Hilti 431364 User guide

Hilti
Brand
Hilti
Model
431364
Type
User guide

Hilti 431364

The Hilti SID 1-A12 cordless screwdriver is a powerful and versatile tool that is suitable for a wide variety of screwdriving applications. It is ideal for use in tight spaces or on overhead work, and its compact design makes it easy to maneuver. The SID 1-A12 is also equipped with a number of features that make it a great choice for professional users, including:

  • A brushless motor that provides more power and longer runtime than brushed motors
  • A metal gearbox that is durable and long-lasting
  • A variable speed trigger that allows you to control the speed of the screwdriver

Hilti 431364

The Hilti SID 1-A12 cordless screwdriver is a powerful and versatile tool that is suitable for a wide variety of screwdriving applications. It is ideal for use in tight spaces or on overhead work, and its compact design makes it easy to maneuver. The SID 1-A12 is also equipped with a number of features that make it a great choice for professional users, including:

  • A brushless motor that provides more power and longer runtime than brushed motors
  • A metal gearbox that is durable and long-lasting
  • A variable speed trigger that allows you to control the speed of the screwdriver
Montageanleitung de
Assembly Instructions en
Instruction de montage fr
I
struzioni per il montaggio it
Instrucciones de montaje es
Instruções de montagem pt
Montagehandleiding nl
Samlevejledning da
Monteringsanvisning sv
Monteringsveiledning no
Asennusohje fi
Összeszerelési útmutató hu
Instrukcja montażu
pl
Инструкция по сборке ru
Návod na montáž sk
Uputstvo za montažu hr
Navodila za montažo sl
DSH FSC
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
1
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
2 3
4 5
6 7
@
@
;
=
;
% &
+
)
%
( +
+
)
)
(
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
8 9
10 11
12 13
§
·
:
;
$
£
£
$
Q
⁄¡
¡
Q
/
/
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
14 15
16 17
¡
¡
;
Q
Q
⁄¡
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
18 19
20
21 22
W
R
E
Z
T
E
Z
R
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
23 24
25 26
U
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
2
en
DSH-FSC floor saw cart assembly instructions
1
. Safety precautions
G Use this floor saw cart only in conjunction with the Hilti DSH 700 or DSH 900 gas
saws.
G Observe the instructions and safety precautions listed in the operating instruc-
t
ions for your Hilti gas saw.
2. Assembling the floor saw cart
2.1 Fitting the handle
Fit the handle 햲 to the frame 햳 and secure it with the screw knob 햴.
2.2 Fitting the wheel axle to the frame
Push the wheel axle 햵 into the holes in the frame 햳 and secure it with the screw
knob 햶.
2.3 Fitting the second wheel
Secure the second wheel 햷 on the wheel axle 햵 by fitting the washer 햸 and split
pin 햹.
2.4 Fitting the front wheel
Fit the front wheel 햺 to the front wheel axle 햾 and secure it with the washer 햻
and split pin 햽.
2.5 Fitting the spray guard
Use the two the screws 헀 to secure the spray guard 햿 to the frame 햳.
10
5
11
98
76
4
32
G Note: The machine mount is set in such a way that the saw arm of the DSH 900-
40 gas saw does not come into contact with the floor when cutting to full depth.
When used with the DSH 900-35, DSH 700-35 and DSH 700-30, the machine
mount must be fitted in a lower position in order to reach full cutting depth.
3.1 Disassembling the machine mount
Remove both hex. nuts 헁 and screws 헂 from the machine mount 헃.
3.2 Fitting the machine mount in the lower position
Insert the two screws 헂 in the upper openings in the machine mount 헃 and secure
the machine mount to the frame 햳 once again.
G Note: When fitting the machine mount, take care to ensure it is aligned centrally.
161514
1312
3. Adjusting the machine mount
4
. Adjusting for straight running
G Note: The floor saw cart is designed so that the gas saw cuts in a straight line
when the mark on the machine mount is in the middle position. If it is found that
the gas saw pulls to one side while cutting, this can be compensated by adjust-
i
ng the position of the machine mount.
4.1 Adjusting the machine mount for straight running
Release the upper hex. nut 헁 on the machine mount 헃 and pivot the rear of the
machine mount toward the side to which the saw tends to pull when cutting.
17
5. Fitting the gas saw to
1
8
2
6
1. Bring the height adjustment lever 헄 into the upper position.
2. Release the screw knob 헆 on the grip clamp 헅.
3. Place the gas saw in the forward section of the machine mount with its wheels
positioned as shown in the illustration and then pivot the grip of the saw
Z
into
the grip clamp 헅.
4. Secure the gas saw by tightening the screw knob 헆.
5
. Fit the water container
U
a
fter filling it.
6. Adjust the position of the handle to bring it into a comfortable working position.
7. Adjust the disc/blade guard.
01_MA_DSH_FSC_P1.qxd:01_BA_DSH_FSH_P1.qxd 7.5.2010 11:16 Uhr Seite 2
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
Hilti Corporation
LI-9494 Schaan
T
el.:+423 / 2342111
Fax:+423 / 2342965
www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan W 3787 0510 10-Pos. 1 1 Printed in Italy © 2010
Right of technical and programme changes reserved S. E. & O.
431274 / A
*431274*
431274
Printed: 07.04.2015 | Doc-Nr: PUB / 5224914 / 000 / 00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Hilti 431364 User guide

Hilti
Brand
Hilti
Model
431364
Type
User guide

Hilti 431364

The Hilti SID 1-A12 cordless screwdriver is a powerful and versatile tool that is suitable for a wide variety of screwdriving applications. It is ideal for use in tight spaces or on overhead work, and its compact design makes it easy to maneuver. The SID 1-A12 is also equipped with a number of features that make it a great choice for professional users, including:

  • A brushless motor that provides more power and longer runtime than brushed motors
  • A metal gearbox that is durable and long-lasting
  • A variable speed trigger that allows you to control the speed of the screwdriver
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents