Spalding M8554411 User manual

Spalding
Brand
Spalding
Model
M8554411
Category
Fitness, gymnastics & weight training
Type
User manual

This manual is also suitable for

Spalding M8554411 is a high-end residential in-ground basketball system that is perfect for families and recreational players.

  • Durable construction: The system is made of heavy-duty steel and is designed to withstand the elements and years of use.
  • Adjustable height: The backboard can be adjusted from 6'6" to 10' high, making it suitable for players of all ages and skill levels.
  • Easy to assemble: The system comes with detailed instructions and can be assembled in a few hours by two people.
  • Safe to use: The system meets all safety standards and includes features like a padded backboard and a breakaway rim.

Spalding M8554411 is a high-end residential in-ground basketball system that is perfect for families and recreational players.

  • Durable construction: The system is made of heavy-duty steel and is designed to withstand the elements and years of use.
  • Adjustable height: The backboard can be adjusted from 6'6" to 10' high, making it suitable for players of all ages and skill levels.
  • Easy to assemble: The system comes with detailed instructions and can be assembled in a few hours by two people.
  • Safe to use: The system meets all safety standards and includes features like a padded backboard and a breakaway rim.
1
10/05 ID# M88724C
High End Residential
In-Ground Basketball System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Toll-Free Customer Service Number for U.S: 1-800-334-9111
Hydra-Rib Internet Address: http://www.hydra-rib.com
Spalding Internet Address: http://www.spalding.com
Write Model Number
From Box Here:
WARNING!
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
2
ID# M88724C 10/05
IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL
Owner must ensure that all players know and follow these rules
for safe operation of the system.
WARNING
•
DO NOT HANG on the rim or any part of the system including
backboard, support braces or net.
•
During play, especially when performing dunk type activities,
keep player's face away from the backboard, rim and net.
Serious injury could occur if teeth/face come in contact with
backboard, rim or net.
•
Do not slide, climb, shake or play on base and/or pole.
•
When adjusting height or moving system, keep hands and
fingers away from moving parts.
•
Do not allow children to move or adjust system.
•
During play, do not wear jewelry (rings, watches, necklaces,
etc.). Objects may entangle in net.
•
Keep organic material away from pole base. Grass, litter, etc.
could cause corrosion and/or deterioration.
•
Check pole system for signs of corrosion (rust, pitting,
chipping) and repaint with exterior enamel paint. If rust has
penetrated through the steel anywhere, replace pole
immediately.
•
Check system before each use for proper ballast, loose
hardware, excessive wear and signs corrosion and repair
before use.
•
Check system before each use for instability.
•
Never play on damaged equipment.
•
Keep pole top covered with cap at all times.
•
See instruction manual for proper installation and
maintenance.
Read and understand warnings listed
below before using this product.
Failure to follow these warnings may
result in serious injury and/or property
damage.
ID#: 588000 01/05
I
n the U.S.: 1-800-xxx-xxxx
Canada: 1-800-xxx-xxxx
In the U.S.: 1-800-xxx-xxxx
Canada: 1-800-xxx-xxxx
In the U.S.: 1-800-xxx-xxxx
Canada: 1-800-xxx-xxxx
In the U.S.: 1-800-xxx-xxxx
Canada: 1-800-xxx-xxxx
SAFETY INSTRUCTIONS
Most injuries are caused by misuse and/or not following instructions.
Use caution when using this system.
• If using a ladder during assembly, use extreme caution.
• Two (2) people are recommended for this operation.
• Before digging, contact utility company to locate underground power
cables, gas, and water lines. Ensure there are no overhead power lines
within 20 ft. (7 m) radius of pole location.
• Climate, corrosion, excessive use, or misuse could result in system
failure.
• If technical assistance is required, contact Customer Service.
• Minimum operational height is 6'6" (1.98 m) to the bottom of backboard.
• This equipment is intended for home recreational use only and NOT
excessive competitive play.
• Read and understand the warning label affixed to pole.
• The life of your basketball pole depends on many conditions. The
climate, placement of the pole, the location of the pole, exposure to
corrosives such as pesticides, herbicides or salts are all important.
• Adult supervision is recommended when adjusting height.
• Serious injury could occur if teeth/face come in contact with backboard,
net, or rim.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY.
Owner must ensure that all players know and
f
ollow these rules for safe operation of the system.
To ensure safety, do not attempt to assemble this system without following the
i
nstructions carefully. Proper and complete assembly, use and supervision is
e
ssential for proper operation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this system is not installed,
m
aintained, and operated properly. Check entire box and inside all packing
material for parts and/or additional instructional material. Before beginning
assembly, read the instructions and identify parts using the hardware identifier
a
nd parts list in this document.
For more information on assembly, placement, proper use and maintenance,
visit The American Basketball Council website at http://www.smarthoops.com.
REQUIRED TOOLS AND MATERIALS:
• 3 People
• Carpenter’s Level
•
15’ Tape Measure
• Shovel & Post Hole
Digger
•
Wood Board (scrap)
• (2) Stepladders 8 ft. (2.4 m)
•
Safety Goggles
•
•
Container to Mix
•
(2 each) Wrenches and/or Socket Wrenches and
Sockets (Deep-Well Sockets are Recommended).
1/2"
9/16"
3/4"
15/16"
• Optional: Large &
Small Adjustable
Wrenches
1/2" 9/16" 3/4"
15/16"
• (1) Utility Knife
• Phillips-Head
Screwdriver
Item Qty. Part No. Description
1 1 968880 Pole
2 1 998880 Plate, Anchor, Black
3 1 Rim Assembly
4 1 Net
5 4 203017 Nut, Hex, 3/8-16
6
4 203300 Washer, 3/8 Locking, .380 I.D., .63 O.D.
7 2 250001 Bolt, Hex, Tap, 3/8-16 x 4” Long
8 2* 250002 Bolt, Hex, Tap, 3/8-16 x 2” Long
9 1 203457 Label, Logo, Vinyl, 2.3” x 2.7”
10 1 Backboard
11 1 516000 Label, Height Adjustment
12 1 204940 Screw Jack
13 2 220563 Screw, 1/4-20 x 1/2” Long, Rim Cover
14 1 80854501 Rod, Threaded Assembly, 5/8-11 x 19.8”, Zinc
15 4 203309 Washer, Flat, 3/8”
16 1 Cover, Rim
17 1 978880 Yoke, Upper, Center, Pole
18 1 988883 Yoke, Lower, Center, Pole
19 4 200573 Bolt, J, 5/8-11 x 24, 3” Thread
20 1 203630 Bolt, Hex, 1/2-13 x 5, Black Oxide
21 16 203635 Washer, Flat, .053 I.D., 1.08 O.D., Black Oxide
22 10 203637 Nut, Lock, Nylon Insert, 1/2-13, Black Oxide
23 1* 203641 Bolt, Hex Head, 1/2”-13 x 6”
24 9 204046 Washer, 5/8 Flat, .656 I.D., 1.313 O.D., Black Oxide
25 12 204057 Nut, Hex, 5/8-11, Black Oxide
26 1 205008 Nut, Hex, 5/8-11, Grade 8
27 2 202666 Name Plate, Hydra-Rib or
204521 Name Plate, Spalding
28 3 204728 Bolt, Hex, 1/2-13 x 9.25, Black Oxide
29 4 204733 Screw, #8, .50 Long
30 2 204735 Height Indicator, Plastic
31 1 204741 Label, Height Indicator, Right
32 1 204742 Label, Height Indicator, Left
33 2* 206311 Spacer, .52 I.D. x .75 O.D. x .5” Long, Plastic
34 4 205254 Bolt, Hex, 1/2-13 x 2.5, Black Zinc
35
1 204921 Washer, Barrel
36 1 204922 Pin, Hitch
37 1 204923 Pin, Cotter, #8
38
14
204670A Bushing, Plastic
39 4 204670B Bushing, Plastic
40 8 204670C Bushing, Plastic
* You May Have Extra Parts With This Model.
PARTS LIST
ID# 516000 06/05
11
3
10/05 ID# M88724C
4
ID# M88724C 10/05
Item #5 (4)
Item #13 (2)
Item #34 (4)
Item #24 (9)
Item #7 (2)
Item #8 (2)*
Item #29 (4)
Item #28 (3)
Item #20 (1)
Item #23 (1)*
Item #25 (12)
Item #26 (1)
Item #22 (10)
Item #36 (1)
Item #37 (1)
HARDWARE IDENTIFIER (NUTS, WASHERS & SPACERS)
HARDWARE IDENTIFIER (BOLTS & SCREWS)
Item #35 (1)
Item #38 (14)
Item #39 (4)
Item #40 (8)
HARDWARE IDENTIFIER (OTHER—NOT ACTUAL SIZE)
Item #21 (16)
Item #6 (4)
Item #33 (2)*
Item #15 (4)*
5
10/05 ID# M88724C
Ensure ground is level with playing surface, then dig pole hole.
Inst
all threaded ends of J-bolt
s (19) through holes
in mounting plate (2) and secure as shown.
2
25
25
25
19
19
Install nut (25) to J-bolt (19) as
shown. Repeat procedure for
remaining three J-bolts (19).
2.75”
(7 cm)
CONTACT UTILITIES
BEFORE DIGGING.
WARNING!
24" (61 cm)
48" (121.9 cm)
PLAYING SURFACE
GROUND SURFACE
24" (61 cm)
48" (121.9 cm)
IMPORTANT!
Make sure nuts (25)
are 2.75” (7 cm) from
top of J-bolts
Make sure J-bolts (19) are in the illustrated position.
Nuts on the top of plate are used for leveling the pole after
system is fully assembled.
NOTE:
1.
3.
2.
6
ID# M88724C 10/05
Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to release
any air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to
level mounting plate on top of drainage hill. Level mounting plate and square with playing surface.
Clean off any excess cement on mounting plate at this time and place washers (24) onto J-bolts.
1" (2.54 cm)
SIDE VIEW
DRAINAGE HILL
PLAYING SURFACE
Fill hole with concrete. Tamp down concrete to release air pockets
and build drainage hill.
IMPORTANT!:
WAIT A MINIMUM
OF 72 HOURS BEFORE GOING ON
TO NEXT STEP. CONCRETE MUST
CURE. ALLOW ADDITIONAL TIME
FOR COLD, WET OR HUMID WEATHER.
IMPORTANT!
Front of mounting plate (2)
must be parallel with
playing surface.
2
IMPORTANT!
Check leveling of mounting plate
several times with carpenter’s level
while concrete is curing.
4.
5.
24
24
24
24
PLAYING SURFACE
7
10/05 ID# M88724C
I
nsert bushings (38, 39, 40) into
areas shown.
38
38
38
1
10
39
39
17
18
40
40
40
40
40
40
40
40
39
39
6.
38
38
38
38
38
38
38
40
39
IMPORTANT!
Bushing
types are
identified
with a letter.
8
ID# M88724C 10/05
Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes in
m
ounting plate (2) as shown.
7A.
22
28
1
PLAYING SURFACE
2
Insert bolt (28) through holes in plate and pole and secure with nut (22).
7B.
PLAYING SURFACE
SCRAP WOOD
(NOT INCLUDED)
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
1
1
9
10/05 ID# M88724C
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
8.
TWO people are required to lift pole into
p
osition so that the threaded assembly
rod (14) can be installed and secured by
the THIRD person.
While pole is being supported by TWO
capable adults, position rod (14) and lock
into place with hitch pin (36) and cotter
pin (37).
Slide barrel washer (35) onto other end of
rod (14) and secure with washer (24) and
nut (26). Tighten nut (26) until it is
positioned 3-3/4” from the end of the
rod (14) as shown (Figure A).
PLAYING
SURF
ACE
PLAYING
SURF
ACE
26
24
35
37
36
14
Completed Assembly
3-3/4”
FIGURE
A.
1
1
14
26
10
ID# M88724C 10/05
While still in forward position, attach both upper
and lower yokes (17 & 18) to pole as shown.
9.
22
21
28
21
17
18
THREE PEOPLE
R
EQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
11
10/05 ID# M88724C
Attach elevator adjustment (12) to
lower yoke (18).
10.
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
22
12
38
21
20
18
21
38
38
12
ID# M88724C 10/05
Attach elevator adjustment (12) to pole bracket.
11.
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
12
23
21
22
33
33
21
13
10/05 ID# M88724C
Attach backboard (10) to upper and lower
yokes (18 & 17).
First attach board (10) to upper yoke (17),
using TWO people to hold the board and
ONE person to attach hardware (FIG. A).
Use hardware as shown in FIG. B.
12.
A.
FIG. A
FIG. C
Then, hinge board to match up with holes in
lower yoke (18), FIG. C, and secure with
hardware as shown in FIG. D.
21
22
21
10
FIG. B
22
21
21
34
34
21
22
21
FIG. D
22
21
21
34
34
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
B.
10
14
ID# M88724C 10/05
13.
5
8
Refer To Instructions
Included With Rim
Hardware For Rim
Assembly.
Before starting rim assembly, tighten nut (26) until it is positioned 6-3/4” from
the end of the rod (14) as shown (Figure A).
Remove rim cover (16), attach rim assembly (3) to backboard (10) and
r
eattach rim cover (16).
** For rim assembly, see instructions included with rim.
3
Rim Assembly
6
6
10
7
IMPORTANT!
Carefully cut and peel
protective film away from
board prior to attaching rim.
16
6-3/4”
FIGURE
A.
15
15
26
14
15
10/05 ID# M88724C
14.
A.
B.
15.
Apply height indicator
labels (32 & 31) to height
indicators (30).
2.
4.
3.
1.
Install net (4) to rim as shown.
7
8
9
10
7
8
9
10
78
9
10
78
9
10
7
8
9
10
7
8
9
10
78
9
1
0
7
8
9
10
78
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
78
9
10
78
9
10
7
8
9
10
7
8
9
10
78
9
10
7
8
9
10
78
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
IMPORTANT!
NOTE ORIENTATION
OF HEIGHT
INDICATORS:
10’
MARK SHOULD
FACE AWAY FROM
BACKBOARD.
Set-up For Right SideSet-up For Left Side
7
8
9
10
7
8
9
10
78
9
10
78
9
10
7
8
9
10
7
8
9
10
78
9
10
7
8
9
10
78
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
29
29
32
31
30
30
Attach height indicators to lower yoke in area shown by turning
screws (29) into place with a Phillips head screwdriver. Apply name
plate sticker (27) to lower yoke as shown.
Attach height indicators
to lower yoke in area
shown by tapping
screws (29) into place
with a rubber mallet.
Apply name plate
sticker (27) to lower
yoke as shown.
C
27
27
16
ID# M88724C 10/05
7
PLAYING
SURF
ACE
WAR
NING
F
A
I
L
U
R
E
T
O
FO
L
L
O
W
TH
E
S
E
W
A
R
N
I
N
G
S
M
A
Y
R
E
S
U
L
T
I
N
S
E
R
I
O
U
S
I
N
J
U
R
Y
A
N
D
/
O
R
P
R
O
P
E
R
TY
D
A
M
A
G
E
.
O
w
n
e
r
m
u
s
t
e
n
s
u
r
e
t
h
a
t
a
l
l
p
l
a
y
e
r
s
k
n
o
w
a
n
d
f
o
l
l
o
w
t
h
e
s
e
r
u
l
e
s
f
o
r
s
a
f
e
o
p
e
r
a
t
i
o
n
o
f
t
h
e
s
y
s
t
e
m
.
•
S
e
e
i
n
s
t
r
u
c
t
i
o
n
m
a
n
u
a
l
f
o
r
p
r
o
p
e
r
i
n
s
t
a
l
l
a
t
i
o
n
.
•
D
O
N
O
T
H
A
N
G
o
n
t
h
e
r
i
m
o
r
a
n
y
p
a
r
t
o
f
t
h
e
s
y
s
t
e
m
i
n
c
l
u
d
i
n
g
b
a
c
k
b
o
a
r
d
,
s
u
p
p
o
r
t
b
r
a
c
e
s
o
r
n
e
t
.
•
D
u
r
i
n
g
p
l
a
y
,
e
s
p
e
c
i
a
l
l
y
w
h
e
n
p
e
r
f
o
r
m
i
n
g
d
u
n
k
t
y
p
e
a
c
t
i
v
i
t
i
e
s
,
k
e
e
p
p
l
a
y
e
r
's
f
a
c
e
a
w
a
y
f
r
o
m
t
h
e
b
a
c
k
b
o
a
r
d
,
r
i
m
a
n
d
n
e
t
.
S
e
r
i
o
u
s
i
n
j
u
r
y
c
o
u
l
d
o
c
c
u
r
i
f
t
e
e
t
h
/
f
a
c
e
c
o
m
e
i
n
c
o
n
t
a
c
t
w
i
t
h
b
a
c
k
b
o
a
r
d
,
r
i
m
o
r
n
e
t
.
•
D
o
n
o
t
s
l
i
d
e
,
c
l
i
m
b
,
s
h
a
k
e
o
r
p
l
a
y
o
n
p
o
l
e
.
•
W
h
e
n
a
d
j
u
s
t
i
n
g
h
e
i
g
h
t
,
k
e
e
p
h
a
n
d
s
a
n
d
f
i
n
g
e
r
s
a
w
a
y
f
r
o
m
m
o
v
i
n
g
p
a
r
t
s
.
•
D
o
n
o
t
a
l
l
o
w
c
h
i
l
d
r
e
n
t
o
m
o
v
e
o
r
a
d
j
u
s
t
s
y
s
t
e
m
.
•
D
u
r
i
n
g
p
l
a
y
,
d
o
n
o
t
w
e
a
r
j
e
w
e
l
r
y
(
r
i
n
g
s
,
w
a
t
c
h
e
s
,
n
e
c
k
l
a
c
e
s
,
e
t
c
.
)
;
o
b
j
e
c
t
s
m
a
y
e
n
t
a
n
g
l
e
i
n
n
e
t
.
•
K
e
e
p
o
r
g
a
n
i
c
m
a
t
e
r
i
a
l
a
w
a
y
f
r
o
m
p
o
l
e
b
a
s
e
.
G
r
a
s
s
,
l
i
t
t
e
r
,
e
t
c
.
c
o
u
l
d
c
a
u
s
e
c
o
r
r
o
s
i
o
n
a
n
d
o
r
d
e
t
e
r
i
o
r
a
t
i
o
n
.
•
C
h
e
c
k
p
o
l
e
s
y
s
t
e
m
f
o
r
s
i
g
n
s
o
f
c
o
r
r
o
s
i
o
n
(
r
u
s
t
,
p
i
t
t
i
n
g
,
c
h
i
p
p
i
n
g
)
a
n
d
r
e
p
a
i
n
t
w
i
t
h
w
i
t
h
e
x
t
e
r
i
o
r
e
n
a
m
e
l
p
a
i
n
t
.
I
f
r
u
s
t
h
a
s
p
e
n
e
t
r
a
t
e
d
t
h
r
o
u
g
h
t
h
e
s
t
e
e
l
a
n
y
w
h
e
r
e
,
r
e
p
l
a
c
e
t
h
e
p
o
l
e
i
m
m
e
d
i
a
t
e
l
y
.
•
C
h
e
c
k
s
y
s
t
e
m
b
e
f
o
r
e
e
a
c
h
u
s
e
f
o
r
p
r
o
p
e
r
b
a
l
l
a
s
t
,
l
o
o
s
e
h
a
r
d
w
a
r
e
,
e
x
c
e
s
s
i
v
e
w
e
a
r
a
n
d
s
i
g
n
s
c
o
r
r
o
s
i
o
n
a
n
d
r
e
p
a
i
r
b
e
f
o
r
e
u
s
i
n
g
.
•
C
h
e
c
k
s
y
s
t
e
m
b
e
f
o
r
e
e
a
c
h
u
s
e
f
o
r
i
n
s
t
a
b
i
l
i
t
y
.
•
N
e
v
e
r
p
l
a
y
o
n
d
a
m
a
g
e
d
e
q
u
i
p
m
e
n
t
.
•
K
e
e
p
p
o
l
e
t
o
p
c
o
v
e
r
e
d
w
i
t
h
c
a
p
a
t
a
l
l
t
i
m
e
s
.
2
0
1
2
5
5
2
/9
9
1
-
8
0
0
-
5
5
8
-
5
2
3
4
1
25
24
16.
1
26
THREE PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY
AND/OR PROPERTY
DAMAGE.
WARNING!
Upright pole (1) by tightening nut (26).
U
sing 15/16” wrench, turn nut (26) clockwise
to begin standing pole upright. Continue to
turn nut (26) until pole has come to rest
against washers (24) and pole is vertical.
Once pole is in its final position, install
washers (24) and nuts (25) onto J-bolts (19)
and fully tighten to secure pole to anchor
plate (2).
THREE PEOPLE REQUIRED FOR THIS
PROCEDURE.: TWO PEOPLE ARE REQUIRED TO
GUIDE AND SUPPORT THE SYSTEM WHILE THE
THIRD PERSON IS TIGHTENING NUT (26) TO
RAISE THE SYSTEM UPRIGHT.
FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
24
24
2
17
10/05 ID# M88724C
17.
After pole has been secured to anchor plate (2) loosen nut (26),
r
emove cotter pin (37), and pull out pin (36). This will allow the
removal of the threaded assembly rod (14) which is no longer
necessary for the remainder of the assembly and installation of
system.
35
37
36
24
26
14
25
ONLY AFTER THE ANCHOR
PLATE HAS BEEN FULLY
TIGHTENED: Remove cotter
pin (37) and pin (36) to
remove
threaded assembly
rod
(14) from anchor plate (2).
WARNING!
18
ID# M88724C 10/05
12
19.
Apply height adjust ment label (11).
Adjust system by turning crank until desired height is reached
per height indicator (30).
1
1
30
10 feet
(3.05 m)
READ AND UNDERSTAND
WARNING & HEIGHT
ADJUSTMENT LABELS
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
WARNING!
Check system leveling. Pole (1)
should be level in all directions.
After system is leveled, completely
tighten all nuts (25).
18.
If adjustment is
necessary, adjust
system by rotating
the nuts (25) between
anchor plate (2) and
pole flange.
NOTE:
25
1
2
19
10/05 ID# M88724C
LIMITED LIFETIME WARRANTY
Subject to proper installation and normal use, Hydra-Rib
®
warrants, subject to limitations below, to the original retail
purchaser all structural components of the Hydra-Rib
®
system to be free of defects in material and workmanship
for the duration of ownership by the original retail
purchaser.
Merchandise must be shipped prepaid with a copy of proof
of purchase to our factory for examination to see whether
it needs to be repaired or replaced. Any labor costs,
travel expenses and any other charges involved in the
removal, installation or replacement of the
defective/repaired parts from/to your Hydra-Rib
®
system
will be your (the purchaser’s) responsibility. Shipping
charges for replaced or warranted merchandise being
sent back to the customer from our factory must be
prepaid by the customer in advance. If not, the
replacement shipment will be sent out collect.
What is Not Covered By This Warranty
Paint or rusted parts. Paint kits will be available to assist in
normal maintenance.
RIM
HANGING ON THE RIM WILL
VOID
YOUR WARRANTY.
RIms are not warranted for any defects other than
workmanship. Torn back plates, damaged springs, bent
rings, damaged eye bolts, and torn or distorted rim
supports result from hanging on the rim and are not
warranted.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Spalding M8554411 User manual

Spalding
Brand
Spalding
Model
M8554411
Category
Fitness, gymnastics & weight training
Type
User manual
This manual is also suitable for

Spalding M8554411 is a high-end residential in-ground basketball system that is perfect for families and recreational players.

  • Durable construction: The system is made of heavy-duty steel and is designed to withstand the elements and years of use.
  • Adjustable height: The backboard can be adjusted from 6'6" to 10' high, making it suitable for players of all ages and skill levels.
  • Easy to assemble: The system comes with detailed instructions and can be assembled in a few hours by two people.
  • Safe to use: The system meets all safety standards and includes features like a padded backboard and a breakaway rim.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents