SoftWall Finishing Systems SW9729667021 Installation guide

Brand
SoftWall Finishing Systems
Model
SW9729667021
Category
Knives
Type
Installation guide

SoftWall Finishing Systems SW9729667021 is a versatile acoustic wall panel system that can be used to create a variety of different looks and configurations. The system includes a variety of components, including full panels, split panels, and corner rails, that can be combined to create custom wall sections. The panels are made of fiberglass and are covered in a choice of fabric, making them both durable and attractive.

SoftWall Finishing Systems SW9729667021 is easy to install and can be used in a variety of applications, including offices, schools, hospitals, and homes. The system can be used to create sound-absorbing walls, decorative walls, or even privacy screens.

SoftWall Finishing Systems SW9729667021 is a versatile acoustic wall panel system that can be used to create a variety of different looks and configurations. The system includes a variety of components, including full panels, split panels, and corner rails, that can be combined to create custom wall sections. The panels are made of fiberglass and are covered in a choice of fabric, making them both durable and attractive.

SoftWall Finishing Systems SW9729667021 is easy to install and can be used in a variety of applications, including offices, schools, hospitals, and homes. The system can be used to create sound-absorbing walls, decorative walls, or even privacy screens.

Kit Types Available: (Each kit sold separately)
Full Panel 2-Pack Kit
Includes 2 full 49”W x 97”H fiberglass acoustic wall
panels covered in choice of fabric, railing system com-
ponents, installation roller and instruction manual.
Split Panel Bottom-Only 2-Pack Kit
Includes 2 split 49”W x 32”H fiberglass acoustic wall
panels covered in choice of fabric, railing system com-
ponents, installation roller and instruction manual. This
kit must be combined with the Split Panel Top-Only
2-Pack Kit to make a full 98”W x 97”H wall section.
Split Panel Top-Only 2-Pack Kit
Includes 2 split 49”W x 65”H fiberglass acoustic wall
panels covered in choice of fabric. This kit must be
combined with the Split Panel Bottom-Only 2-Pack
Kit to make a full 98”W x 97”H wall section.
Outside Corner Rail Installation Extrusion
Includes one 96”L outside corner vinyl rail installa-
tion extrusion. This extrusion must be ordered to
connect wall panels that intersect on a 90 degree
outside corner.
Additional Items Needed For Installation:
• Installation Roller (included with each total order)
• Construction Adhesive
• Spray Adhesive
• Utility Knife
• 5/8” Flat Head Screws
• Tape Measure
• Laser Level
• Circular Saw or Miter Box Saw
STEP 1: Calculate Number of Kits Needed
Measure the length (in feet) of each wall being covered.
Add all wall lengths together and divide by 8. The total
equals the number of kits needed. Always round up to
the next whole number.
Example: 24’ wall ÷ 8 = 3.
A total of 3 kits are needed to finish this wall.
Installation Instructions
Full Panel 2-Pack Kit
Full Panels Split Panels
Top
Bottom
STEP 2: Mount Polystyrene Strips
Mount polystyrene strips directly to masonry walls or
drywall using construction adhesive at the bottom of
the drop ceiling, base of walls and every two feet on
center.
For installation on wood or metal studs, skip to Step
3.
STEP 3: Mount Vinyl Rails
Install vinyl rail extrusions over the polystyrene strips
using construction adhesive. Use 5/8” flat head
screws to secure rails until adhesive cures.
For installation on wood or metal studs, screw vinyl rail
extrusions directly to studs.
STEP 4: Insert Wall Panels
Measure the height of your walls and cut your acoustic
wall panels accordingly using a utility knife. Be careful
not to cut through fabric on the front side.
Slide panel into the top rail first, then slide into the
bottom rail.
STEP 5: Tuck Fabric Edges
Once all panels are in place and adhesives have cured,
tuck in the fabric edges along the vinyl rails.
Using the installation roller included, seat the fabric in
the vertical vinyl rails along each edge. Work from top
to bottom using short up and down strokes.
STEP 6: Add Trim (Optional)
Add base board and/or crown moulding (not included)
to complete your space.
Sample Finished Space With Full Panels
Installation Instructions
Full Panel 2-Pack Kit
  • Page 1 1
  • Page 2 2

SoftWall Finishing Systems SW9729667021 Installation guide

Brand
SoftWall Finishing Systems
Model
SW9729667021
Category
Knives
Type
Installation guide

SoftWall Finishing Systems SW9729667021 is a versatile acoustic wall panel system that can be used to create a variety of different looks and configurations. The system includes a variety of components, including full panels, split panels, and corner rails, that can be combined to create custom wall sections. The panels are made of fiberglass and are covered in a choice of fabric, making them both durable and attractive.

SoftWall Finishing Systems SW9729667021 is easy to install and can be used in a variety of applications, including offices, schools, hospitals, and homes. The system can be used to create sound-absorbing walls, decorative walls, or even privacy screens.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents