Ryvyr M-KENT-24BE, M-KENT-24WW Installation guide

Hello! I am an AI chatbot trained to assist you with the Ryvyr M-KENT-24BE Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time

INSTALLATION INSTRUCTIONS

KENT

MIRROR

M-KENT-24DK / M-KENT-24WT

Rev 3/07

THANK YOU FOR CHOOSING XYLEM

Please take a few minutes to review this manual before you start installation. If you encounter any

installation problems, please don’t hesitate to contact us.

Before you begin, please observe all local building codes. Unpack the new product and inspect for

damage.

The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply.

SUGGESTED TOOLS AND MATERIALS

Philips Screwdriver Level Drill Tape Measure Safety Glasses

10'

ROUGH-IN DIMENSIONS

For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time

Rev 3/07

• Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft dry cloth. When cleaning the mirror, spray the

mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.

CARE AND CLEANING

MIRROR INSTALLATION

Finished Wall