Pulse MICROMIX4 User manual

MICROMIX4
Pulse
Brand
Pulse
Model
MICROMIX4
Category
Microphones
Type
User manual

Pulse MICROMIX4 is a compact mono microphone mixer designed to expand the capabilities of mixers and amplifiers with limited inputs. Perfect for use with PA mixer amplifiers, DVD karaoke systems, and DJ mixers, it features four mono microphone inputs, individual channel level controls, and a master volume control with peak LED indicator. The MICROMIX4 operates on a 9V PP3 battery or external 9Vdc source (PSU supplied) and includes a line level output for easy connection to external devices.

Pulse MICROMIX4 is a compact mono microphone mixer designed to expand the capabilities of mixers and amplifiers with limited inputs. Perfect for use with PA mixer amplifiers, DVD karaoke systems, and DJ mixers, it features four mono microphone inputs, individual channel level controls, and a master volume control with peak LED indicator. The MICROMIX4 operates on a 9V PP3 battery or external 9Vdc source (PSU supplied) and includes a line level output for easy connection to external devices.

1
4 Channel Mono Microphone Mixer
Model: MICROMIX4
www.pulse-audio.co.uk
2
Safety Information
The lightning bolt within a
triangle is intended to alert
the user to the presence of
dangerous voltage levels
within the product’s
enclosure.
This voltage may be of
sufficient magnitude to
constitute an electric shock
risk.
To reduce the risk of electric
shock, do not remove cover of
this device. There are no user
serviceable parts inside. Refer
servicing only to qualified
service personnel.
The exclamation point within a
triangle is intended to alert the
user to important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Safety Precautions
• Read and retain these instructions
• Follow all instructions and heed warnings
• Do not use this device near water
• If the surface becomes dirty, clean only with dry cloth, do not use solvents or thinners
• Install in accordance with the manufacturer’s instructions
• Do not install near heat sources such as radiators, heat registers, stoves, or other devices that
produce heat
• Only use accessories specified by the manufacturer
• Refer all servicing to qualified personnel
Pulse MICROMIX4 – Compact Mono Microphone Mixer
The compact MICROMIX4 from Pulse is ideal for adding extra microphone channels to mixers and amplifiers with limited
inputs. Suitable for use with compact PA mixer amplifiers, DVD karaoke systems and DJ mixers.
Features
• Four mono microphone inputs via unbalanced 6.35mm (¼”) jack sockets
• Master volume control with peak LED indicator
• Individual channel level controls
• Line level output (6.35mm Jack plug-plug lead supplied)
• Operates from 9V PP3 battery (not supplied) or external 9Vdc source (PSU supplied)
• Rugged, metal casing
• Input: 5mV/10kΩ
• Output: 100mV/2kΩ
• Frequency response: 20Hz~20kHz
• THD: <0.5%
• Signal to Noise ratio: 55dB
• Power input: 9Vdc
• Dimensions (WxHxD): 148x51x85mm
• Weight: 396g
3
Operation:
1
5
4
3
2
6
7
4
1) Microphone Input Level Control
Each microphone input has a corresponding level control. Adjustment in the clockwise direction will increase the level
of the microphone within the “main” or “master” mix.
2) Peak Indicator LED
To avoid distortion or overloading of the internal circuits the mixer features a PEAK indicator LED. Should the LED
illuminate either reduce the level of the MASTER volume or reduce the level of the microphone inputs.
3) Master Volume Control & On/Off Switch
The MASTER volume also features the On/Off control of the mixer. To switch the mixer on turn the MASTER in a
clockwise direction past the “click point”. To switch off turn the MASTER in an anti-clockwise direction past the “click
point”. To save power or prevent battery drain turn off the unit when not in use.
4) 9V DC Mains Input
The mixer can be powered either by a 9V PP3 battery or from an external 9V DC power source (PSU supplied). When
using a 9V DC power adaptor the PP3 battery should be removed.
5) Master Output
An unbalanced 6.35mm (¼”) mono line output suitable for connection to the AUX or LINE IN on most mixing
consoles, amplifiers and karaoke systems. TIP= positive (+ve), RING= negative (-ve) or ground.
6) Microphone Input
An unbalanced 6.35mm (¼”) mono microphone input suitable for use with most dynamic microphones.
7) Battery Compartment
Disconnect any power before opening the product. On the base of the unit the battery compartment is accessed by
removing one central Philips type screw. The battery used should be a good quality Alkaline cell (9V PP3 type). If the
mixer is not used for long periods of time the battery should be removed.
Compliance
When this product reaches the end of its life, do not dispose with household waste. See www.recycle-
more.co.uk for details of how to dispose of PULSE products in an environmentally sound fashion, or
contact PULSE directly via www.pulse-audio.co.uk
Warranty
Pulse products are warranted, by Pulse, against manufacturer defects for a period of one year from the
original date of purchase. This warranty is limited to manufacturer defects, in either materials or
workmanship. PULSE, or any other worldwide divisions of Premier Farnell PLC, is not responsible for any
consequential or inconsequential damage to any other component, structure or the cost of installation or
removal of said items. Defective items should be returned to the retailer from whom they were originally
purchased. Batteries are classed as a consumable item, as a result any battery will only carry a 90 day
warranty from date of purchase.
This warranty will not cover damage due to improper use such as (and not limited to) damaged cones,
mounting frames, voice coils or items damaged by weather including exposure to moisture.
For questions or specific information regarding warranty replacement or repair, contact:
PULSE
www.pulse-audio.co.uk
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pulse MICROMIX4 User manual

MICROMIX4
Pulse
Brand
Pulse
Model
MICROMIX4
Category
Microphones
Type
User manual

Pulse MICROMIX4 is a compact mono microphone mixer designed to expand the capabilities of mixers and amplifiers with limited inputs. Perfect for use with PA mixer amplifiers, DVD karaoke systems, and DJ mixers, it features four mono microphone inputs, individual channel level controls, and a master volume control with peak LED indicator. The MICROMIX4 operates on a 9V PP3 battery or external 9Vdc source (PSU supplied) and includes a line level output for easy connection to external devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents