GE ISOVOLT Titan E Quick start guide

ISOVOLT Titan E
GE
Brand
GE
Model
ISOVOLT Titan E
Category
Flat panel accessories
Type
Quick start guide
GE Inspection Technologies
Xray
Water Turbine Flow Rate Monitor
SEIFERT Flow Rate Monitor
GEInspectionTechnologies.com
©2004 General Electric Company. All rights reserved. GEIT-30061GB (5/04)
We reserve the right to technical modifications without prior notice.
The fail-safe water turbine flow rate
monitor is used to monitor the cooling
water flow when operating an ISOVOLT
X-ray tube with coolant from the tap water
supply.
The flow rate monitor is factory set and
ready for installation.
Technical Data
Supply voltage 230 V +/- 10%
Switched voltage 230 V , 125 VA
Water flow rate
disconnect at 4 l / min
reconnect at approx. 4.5 l / min
Delivery Scope
Water turbine flow rate monitor
consisting of:
- flow rate monitor RRI 10, incl.
- plug-on electronics ESK 1
- hose nozzles
at the in- and output side
- 5 m cable, completely mounted
with M16 plug, mounting
brackets, screws and dowels
Application
  • Page 1 1

GE ISOVOLT Titan E Quick start guide

ISOVOLT Titan E
GE
Brand
GE
Model
ISOVOLT Titan E
Category
Flat panel accessories
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents