandremoveanydebrisor

clogindraintube.SeeFig.3

5. Liftplasticdrainpanfromsupportbrackets,removal 

ofrearULcovermaybeneedtogainbetteraccess.

6. Locatemainpowersupplycord,removecabletiestogainaccesstotheblackpowerwire,WhiteNeutraland

GreenGroundwire.

7. RemoveBellconnectorsandattachsupplywiresfromPlugHarness,usesuppliedBellConnectorstoreattach



wires.

8. Usesuppliedcabletiestobundlewiresbacktooriginallocation.

9. Removeoriginalpanbracketsanddiscard,installnewsuppliedbracketsfromKit.Placeheatedcondensatepan

intopanbrackets,routeheatedpanpowerwiretothebacksideofpanandco nnectpanplugtoplug

harness.

Secureplugconnectionwithsuppliedcableties.SeeFig4‐5

10. Insertdrainpipeintopan,makesuredrainpipedoes notmakecontactwithheatingelement.

11. Performsafetycheckofallwiresandconnections.

12. Installallpanelsinreverseorder.

13. Placewireharnesslabelnext

tooriginallabellocation.



Check to ensure that all parts are included:

Index

No.

Qty

61CondesatePanBr ac ket 2 A8491‐01

Hoshizaki Heated Condensate Pan Kit

HS-5249

For use with Hoshizaki Commercial Pizza Prep and Open Top Models

BellConnector

WireLabel

8101‐12CE

3A9368‐01

Description Part Number

4A6043-01

4A6049-01

8911-0200

Heated Condensate Pan

Harness - Plug

Cable Tie

1A4631‐010

 



Fig.1

Fig.2

Fig.3

.4

1A4631‐010



InstallationInstructionsforOpenTopModels:

1. RemoveRearULcoverfromunit.

2. Removedrainhosefromdrainpan,takethistimetocheckconditionofdrainhoseandremoveanydebrisor

clogindraintube.

3. Removeplasticdrainpanandbothleftandrightmountingbrackets.

4. Locatemainpowersupplycord,remove

cabletiestogainaccesstotheblackpowerwire,WhiteNeutraland

GreenGroundwire.

5. RemoveBellconnectorsandattachsupplywiresfromPlugHarness,usesuppliedBellConnectorstoreattach

wires.

6. Usesuppliedcabletiestobundlewiresbacktooriginallocation.

7. Installnewsupplied

bracketsfromKit.Placeheatedcondensatepanintopanbrackets,routeheatedpan

powerwiretothebacksideofpanandconnectpanplugtoplugharness.Secureplugconnectionwith

suppliedcableties.SeeFig6‐7 

8. Insertdrainpipeintopan,makesuredrainpipedoes not

makecontactwithheatingelement.

9. Performsafetycheckofallwiresandconnections.

10. Installallpanelsinreverseorder.

11. Placewireharnesslabelnexttooriginallabellocation.



.5

1A4631‐010



Fig.6

Fig.7

Hoshizaki HS-5249 User manual

Related papers

Other documents