AmazonBasics GF-80293H User manual

Brand: AmazonBasics

Model: GF-80293H

Type: User manual

AmazonBasics GF-80293H is a high-back executive chair designed to provide comfort and support during extended periods of use. It features a sturdy construction with a breathable mesh back and a padded seat for optimal comfort. The chair is also adjustable, allowing you to customize the seat height, tilt tension, and armrest position to your liking. With its ergonomic design and durable materials, the AmazonBasics GF-80293H is a great choice for anyone who spends long hours at a desk. Here are some of the key features and possible use cases for the AmazonBasics GF-80293H:

Adjustable seat height: The chair's seat can be raised or lowered to accommodate users of different heights. This ensures that your feet are flat on the floor and your legs are at a comfortable angle, reducing strain on your back and legs.

Adjustable seat height: The chair's seat can be raised or lowered to accommodate users of different heights. This ensures that your feet are flat on the floor and your legs are at a comfortable angle, reducing strain on your back and legs.

B00XBC3BF0

B01D7PG5EO

B07GPSQKV9

AmazonBasics High-Back Executive Chair

AmazonBasics Fauteuil de bureau à dossier haut

AmazonBasics Silla ejecutiva con respaldo alto

Amazon

ハイバックエグゼクティブチェア

English. . . . . . . . . . . . . . . . . . . . . . 3

Français. . . . . . . . . . . . . . . . . . . . 14

Español . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . .

http://www.amazon.com/dp/B01D7PG5EO

http://www.amazon.com/dp/B00XBC3BF0

English

Instruction Manual · English

English

Contents

Make sure that the package contains the following parts:

A (3/4” bolts) (12)

C (Wrench) (1)

Back cushion (1)

Seat cushion (1)

Arms (2)

Seat plate (1)

Lift (1)

Star base (1)

Casters (5)

B (Plastic caps) (8)

AmazonBasics High-Back Executive Chair

Assembly Instructions

Step 1: Turn the star base upside down, then press the casters into the holes at the end of each

base leg.

Step 2: Turn the star base upright and insert the lift into the center hole of the star base. The lift

cover should be placed over the lift.

Step 3: Align the seat plate over the pre-drilled holes underneath the seat cushion. Make sure

that the front of the seat plate is facing the front of the seat cushion.

Attach the seat plate to the seat cushion using four(A) bolts. Tighten all the bolts with the

wrench , being careful not to miss-thread the bolts or damage the seat.

FRONT

(C)

Step 4: Turn the seat cushion upright and align the center hole of the seat plate over the lift,

then push the seat cushion down onto the lift firmly until the connection is secure.

Step 5: Attach the arms to the seat cushion with four (A) bolts, using the wrench .

Note: Arm rests are labeled with an "L"

(left) or "R" (right) to show which sides

they should be placed on.

(C)

Step 6: Lay the back cushion on the seat of the chair with the top of the cushion toward the

front.

Attach the back cushion to the arms by inserting two (A) bolts in the lower holes with the

wrench (C). Do not tighten the bolts fully.

Step 7: Rotate the back of the chair up, then secure it with the top two (A) bolts. Fully

tighten all the bolts.

Step 8: Press the plastic caps (B) into the arm holes to cover the bolts.

Caution:

For your safety, before using your chair, make sure that all of the bolts are fully tightened.

Keep the enclosed wrench and check the bolts periodically to make sure they remain securely

tightened.

Adjustments

Adjusting the seat height

To raise your seat, lean forward to lift your body weight from the seat, then pull up the control

handle.

To lower the seat, pull up the control handle while you're seated.

Control

handle

Adjusting the tilt tension

Turn the tilt knob clockwise to make it easier to rock your chair backwards.

Turn the tilt knob counter-clockwise to make it harder to rock your chair backwards.

Note: If your chair won't tilt back, pull out the control handle.

Tilt knob

Operating the tilt lockout

To let your chair tilt back, pull the control handle out.

To stop your chair from tilting, sit forward, then push the control handle in.

Safety and Compliance

• Use care when handling.

• Please read the instructions completely before assembly.

• Remove all parts from the carton and ensure all parts are included prior to assembly.

• Assemble the chair on the carton or carpet to prevent scratching the chair.

• Be careful not to cross-thread bolts.

• Do not use power tools.

Speciﬁcations

Dimensions (H x D x W) 41.73-45.47 x 29.13 x 26.18 inches

(106 - 115.5 x 74 x 66.5cm)

Maximum load weight 275 lbs. (124.7 kg)

Control

handle

ATTENTION: ALL REPAIR WORK OR EXCHANGE FOR THE HEIGHT ADJUSTABLE GAS LIFT MUST BE

DONE BY SPECIALISTS.

Page is loading ...

AmazonBasics GF-80293H User manual

Brand: AmazonBasics

Model: GF-80293H

Type: User manual

Adjustable seat height: The chair's seat can be raised or lowered to accommodate users of different heights. This ensures that your feet are flat on the floor and your legs are at a comfortable angle, reducing strain on your back and legs.

Download PDF

report