2. Digimerge
  3. ACCUTC1

Digimerge ACCUTC1 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Digimerge ACCUTC1 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
UTC Controller
ACCUTC1
Quick Start Guide
1. Connect the camera’s video output to the
controller.
2. Connect the other end of the controller to the
DVR.
NOTE: Any configuration of extension cables can
be used, as long as they connect the camera to
the DVR through controller’s BNC connector. The
DVR and camera do not need to be connected to
a specific side of the connector.
3. Press and hold the button to open the
camera menu*. Use the controller to send
commands to the camera:
• Enter button
• Up
• Left
• Right
• Down
*See the instruction manual for your camera for
details on specific button/menu functions.
1
2
3
This UTC Controller allows you to control the OSD (on-screen display) menu over the video cable on cameras that support
UTC (Pelco-C Protocol).
To control the camera OSD menu:
UTC controller is not intended for outdoor use.
© 2013 FLIR Systems, Inc. All rights reserved.
www.flirsecurity.com/pro
ACCUTC1_QSG_EN_R1
NOTE: If the UTC controller stops working, replace the battery with a fresh CR2025 battery with the positive side facing
away from the buttons.
/