TOA WM-3210 Quick start guide

Brand: TOA

Model: WM-3210

Category: Musical Equipment

Type: Quick start guide

Delivering a new standard for high performance in

complete wireless microphone systems, TOA provides

a full range of wireless microphones optimized for

general as well as specific applications, including

tuner units and ancillary equipment. Offering more

versatility than ever, increased coverage area and

cost-effectiveness, TOA wireless microphone systems

also demonstrate complete reliability for high use,

long-term operation in demanding environments.

This opens up wireless microphone applications beyond

the conventional, allowing use in applications such as

aerobics classes and various demonstrations where the

user is in constant motion.

Improved performance and mobility for

more applications.

WM-4310H

UHF Headset Wireless Microphone

WM-4200

UHF Handheld (Vocal) Wireless Microphone

WM-4210

UHF Handheld (Vocal) Wireless Microphone

WM-4220

UHF Handheld (Speech) Wireless Microphone

WM-4300

UHF Lavaliere Wireless Microphone

WM-4310

UHF Lavaliere Wireless Microphone

• Operating range : 3m-150m

• Dynamic cardioid microphone element

designed for vocal use

•Four 16-channel banks of circuit frequencies

• Input sensitivity control included

• Maximum input level : 145 dB SPL

• Dynamic range: over 110 dB

• Rubber coating minimizes handling noise.

• ON/OFF switch designed to prevent accidental

activation

• LED low battery indicator

• Operating range: 3m-120m

• Dynamic cardioid microphone element

designed for vocal use

• 16 selectable channel frequencies

• Maximum input level:130 dB SPL

• Dynamic range: over 110dB

• On/Off switch also keeps mic from rolling

when put down

• Flashing LED low battery indicator

• Operating range: 3m-120m

• Electret condenser cardioid microphone

element for speech use

• 16 selectable channel frequencies.

• Maximum input level: 125 dB SPL

• Dynamic range: over100dB

• On/Off switch also keeps mic from rolling

when putdown

• Flashing LED low battery indicator

• Operating range: 3m-150m

• Electret condenser cardioid microphone

element for speech use

•Four 16-channel banks of circuit frequencies

• Input sensitivity control included

• Maximum input level: 120 dB SPL

• Built-in circuitry designed to minimize the

influence from ambient noise

• Belt clip rotatable 360 degrees

• Highly reliable TA-4 mini-cannon microphone

plug

• Flashing LED low battery indicator

• Operating range: 3m-120m

• Electret condenser cardioid microphone

element for speech use

• 16 selectable channel frequencies

• Input sensitivity control included

• Maximum input level: 120 dB SPL

• Built-in circuitry designed to minimize the

influence from ambient noise

• Belt clip rotatable 360 degrees

• Locking mini-plug microphone jack

• Flashing LED low battery indicator

• Operating range : 3m-120m

• Electret condenser cardioid microphone

element for speech use

• 16 selectable channel frequencies

• Input sensitivity control included

• Maximum input level : 120 dB SPL

• Built-in circuitry designed to minimize the

influence from ambient noise

• Belt clip rotatable 360 degrees

• Lock-equipped mini-plug microphone jack

• Flashing LED low battery indicator

• Headset provides secure and comfortable fit

on head

Wireless Microphone Units

TOA has improved on Phase Locked Loop (PLL)

synthesis technology for use in its wireless

microphone systems, virtually eliminating any

frequency oscillation that can sometimes occur with

variations in ambient temperatures.

TOA

s new line of wireless microphones comprises

handheld models WM-4200, WM-4210, and

WM-4220, lavaliere models WM-4300 and

WM-4310, the WM-4310H headset model and the

WM-4310A with a dedicated headset for aerobics

and other active applications.

•Up to 16 microphones can be used in the same area without

any problems.

•A wide operating range allows microphones to be used up to

a maximum of 150 meters distance (WM-4200 and WM-4300)

from the tuner units.

•Extended battery life: provides over10 hours of continuous

use at average temperatures

• Adjustable input sensitivity for precise control of input

prevents distortion and overloading.

A full range of components

for configuring an ideal wire

• 16 selectable channel frequencies

•Auto mixing input function

•Tone squelch function

•TOA Space Diversity technology*

• Rod antenna x 2

• Squelch function (Carrier, Noise)

• Balanced output (XLR connector) and phone jack output

• Microphone sensitivity adjustment function

WM-4310A

UHF Headset (Aerobics) Wireless Microphone

WT-4800

UHF Wireless Tuner

•Operating range: 3m-120m.

•Electret condenser cardioid microphone

element for speech use.

•16 selectable channel frequencies.

•Input sensitivity control included.

•Maximum input level: 120 dB SPL.

•Built-in circuitry designed to minimize the

influence from ambient noise.

•Belt clip rotatable 360 degrees.

•Lock-equipped mini-plug microphone jack.

•Flashing LED low battery indicator.

•Headset securely and comfortable fits on

head.

•Sweat-resistant headset microphone.

•Securely fitting belt with pouch.

Tuner Units

WT-4810

UHF Wireless Portable Tuner

All TOA wireless microphone tuners utilize the

Phased Lock Loop (PLL) synthesis method to

deliver exceptional performance along with

stability and reliability, minimizing oscillation

frequency variations caused by ambient

temperature variations. In addition, overall

performance is enhanced by the TOA Space

Diversity circuitry and antenna diversity technology

that is also incorporated in these units.

The tuner units comprise the WT-4800 and

WT-4810 1-station units, models, the WT-4820

2-station unit and the WTU-4800 tuner unit for

mounting on the WT-4820 unit. The WT-4800

provides 64 selectable frequencies, the WT-4810

and WT-4820 16 selectable frequencies.

•TOA's proprietary Space Diversity technology and

algorithm are incorporated in each tuner to provide constant

area coverage. Total performance and reliability are also

enhanced through TOA's simpler and more effective circuitry

compared to conventional diversity tuners.

•Four 16-channel banks of circuit frequencies

• Antenna cascade output function (parallel connection possible for

linking three WT-4800 units)

•Auto mixing input function

•Tone squelch function

•TOA Space Diversity technology*

• Usable frequencies scanning channel check function

• 1/4 wave antenna x 2

• Compact 19" rack-mount design

• Microphone sensitivity adjustment function

• Compander circuit for minimizing ambient noise

less system.

WT-4820

2-Channel UHF Wireless Tuner

WTU-4800

UHF Tuner Unit

MB-WT3

Rack Mount Bracket Kit

• 16 selectable channel frequencies

• Antenna cascade output function (parallel connection possible for

linking two WT-4820 units)

•Auto mixing input function

•Tuner unit connections

accessible from the front

(even if rack mounted,

the front panel is easily

opened)

•TOA Space Diversity

technology*

• Mix output/tuner 1 output (selectable), tuner 2 has 2 outputs

• Rod antenna x 2

• Compact 19" rack-mount design

• External antenna inputs

Antenna Distributor

Antenna

Rack Mount Bracket Kits

MB-WT4

Rack Mount Bracket Kit

YW-4500

UHF Wireless Antenna

• UHF wireless dipole indoor antenna

•Wall mounted

•Power supplied by tuner unit (WT-4820,WT-4800, WD-4800)

through coaxial cable

• Built-in RF signal booster

• Attenuation switch helps minimize noise and any interference

WD-4800

Antenna Distributor

•2 antenna inputs and 4 distributed outputs

•2 inputs per antenna which are mixed for output

(when 2 antennas are set up in a large room)

• Supplies power to the antenna

•Tone squelch function (WT-4800 and WT-4810) is useful

when the incoming signal strength goes below a settable

signal strength level as the output is automatically muted to

prevent annoying noise.

• Microphone sensitivity control (WT-4800 and WT-4810)

allows adjusting the input level to suit the user's voice level

and to prevent overloading or distortion.

•Antenna cascade output function (WT-4800 and WT-4820)

allows connecting an auxiliary tuner unit. This enables system

expansion without having to add additional antenna mixers/

distributors. Using a parallel connection, up to three WT-4800

units can be linked with a total of 3 mics being used (allow

linking two WT-4820 units 4 mics to be used). If a problem

should occur, the WD-4800 can be used to distribute the

antenna output.

• Auto mixing input function makes it possible to connect one

unit's AF input to the AF output of another unit so that the

unit's demodulated voice signal and the voice signal received

from the other unit can be mixed for output.

•Usable frequencies scanning channel check function

(WT-4800) is incorporated for locating preset frequencies that

are free.This built-in scanner prevents interference and

problems that may be caused with incorrect settings.

•Two type brackets

•For rack-mounting one WT-4800/WT-4820 unit

•Bracket (x2) with connector

•For rack-mounting two WT-4800/WT4820 unis

MB-15B

Rack Mount Bracket Kit

•For rack-mounting one WD-4800 unit

• PLL synthesis double superheterodyne diversity tuner module

• Designed for use with UHF wireless equipment

• Squelch function mutes output to reduce noise

• Includes compander noise reduction to cut ambient RF noise

• Compact dimensions

* Patents pending for TOA Space Diversity Technology.

System Connections

Here are some examples of commonly used connections for various applications.

Accessory

antenna

Accessory

antenna

Wall-mounted

wireless antenna

YW-4500 (optional)

Wall-mounted

wireless antenna

YW-4500 (optional)

AC-DC adapter

1st WT-4820 unit

2nd WT-4820 unit

Power Amplifiers

Speaker

Microphones

Tuners

AC-DC adapter

Accessory

antenna

Accessory

antenna

Wall-mounted

wireless antenna

YW-4500 (optional)

Wall-mounted

wireless antenna

YW-4500 (optional)

AC-DC adapter

WT-4800

Power Amplifiers

Speaker

Example 1

Example 3

Accessory

antenna

Accessory

antenna

Wall-mounted

wireless antenna

YW-4500 (optional)

Wall-mounted

wireless antenna

YW-4500 (optional)

AC-DC adapter

1st WT-4800 unit

2nd WT-4800 unit

Power Amplifiers

Speaker

Microphones

AC-DC adapter

Example 2

Specifications are subject to change without notice.

Printed in Japan (0310) 833-61-767-1D u

TOA Corporation

www.toa.jp

Specifications

Power Requirement

Power Consumption

Receiving Frequency

Channel Selectable

Receiving System

Diversity System

Mixing Output

Mixing Input

Antenna

Antenna Input

Antenna Output

Receiving Sensitivity

Squelch Sensitivity

Squelch System

Ton e Frequency

Indicator

Channel Check

Digital Controlled I/O

Audio Output

Cascade Input

S/N Ratio

Harmonic Distortion

Frequency Response

Other Function

Operating Temperature

Finish

Dimensions

Weight

Accessory

Option

Power Requirement

Current Consumption

Receiving Frequency

Dipole Ratio Relative

Gain

V. S. W. R

Output Impedance

Mounting Hole Pitch

Operating Temperature

Finish

Dimensions

Weight

Accessory

7–12 V DC

(supplied from amplifier or tuner)

Under 24 mA

680–880 MHz, UHF

More than 8 dB (780 MHz)

Less than 3.0

75 Ω

83.5 mm (dimensions for wiring box)

–10°C to +50°C

AES resin, off-white

105

(

)

× 140

(

)

× 126

(

)

270 g

M3.5 screw for wiring box × 2,

Tapping screw (M4) for wooden wall x 2,

RG-6/U or RG-11/U sleeve x 1

Power Requirement

Power Consumption

Frequency Range

Antenna Input

Antenna Output

DC Power Supply

Indicator

Operating Temperature

Finish

Dimensions

Weight

Accessory

Option

AC mains

25W

VHF

UHF

2 input (front × 1, rear × 1), 75 Ω,

BNC (phantom powering for antenna)

4 output, 75 Ω, BNC

4 output, (each output: 13V DC/250mA)

Power

–10°C to +50°C

Steel, coating

420

(

)

× 44

(

)

× 305.5

(

)

3.5 kg

DC cable × 4

Rack mounting bracket: MB-15B

WM-4220

UHF Hand-held (Speech)

Wireless Microphone

Microphone Element

Emission

Frequency Range

Channel Selectable

RF Carrier Power

Ton e Fr equency

Modulation System

Maximum Input Level

Maximum Deviation

Battery

Battery Life

Indicator

Antenna

Operating Temperature

Finish

Dimensions

Weight

Accessory

Model No.

WT-4800

UHF Wireless Tuner

WT-4810

UHF Wireless Potable Tuner

WT-4820

2-Channel UHF Wireless Tuner

WD-4800

Power/Antenna Distributor

Model No.

WM-4200

UHF Hand-held (Vocal)

Wireless Microphone

WM-4210

UHF Hand-held (Vocal)

Wireless Microphone

YW-4500

UHF Wireless Antenna

Model No.

Frequency range may vary by area. (between 690 to 865 MHz)

Frequency range may vary by area. (between 690 to 830 MHz)

0dB = 1 V

*Specifications are subject to change without notice.

Power Requirement

Current Consumption

Receiving Frequency

Receiving System

Receiving Sensitivity

Antenna Input Impedance

Diversity System

Channel Selectable

Squelch System

Squelch Sensitivity

Output

Harmonic Distortion

Frequency Response

Operating Temperature

Finish

Dimensions

Weight

Accessory

7–12 V DC

100 mA

690–830 MHz*

, UHF

Double super-heterodyne

Better than 80 dB, S/N ratio

(20 dBµV input, 40 kHz deviation)

75 Ω

Space diversity

16 CH

Noise SQ

18 dBµV

0 dB*

(maximum deviation, 2.2 kΩ load)

Less than 1%

100 –12,000 Hz,±3 dB

–10°C to +50°C

Steel

60(W) × 25(H) × 139(D)mm

130 g

Driver for channel changing × 1

WTU-4800

UHF Wireless Tuner Unit

Model No.

AC mains 12 – 18 V DC

250 mA (12 V DC) 130 mA (12 V DC)

250 mA (12 V DC when operating

with two tuner modules)

690–830 MHz, UHF*

690–870 MHz, UHF

64 Selectable frequencies

16CH

Double Super-heterodyne —

Space diversity —

MIC: –60 dB*

/LINE: –20 dB*

, 600Ω —

–20 dB*

, 10 kΩ

–20 dB*

, 10 kΩ, unbalanced,

phone jack

—Rod antenna —

75 Ω, BNC (phantom powering 75 Ω, BNC (phantom powering

for antenna) 9 V DC, — for antenna) 9 V DC,

30 mA (max.) 30 mA (max.)

75Ω, BNC (Gain 0dB) — 75Ω, BNC (Gain 0dB)

over 80 dB, S/N ratio (20 dBµV input, 40 kHz deviation) —

18–40 dBµV variable —

Using together of noise SQ, Using together of noise SQ and —

carrier SQ and tone SQ carrier SQ

32.768 kHz — —

Audio (11 step), RF (11 step),

—

ANT A/B, Audio (peak), Power

ANT A/B, Audio (peak)

Usable frequencies scanning — —

Usable frequencies reading,

——

frequencies input

Phone jack (unbalanced), XLR-3-31 type connector (balanced)

Mixing/Channel 1 (selectable):

–20 dB*

(+6 dB*

Max.), 600Ω,

unbalanced, phone jack

–14 dB*

(+12 dB*

Max.), 600Ω,

balanced, XLR-3-31 type connecter

Channel 2: –20 dB*

(+6 dB*

Max.),

unbalanced, 600Ω, phone jack

Phone jack (unbalanced) —

Over 110 dB Over 104 dB Over 102 dB

(A-weight, balanced output) (A-weight, balanced output) (A-weight, balanced output)

Under 1%

100 – 12,000 Hz, ±3 dB 50 – 18,000 Hz, ±3 dB

Frequency select by PC, channel —

–10°C to +50°C

Resin, black

210(W) × 44.2(H) × 181(D) mm 240(W) × 35(H) × 110(D) mm 210(W) × 44(H) × 181(D) mm

700 g 390 g 770 g (without tuner module)

AC-DC adapter × 1 AC-DC adapter × 1,

Rod antenna × 2, Rubber foot × 4

Driver for channel changing × 1

Mounting bracket kit: Mounting bracket kit:

MB-WT3 (for rack mounting — MB-WT3 (for rack mounting

one WT-4800 unit) one WT-4820 unit)

MB-WT4 (for rack mounting MB-WT4 (for rack mounting

two WT-4800 units) two WT-4820 units)

Dynamic microphone unit: Cardioid Electlet condenser unit:

Cardioid

F3E

690–865 MHz, UHF*

64 Selectable frequencies

16 CH

(international may vary)

Less than 50 mW

32.768 kHz

PLL synthesizer

145 dB SPL 130 dB SPL 125 dB SPL

±40 kHz

6LR61 (9 V x 1)

10 hours (alkaline)

Power/Battery indicator (common use)

1/4 λ herical antenna Internal antenna

–10°C to +50°C

Resin, coating (change other's)

ø52.2× 279.4 mm ø50 × 235.2 mm ø45× 235.2 mm

300 g (with battery) 250 g (with battery)

Stand adapter

× 1

, Screw driver

× 1

, Storage case

× 1

Emission

Frequency Range

Channel Selectable

RF Carrier Power

Tone Frequency

Modulation System

Maximum Input Level

Battery

Battery Life

Indicator

Antenna

Operating Temperature

Finish

Dimensions

Weight

Accessory

Microphone unit

Microphone

Power Requirement

Connector

WM-4300

UHF Lavalier

Wireless Microphone

WM-4310

UHF Lavalier

Wireless Microphone

WM-4310H

UHF Headset

Wireless Microphone

WM-4310A

UHF Headset (Aerobics)

Wireless Microphone

F3E

690–865 MHz, UHF*

64 Selectable

16 CH

frequencies

(international may vary)

Less than 50 mW

32.768 kHz

PLL synthesizer

120 dB SPL

6LR61 (9 V × 1)

10 hours (alkaline)

Power/Battery indicator (common use)

1/4 λ herical antenna

–10°C to +50°C

Resin, coating

62(W) × 142(H) × 32(D) mm

135 g (with battery)

Screw driver × 1, Storage case × 1 Screw driver × 1

Waist pouch × 1, Screw driver × 1

Electret condenser microphone, cardioid

DC (supplied from lavalier pack )

TA-4 (XLR-type) ø3.5 plug (EIAJ RC701)

Transmitter unit

Model No.

TOA WM-3210 Quick start guide

Brand: TOA

Model: WM-3210

Category: Musical Equipment

Type: Quick start guide

Download PDF

report

TOA WM-3210 Quick start guide

TOA WM-3210 Quick start guide

Related papers

Other documents