2. ROOMS TO GO
  3. 23131535

ROOMS TO GO 23131535 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the 778-04 End Table. This document provides a detailed breakdown of the included components, step-by-step guidance for assembling the table using bolts and an Allen key, and instructions on how to adjust the pre-installed levelers. I'm here to assist with any questions you may have regarding this product or its assembly.
  • What is included in the box?
    How do I attach the Support Rod to Top Panel?
    How do I level the End Table?
ASSEMBLY INSTRUCTION
778-04 END TABLE
1 PC
Bolt
8 PCS
1/4 "*5/8"
4 PCS
1 PC 4 PCS
1
This page lists all the contents included in
the box. Please take the time to identify
the hardware as well as the individual
components to this product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage.
Top Panel Bottom Frame Support Rod
Bolt
1/4 "*1-1/4"
Allen Key
M4
Flat Washer
1/4 "
4 PCS
1 PC
Attach Support Rod (C) to Top Panel (A) using Bolt (D) with Allen Key (G).
Attach Bottom Frame (B) to Support Rod (C) using, Bolt (E), Flat Washer (F) with Allen
Key (G).
D
G
G
E
F
Adjust Pre-installed Levelers
height to achieve balance.
Adjust the Pre-installed Levelers at the Bottom Frame (B) until the End Table is level
with the ground.
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
Cleaning & Care
A
C
A
C
B
A
C
B
2
/