Magnescale MG80-EI is an interface module for measuring systems that can acquire multi-axis measurement data. It is connected with a computer or PLC via EtherNet/IP and is used in combination with counter modules.
MG80-EI uses common data format with existing MG70-EI products, so MG70-EI users can continue to use the programming environment.
Up to 16 counter modules can be connected to each interface module. Always connect the supplied termination module in the endmost position of the composition units.
The IP address can be set using the rotary switch on the front panel. The IP address can be set from 1 to 255 in the whole system, and up to 255 units (4,080 axes) can be connected.
Magnescale MG80-EI is an interface module for measuring systems that can acquire multi-axis measurement data. It is connected with a computer or PLC via EtherNet/IP and is used in combination with counter modules.
MG80-EI uses common data format with existing MG70-EI products, so MG70-EI users can continue to use the programming environment.
Up to 16 counter modules can be connected to each interface module. Always connect the supplied termination module in the endmost position of the composition units.
The IP address can be set using the rotary switch on the front panel. The IP address can be set from 1 to 255 in the whole system, and up to 255 units (4,080 axes) can be connected.
Magnescale MG80-EI is an interface module for measuring systems that can acquire multi-axis measurement data. It is connected with a computer or PLC via EtherNet/IP and is used in combination with counter modules.
MG80-EI uses common data format with existing MG70-EI products, so MG70-EI users can continue to use the programming environment.
Up to 16 counter modules can be connected to each interface module. Always connect the supplied termination module in the endmost position of the composition units.
The IP address can be set using the rotary switch on the front panel. The IP address can be set from 1 to 255 in the whole system, and up to 255 units (4,080 axes) can be connected.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI