Ryvyr M-KENT-24BE Installation guide

Category
Equipment cleansing kit
Type
Installation guide

This manual is also suitable for

TM
TM
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
INSTALLATION INSTRUCTIONS
KENT
MIRROR
M-KENT-24DK / M-KENT-24WT
Rev 3/07
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any
installation problems, please don’t hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new product and inspect for
damage.
The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver Level Drill Tape Measure Safety Glasses
10'
ROUGH-IN DIMENSIONS
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
Rev 3/07
• Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft dry cloth. When cleaning the mirror, spray the
mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.
CARE AND CLEANING
1
MIRROR INSTALLATION
2
Finished Wall
  • Page 1 1
  • Page 2 2

Ryvyr M-KENT-24BE Installation guide

Category
Equipment cleansing kit
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI