Indoor Wifi Camera

Quick Installation Guide

Product Features

Microphone

Camera Lens

Status LED

Device x 1

User Guide x 1

Power Charger x 1

Reset/WPS Button

Status LED Device Status

Green light and slow ash

Green light and quick ash

Solid green light

Green and red ashing light

Red light and slow ash

Red light and quick ash

Booting complete, entering cong status

Wi Pairing in progress

Wi connected

Device Upgrade

Wi disconnected

Device fail to boot up; SD card not working

Note: To reset, long press for 10 seconds till the light is off. To enable WPS,

just press the button.

Start Yale View App and register an account

Step 4

Follow the steps below to connect your camera

Note:

If you want to add more than one camera, please repeat step 4 for each camera. If you want to change wi settings, please reset the camera to factory setting and repeat step 4.

Wall Mount Installation

Step 1 Drill holes on the proper mounting surface according to the hole

sites of installation position map.

Step 2 Knock the expansion bolts into the holes

Step 3 Use self tapping screws to install the quick installation board

Hereby, ASSA ABLOY Ltd., School Street, Willenhall, West Midlands, England WV13

3PW declares that the radio equipment type SV-DFFI-W / SV-DF7I-W is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

www.yalelock.com/smart-living/doc.

THE YALE BRAND, with its unparalleled global reach and

range of products, reassures more people in more countries

than any other consumer locking solution.

THE ASSA ABLOY GROUP is the world’s leading

manufacturer and supplier of locking solutions, dedicated to

VIEW