Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2021 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-3482 REV C ■ 101221
Dia®
Tools Required for Installation
Plumber Tape
Model Numbers Specification
10262SH5
5 Mode Showerhead
Installation Guide
☐10262SH5 5 Mode Showerhead
Dimensions
Note: Dimensions subject to change without notice.
Optional Modifications
Note: Append appropriate -sux to model number.
☐-MB Matte black finish
☐-1.5 1.5 gpm (5.7 L/min) flow rate
☐-2.0 2.0 gpm (7.6 L/min) flow rate
• 5 mode showerhead
• Female ball joint adapter
• 4-3/4" diameter
• Easy to clean rubber nozzles
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
-WaterSense 2.0 gpm (7.6 L/min)
Certied by
CSA Group
Installation
WARNING: This product can expose you to chemicals including
lead, which is known to the state of California to cause cancer, birth
defects, or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
1/2-14 NPT
4 3/4" 120.00mm
3/4" 19.63mm
2 13/16"71.78mm
-
1
Symmons 10262SH515 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons 6605-1.5-STN Installation guide
-
-
-
Symmons Industries 672SH-STN-1.5 Installation guide
-
Symmons 352SH-BBZ-1.5 Installation guide
-
-
-
Symmons 362SH-MB-1.5 Installation guide
-
-