ASSEMBLY INSTRUCTION
1 PC
Bolt
8 PCS
1/4 "*5/8"
4 PCS
1 PC 4 PCS
This page lists all the contents included in
the box. Please take the time to identify
the hardware as well as the individual
components to this product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage.
Bottom Frame
Bolt
1/4 "*1-1/4"
Allen Key
M4
Flat Washer
1/4 "
4 PCS
1 PC
778-30 COFFEE TABLE
Top Panel Support Rod
1
D
G
G
E
F
Adjust Pre-installed Levelers
height to achieve balance.
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
Cleaning & Care
A
A
C
C
B
Attach Support Rod (C) to Top Panel (A) using Bolt (D) with Allen Key (G).
Attach Bottom Frame (B) to Support Rod (C) using, Bolt (E), Flat Washer (F) with Allen
Key (G).
Adjust the Pre-installed Levelers at the Bottom Frame (B) until the End Table is level
with the ground.
B
C
A
2
-
1
-
2
ROOMS TO GO 22131534 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Spirit XG400 e-Glide Trainer Owner's manual
-
Fitness Reality 2317 Owner's manual
-
Exerpeutic 1301 Owner's manual
-
-
-
-
-
-
-