Introduction 15
• The
Dell OpenManage Server Administrator Messages Reference Guide
lists the
messages that are displayed in your Server Administrator home page Alert log
or on your operating system’s event viewer. This guide explains the text,
severity, and cause of each alert message that Server Administrator issues.
• The
Dell OpenManage Server Administrator Command Line Interface
User's Guide
documents the complete command line interface (CLI) for
Server Administrator, including an explanation of CLI commands to view
system status, access logs, create reports, configure various component
parameters, and set critical thresholds.
• The
Dell Remote Access Controller Installation and Setup Guide
provides
complete information about installing and configuring a DRAC III,
DRAC III/XT, and an ERA/O controller, configuring an ERA controller,
and using a RAC to remotely access an inoperable system.
•The
Dell OpenManage Baseboard Management Controller Utilities User’s
Guide
provides information about installing and using the baseboard
management controller.
• The
Dell Remote Access Controller 4 User’s Guide
provides complete
information about installing and configuring a DRAC 4 controller and
using DRAC 4 to remotely access an inoperable system.
• The
Dell Remote Access Controller Modular Chassis User's Guide
provides
complete information about configuring and using the DRAC/MC to
remotely manage and monitor your modular system and its shared
resources through a network.
• The
Dell Remote Access Controller 5 User’s Guide
provides complete
information about installing and configuring a DRAC 5 controller and
using DRAC 5 to remotely access an inoperable system.
• The
Integrated Dell Remote Access Controller User’s Guide
provides
complete information about installing and configuring an iDRAC and
using it to remotely access an inoperable system.
• The
Chassis Management Controller User’s Guide
provides complete
information about installing and configuring the CMC and using it to
remotely access an inoperable system.
The Dell Chassis Management
Controller (CMC) is a hot-pluggable systems management hardware and
software solution designed to provide remote management capabilities
and power control functions for the Dell M1000e chassis systems.