2. Toro
  3. Stake Down Guards, 4045 Directional Drill

Toro Stake Down Guards, 4045 Directional Drill Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Stake Down Guards, 4045 Directional Drill Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3396-148RevB
StakeDownGuards
4045DirectionalDrill
ModelNo.23807
ModelNo.23807E
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Safety
SafetyandInstructionalDecals
125-6179
1.Warning—hazardarea;keepatleast3meters(10feet)
awayfromthemachinewhileinoperation.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3396-148*B
1
PreparingtheMachineand
InstallingtheLeftGuard
Partsneededforthisprocedure:
1Proximity-sensorcap
1
Guardcover
1
Guard-supportbracket
6U-nut
6
Bolt(M8-11/4x35mm)
1
Leftguard
1
Bolt(M12-13/4x120mm)
1
Locknut(M12)
1
Bolt(M8-11/4x30mm)
1
Locknut(M8)
Procedure
1.Disconnecttheproximitysensorthatisconnectedto
thedooronthecage.
2.Gatherupthewiringharnesswiththesensorandusea
cabletietosecuretheharnesstothemachine.
3.Connecttheproximitysensorcaptotheendofthe
wiringharnessconnection.
4.Removethedoor,cageassembly,andleftguard(Figure
1).
Figure1
5.Place3U-nutsontheguard-supportbracket(Figure3).
6.Installtheguard-supportbracketontotheguardcover
(Figure2).
7.Place3U-nutsontheguardcover.
8.Looselyinstalltheassemblytotheframeusing5bolts
(M8-11/4x35mm)asshowninFigure2.
Figure2
1.Bolts(M8-11/4x35mm)
9.Usingtheguard-supportbracketasaguide,markthe
locationofwheretodrillaholeintotheframe(Figure
2).
Figure3
Guard-supportbracketshownwithoutguardcoverfor
illustrativepurposesonly
1.Drillholehere
3.Guard-supportbracket
2.U-nut
10.Removetheguardassemblyanddrilltheholeintothe
frame.
2
11.Installtheguardassemblyontotheframe(Figure2)
using6bolts(M8-11/4x35mm).
12.Torquetheboltsto23to29N-m(17to21ft-lb).
13.Installtheleftguardassemblyusing1bolt(M8-11/4x
30mm),1locknut(M8),1Bolt(M12-13/4x120mm),
and1locknut(M12)asshowninFigure4.
Figure4
1.Bolt(M12-13/4x120mm)4.Bolt(M8-11/4x30mm)
2.Locknut(M8)5.Locknut(M12)
3.Leftguardassembly
14.TorquetheM8boltsto23to29N-m(17to21ft-lb).
15.TorquetheM12boltsto80to100N-m(59to73ft-lb).
2
InstallingtheRightGuard
Brackets
Partsneededforthisprocedure:
1Upperbracket,large
2
Bolt(M12-13/4x120mm)
2
Locknut(M12)
1Upperbracket,small
1Lowerbracket
4
Bolt(M8-11/4x30mm)
4
Locknut(M8)
Procedure
1.Rotatethehydrauliclinesasneededtoensurethatthey
donotrubonthestakedownguardassemblies(Figure
5).
1
g0304 32
Figure5
1.Hydraulicttings/lines
2.InstalltheuppersupportbracketsasshowninFigure6.
3
Figure6
1.Bolt(M12-13/4x120mm)
4.Upperbracket,large
2.Bolt(M8-11/4x30mm)5.Locknut(M8)
3.Upperbracket,small
6.Locknut(M12)
3.TorquetheM8boltsto23to29N-m(17to21ft-lb).
4.TorquetheM12boltsto80to100N-m(59to73ft-lb).
5.Installthelowerbracketusing2bolts(M8-11/4x30
mm)and2locknuts(M8)asshowninFigure7.
Figure7
1.Lowerbracket
3.Bolts(M8-11/4x30mm)
2.Locknuts(M8)
6.TorquetheM8boltsto23to29N-m(17to21ft-lb).
3
InstallingtheStakedown
Guard
Partsneededforthisprocedure:
1
Stakedownguard
8
Bolt(M8-11/4x30mm)
8
Locknut(M8)
Procedure
Rotatethehydrauliclinesasneededtoensurethatthey
donotrubonthestakedownguardassemblies.
Installthestakedownguardusing8bolts(M8-11/4x25mm)
and8locknuts(M8)asshowninFigure8.
Figure8
Torquetheboltsto23to29N-m(17to21ft-lb).
4
/