Toto TBW01001 Series is a shower column that provides a luxurious and versatile showering experience. It features a handheld shower with multiple spray patterns, a fixed showerhead for a wider coverage, and a sleek design that complements any bathroom décor. The thermostatic mixing valve maintains a consistent water temperature, preventing scalding or cold shocks. Additionally, the shower column is equipped with a water-saving feature that helps reduce water consumption without compromising on performance.
Toto TBW01001 Series is a shower column that provides a luxurious and versatile showering experience. It features a handheld shower with multiple spray patterns, a fixed showerhead for a wider coverage, and a sleek design that complements any bathroom décor. The thermostatic mixing valve maintains a consistent water temperature, preventing scalding or cold shocks. Additionally, the shower column is equipped with a water-saving feature that helps reduce water consumption without compromising on performance.
1 2
Contents
Contents
Contents
Detailed list
Use condition and attentions
in construction
Attentions in construction
and maintenance
Installation completion figure
Faucet installation
1
2
3
4
5~6
7~9
The products using this detailed list include:
TBW01001* "G Shower" Shower Column (Retro Fit)(Standard Type)
TBW01002* "G Shower" Shower Column (Retro Fit)(Standard Type)
TBW02001* "G Shower" Shower Column (Retro Fit)(Contemporary Type)
TBW02002* "G Shower" Shower Column (Retro Fit)(Contemporary Type)
Detailed list
Detailed list
Conversion valve body part
Fixed shower part
Connecting bend pipe
(containing nut)
Connecting straight pipe
(containing fixing support, handheld
shower support)
Hose
Such accessories as fixed
base, etc.
Instructions for construction
Instructions for operation
1 set
1 piece
1 set
1 set
1 piece
1 set
1 copy
1 copy
3
Attentions in construction and maintenance
Warning
Do not reverse the water inlet pipe and handheld shower water outlet pipe.
Otherwise, the product will not be able be used normally.
When switching from the bath shower side to the handheld shower side or
from the handheld shower side to the bath shower side, the water
temperature may change. Please use after feeling the water temperature
with hand. Otherwise, scalding may occur.
1.
2.
Attentions
Maintenance
As the switching cartridge is a precise component, do not dismantle it without
authorization. Otherwise, such poor conditions as water leakage, etc. may be
caused.
Do not impact the product. Otherwise, failure and water leakage may be
caused.
It is imperative to use a neutral detergent in cleaning. Other detergents than
a neutral one may damage the plating coat or make the surface discolor.
Do not use any such detergent as acidic detergent and abstergent, polishing
powder, etc. containing thick particles and nylon brush. Otherwise, the
plating coat may be damaged, etc.
It is allowed to use a piece of soft cloth to wipe or use from time to time a
piece of cloth immersed in machine oil or vehicle wax to wipe. However, do
not contact with resin components. Otherwise, they may lose the gloss and
become rusty.
It is suggested not to leave it unused for a long time. Otherwise, this may
lead to internal and external rust to water faucet to such a degree that it
cannot be used any more, etc.
With the product design being updated constantly, the physical object may
not coincide with the figure. However, the basic principle for installation, use
is the same.
As a water supply inspection is made before ex-factory, there may be water
left in the faucet and this is not a problem with the product.
The product must be kept away from heat sources such as fan heaters, bath
heat lamps, etc., which may damage the surface and the internal
components of the sprayer.
1.
2.
3.
4.
5.
6.
7.
8.
9.
To maintain a beautiful appearance of the product, the user is requested to
conduct maintenance and care in the following method.
Wipe with a piece of soft cloth frequently and use a piece of soft cloth
dipped in water to wipe from time to time.
When dirt exists obviously, please use water to wash sufficiently after
wiping with a neutral detergent.
1.
2.
Use condition and attentions in construction
Use condition
Cold water supply*hot water supply pressure
Minimum pressure ………………… 0.05MPa (flow pressure)
Maximum pressure ………………… 1.0MPa (static pressure)
Recommended service pressure：
TBW01001*……0.12-0.5MPa(flow pressure)
TBW02001*……0.12-0.5MPa(flow pressure)
TBW01002*……0.15-0.5MPa(flow pressure)
TBW02002*……0.15-0.5MPa(flow pressure)
The temperature for water supply is 4~90℃. It is suggested to use the
temperature of 60±5℃. Do not use steam to supply hot water.
The ambient temperature when using the product should be above 0℃ and
below 60℃. If the temperature is not above 0℃, deformations, cracking due to
frost, etc. may occur in the handheld sprayer. Likewise, temperatures over 60℃
may result in damage to the internal components of the handheld sprayer.
To prevent internal shower damage, the shower water outlet temperature shall
not exceed 60℃. It is suggested to use a temperature below 45℃.
Being out of use for a long time may result in internal and external rust to the
faucets and being unable to be used.
If you want to scrap this product, do not treat it as you do for general household
garbage. Please follow relevant statutes to have it treated, recovered and
collected appropriately by an independent recovery system.
The product in these instructions has a cleaning function.
※ To attain the best installation and operation effect, it is recommended that
the faucet should be used with the handheld series shower and wall mounting
type bathtub faucet from TOTO.
1.
2.
3.
4.
5.
6.
7.
Attentions in construction
Warning: it means that ignoring this mark and misoperation may cause
serious personal injury and death.
Attention: it means that ignoring this mark and misoperation may cause
personal injury or property loss.
4
6
5
6
5
Installation completion figure
Installation completion figure
TBW02001* "G Shower" Shower Column (Retro Fit)(Contemporary Type)
TBW02002* "G Shower" Shower Column (Retro Fit)(Contemporary Type)
128
38
74
400
845
90°
Bath shower
outputting
water
Completion ground surface
Completion
wall surface
TBW01001* "G Shower" Shower Column (Retro Fit)(Standard Type)
TBW01002* "G Shower" Shower Column (Retro Fit)(Standard Type)
128
38
74
400
845
298±100
Lock position
G1/2
90°
Bath shower
outputting
water
Handheld shower
outputting water
Completion ground surface
Completion
wall surface
Handheld shower
(to be purchased
separately)
About
105 °
Lock release position
220
□210
Note: The unit of the above dimensions is mm. The dimensions in ( ) are
reference ones.
The customers are request to determine themselves according to the user
body height and ceiling height.
298±100
About
105 °
Lock release position
Lock position
Handheld shower
(to be purchased
separately)
Handheld shower
outputting water
Note: The unit of the above dimensions is mm. The dimensions in ( ) are
reference ones.
The customers are request to determine themselves according to the user
body height and ceiling height.
45°
45°
(Water inlet)
G1/2
(Water inlet)
(1100~1200)
(1100~1200)
8
7
Faucet installation Faucet installation
Tighten
Connecting bend pipe
O-ring
Nut
Fixing
holder
Completion wall surface
198~398
6
2
-
845mm
Figure ①
Hole depth
50mm
Spring gasket
Gasket
Base
Self-tapping screw
Foam
gasket
(white)
Expansion
pipe
Figure ②
1. Fixed base installation
① As shown in Figure ①, drill 2
installation holes for the fixed base
on the installation wall surface
(6mm in diameter and 50mm
deep).
※ In drilling holes on the wall,
please ensure that the two holes
are perpendicular to the ground in
the vertical direction.
②As shown in Figure ②, drive the
expansion pipe into the installation
hole first and fix properly the base
in the sequence as shown in the
figure with self-tapping screws.
※ The two holes at the top
and bottom are the
same in installation
method.
2. Shower connecting pipe
installation
As shown in the right figure, apply
soap water on the two O-rings on
the connecting bend pipe and
insert vertically in the connecting
straight pipe. Then tighten the nut
and fixing support.
3. Conversion valve
installation
① Apply soap water on the
O-ring for the conversion
valve body part and insert
vertically into the shower
connecting pipe.
② Adjust the fixing support
and conversion valve body
party to such a position as
being perpendicular to the
installation wall surface.
Insert vertically the properly
fixed base to fit completely
with the wall surface.
③ Use a hex wrench to
tighten in a proper order the
fastening screws for the
fixing support and body
party and confirm stable
installation.
④ Connect one hose end to
the water inlet connector
under the switching valve
(the one close to the
installation wall surface is
water inlet connector).
Connect the other end to the
water outlet connector under
the bathroom faucet (to be
purchased separately by
customers). Pay attention to
using gasket for sealing.
⑤ Connect the handheld
shower (to be purchased
separately by customers)
with the shower hose and
connect the other end to the
water outlet connector of the
conversion valve (the one
close to the converting
handle side is water outlet
connector). Just place the
handheld shower on the
handheld shower support.
Connecting straight pipe
Conversion
valve body
part
Handheld
shower
support
Bathroom faucet
(to be purchased separately)
Handheld
shower support
(to be purchased
separately)
Shower
connecting
pipe
Conversion
valve body
part
Shower
connecting
pipe
Fixing support
Fixed base
Fixed base
Fastening screw
Fastening screw
Handheld shower
support
O-ring
Conversion
valve body
part
Water outlet
connector
Water inlet connector
※The water outlet connector can rotate
360°.Customers can adjust the direction
of the connector according to their needs
in the process of using.(The anticlockwise
rotation is the dismantle direction.)
Attention:
① The bath rod at the upper end of the products of the present series has
200mm range for rising and falling. In determining the installation position of
the installation hole, please pay attention that a
sufficient space should be reserved above the
hole.
② The connecting straight pipe and the
conversion valve body part of this series of
products can be pulled out. Please hold the
conversion valve body part with your hand to
avoid falling by self weight and causing loss.
TOTO Asia Oceania Pte. Ltd.
Telephone:65-6744-6955
FAX: 65-6841-0819
Address：10 Eunos Road 8 #12-07 Singapore Post Centre
Singapore 408600
Website:asia.toto.com
TOTO KOREA LTD.
전화번호 : (02)-3141-8236
FAX 번호 : (02)-3141-8240
주소 : 서울시 마포구 상수동 351-16번지 로이코빌딩 3층
홈페이지 : http://www.totokr.co.kr
9
9
Faucet installation
Wrench
Bath shower
Shower connecting pipe
Lock screw
Hex wrench
Gasket filter net
After the shower head is
screwed tight, rotate the
shower head to confirm
that no nut becomes loose
Use a wrench to fasten the bath shower and the screw thread end of the
connecting bend pipe. Adjust the bath shower to make the water outlet
side of the bath shower face downward. Use a hex wrench to tighten the
lock screws.
4. Bath shower installation
Be careful not to hurt
the pipe during
-
1
-
2
-
3
-
4
-
5
Toto TBW01001 Series is a shower column that provides a luxurious and versatile showering experience. It features a handheld shower with multiple spray patterns, a fixed showerhead for a wider coverage, and a sleek design that complements any bathroom décor. The thermostatic mixing valve maintains a consistent water temperature, preventing scalding or cold shocks. Additionally, the shower column is equipped with a water-saving feature that helps reduce water consumption without compromising on performance.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ALFI BRAND RAIN24R-PSS Installation guide
-
-
-
-
-
Novus 961+0119+000 Datasheet
-
GIVING TREE XLHDDTSH0017 Installation guide
-
-
-
YASINU CTMS-LQ-749MB Installation guide