SuperATV IN-PS-4-88-400W Installation guide

IN-PS-4-88-400W
Brand
SuperATV
Model
IN-PS-4-88-400W
Type
Installation guide

SuperATV IN-PS-4-88-400W is a power steering kit designed for Kawasaki Teryx KRX. It's engineered to enhance your riding experience by reducing steering effort and providing more precise control. The kit includes all necessary components, including a motor, ECU, wiring harness, and mounting hardware. Installation requires some mechanical skills and involves removing and replacing certain stock components. Once installed, the power steering system will provide noticeable assistance while steering, reducing fatigue and improving overall handling.

SuperATV IN-PS-4-88-400W is a power steering kit designed for Kawasaki Teryx KRX. It's engineered to enhance your riding experience by reducing steering effort and providing more precise control. The kit includes all necessary components, including a motor, ECU, wiring harness, and mounting hardware. Installation requires some mechanical skills and involves removing and replacing certain stock components. Once installed, the power steering system will provide noticeable assistance while steering, reducing fatigue and improving overall handling.

© 2023 SuperATV.com®. All Rights Reserved. IN-PS-4-88-400W ~ IN-PS-4-88-600W 4/18/2023
Item Description
A Motor Mount
B Upper Shaft
C Lower Shaft
D ECU Mount 1
E ECU Mount 2
F ECU Mount 3
INSTALLATION INSTRUCTIONS
B
C
A
D
F
Power Steering Kit: for Kawasaki Teryx® KRX™
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Thank You
For Choosing
Need help with your installation?
www.superatv.com
8:00am - 8:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
sales@superatv.com
1-855-743-3427
Read instructions and view illustrations before beginning.
(Kit contents continue on following page)
Connectors
- Do not discard packaging until product has been successfully installed.
- Discard any remaining hardware.
E
2
IN-PS-4-88-400W ~ IN-PS-4-88-600W
H*
(Kit contents continued)
Item Description
G Motor
H ECU
J Wire Harness
*Connections
- Before installing, ensure that all Gaskets in electrical connections are properly seated.
- If Gaskets are not seated use a Flathead Screwdriver to seat.
J*
if blue wire is present, cut and discard
to Battery
to ECU (H)
G*
(to Upper Shaft)
to ECU (H)
3
IN-PS-4-88-400W ~ IN-PS-4-88-600W
Removal: Keep all components removed from machine.
remove Cover
remove Storage Cover
remove Steering Wheeler
remove Meter
remove Center Control Panel
remove LH Control Panel
4
IN-PS-4-88-400W ~ IN-PS-4-88-600W
Removal continued: Keep all components removed from machine.
- Remove stock Lower Steering Shaft, Power Steering unit, and Upper Steering Shaft.
5
IN-PS-4-88-400W ~ IN-PS-4-88-600W
through Firewall
C
- Insert Lower Shaft (C) through Firewall and secure to Rack and Pinion with provided hardware on
Shaft; tighten.
- Install Motor (G) onto Lower Shaft (C) with provided hardware on Shaft; tighten.
C
G
6
IN-PS-4-88-400W ~ IN-PS-4-88-600W
M8 x 50mm
M8 Nut
Spacer
Frame
Motor Mount (A)
A
- Install Motor Mount (A) to Frame with hardware shown; do not tighten.
7
IN-PS-4-88-400W ~ IN-PS-4-88-600W
- Secure Motor (G) to Motor Mount (A) with hardware shown; tighten.
4x - M8 x 20mm
8
IN-PS-4-88-400W ~ IN-PS-4-88-600W
D
- install ECU Mount 1 (D) and ECU Mount 3 (F) to ECU (H) with hardware shown; tighten.
H
2 each
F
M8 x 25mm
4X
M8 Nut
M8 x 25mm
9
IN-PS-4-88-400W ~ IN-PS-4-88-600W
2 each
M8 Nut
M8 x 25mm
- Install ECU Mount assembly to Frame with
hardware shown; tighten hardware.
E
F
(Driver Side)
Frame
F
10
IN-PS-4-88-400W ~ IN-PS-4-88-600W
B
provided
- Secure Upper Shaft (B) to Motor (G) with provided hardware on Shaft.
- Tighten all Upper Shaft (B) hardware.
- Secure Upper Shaft (B) to stock.
- Reconnect Steering Column.
11
IN-PS-4-88-400W ~ IN-PS-4-88-600W
Plug Function
A Motor
B Main Power and Ground
CNon-Contact Torque Sensor
D Key-On Power, Speed Sensor Wire, and LED
D
A
B
C
ECU Functions
When activated, LED Diagnostic Light will
ash once for about 1 second before turning
o indicating proper function. Should dierent
patterns occur, contact SuperATV.
LED Diagnostic Light
J
Secure in a visible location
Wiring Details
connect White Wire from Harness (J) here
- Plug in Wiring Harness (J) and Motor (G) connections to ECU.
- Tighten all hardware completely.
- Reinstall applicable stock components; see page 3.
12
IN-PS-4-88-400W ~ IN-PS-4-88-600W
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty
provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact
SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine
and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and
appropriate riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement
parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any
product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the
product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered
by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary
depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle
safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to
hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all
applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any
violation thereof.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

SuperATV IN-PS-4-88-400W Installation guide

IN-PS-4-88-400W
Brand
SuperATV
Model
IN-PS-4-88-400W
Type
Installation guide

SuperATV IN-PS-4-88-400W is a power steering kit designed for Kawasaki Teryx KRX. It's engineered to enhance your riding experience by reducing steering effort and providing more precise control. The kit includes all necessary components, including a motor, ECU, wiring harness, and mounting hardware. Installation requires some mechanical skills and involves removing and replacing certain stock components. Once installed, the power steering system will provide noticeable assistance while steering, reducing fatigue and improving overall handling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents