Juniper LN1000 User manual

LN1000 Mobile Secure Router

Modified: 2015-07-02

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United

States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other

trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

LN1000 Mobile Secure Router

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the

year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks

software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at

http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of

that EULA.

ii

Table of Contents

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Part 1 Overview

Chapter 1 LN1000 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LN1000 Mobile Secure Router Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LN1000 Mobile Secure Router Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

LN1000 Mobile Secure Router Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Router Backplane Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

IPMI Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Router Console Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Tamper-Evident Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 2 LN1000 Rear Transition Module Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LN1000 Rear Transition Module Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LN1000 Rear Transition Module Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LN1000 Rear Transition Module Backplane Connector . . . . . . . . . . . . . . . . . . 9

LN1000 Rear Transition Module Console Ports . . . . . . . . . . . . . . . . . . . . . . . . 10

IPMI Shelf Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

LN1000 Rear Transition Module Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . 11

LN1000 Rear Transition Module Switch Settings . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 3 LN1000 Router Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

LN1000 Mobile Secure Router Physical Specifications . . . . . . . . . . . . . . . . . . . . . . 13

LN1000 Router Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Part 2 Safety

Chapter 4 General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Safety Requirements, Warnings, and Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

iii

Part 3 Installation

Chapter 5 Unpacking and Inspecting the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Unpacking the LN1000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Unpacking the LN1000 Rear Transition Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Inspecting the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

If You Detect or Suspect Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 6 Installing the LN1000 Mobile Secure Router . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Before You Install the LN1000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing the LN1000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Removing the LN1000 Mobile Secure Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Powering On the LN1000 Mobile Secure Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 7 Installing the LN1000 Rear Transition Module . . . . . . . . . . . . . . . . . . . . . . . . 27

Installing the LN1000 Rear Transition Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Installing an SFP Transceiver in an LN1000 RTM . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Removing an SFP from an LN1000 RTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cabling the LN1000 Rear Transition Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Part 4 Troubleshooting

Chapter 8 Troubleshooting Router Boot-Up and Operation . . . . . . . . . . . . . . . . . . . . . . 35

SPOST and POST Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Accelerating the LN Series Router Boot-Up Process . . . . . . . . . . . . . . . . . . . . . . . 36

Accessing the LN Series Router BOOT> Prompt . . . . . . . . . . . . . . . . . . . . . . . 36

Disabling or Enabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Disabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Enabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Disabling or Enabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Disabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Enabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Removing Temporary IDP Package Installation Files . . . . . . . . . . . . . . . . . . . . 41

Accessing the Extended Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

LN1000 Mobile Secure Router Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

LN1000 Rear Transition Module Front Panel Status LEDs . . . . . . . . . . . . . . . . . . . 43

Chapter 9 Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Information You Might Need to Supply to JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Packing Instructions for Returning an LN1000 Router . . . . . . . . . . . . . . . . . . . . . . 46

Part 5 Index

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

iv

LN1000 Mobile Secure Router

List of Figures

Part 1 Overview

Chapter 1 LN1000 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Figure 1: LN1000 Mobile Secure Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Figure 2: LN1000 Mobile Secure Router Installed with an LN1000 Rear Transition

Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Figure 3: Tamper-Evident Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Figure 4: ESD Warning Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2 LN1000 Rear Transition Module Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 5: LN1000 Rear Transition Module — Back View . . . . . . . . . . . . . . . . . . . . . 10

Figure 6: LN1000 Rear Transition Module — Front Panel . . . . . . . . . . . . . . . . . . . . 10

Part 3 Installation

Chapter 6 Installing the LN1000 Mobile Secure Router . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 7: LN1000 Mobile Secure Router — Front Panel . . . . . . . . . . . . . . . . . . . . . 24

Chapter 7 Installing the LN1000 Rear Transition Module . . . . . . . . . . . . . . . . . . . . . . . . 27

Figure 8: Location of the Rear Transition Module in Relation to the LN1000

Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Figure 9: Small Form-Factor Pluggable (SFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 10: Small Form-Factor Pluggable (SFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

v

vi

LN1000 Mobile Secure Router

List of Tables

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Part 1 Overview

Chapter 1 LN1000 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Table 3: LN1000 Router Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 LN1000 Rear Transition Module Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Table 4: Pinouts for the RJ-45 (NPU), shMM, and IPMC Console Port

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 3 LN1000 Router Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Table 5: LN1000 Router Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Part 4 Troubleshooting

Chapter 8 Troubleshooting Router Boot-Up and Operation . . . . . . . . . . . . . . . . . . . . . . 35

Table 6: LN1000 Router LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Table 7: LN1000 Router LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

vii

viii

LN1000 Mobile Secure Router

About the Documentation

•

Documentation and Release Notes on page ix

•

Documentation Conventions on page ix

•

Documentation Feedback on page xi

•

Requesting Technical Support on page xii

Documentation and Release Notes

To obtain the most current version of all Juniper Networks

®

technical documentation,

see the product documentation page on the Juniper Networks website at

http://www.juniper.net/techpubs/.

If the information in the latest release notes differs from the information in the

documentation, follow the product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject

matter experts. These books go beyond the technical documentation to explore the

nuances of network architecture, deployment, and administration. The current list can

be viewed at http://www.juniper.net/books.

Documentation Conventions

Table 1 on page x defines notice icons used in this guide.

ix

Table 1: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware damage.Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Indicates helpful information.Tip

Alerts you to a recommended use or implementation.Best practice

Table 2 on page x defines the text and syntax conventions used in this guide.

Table 2: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type the

configure command:

user@host> configure

Represents text that you type.Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on the

terminal screen.

Fixed-width text like this

•

A policy term is a named structure

that defines match conditions and

actions.

•

Junos OS CLI User Guide

•

RFC 1997, BGP Communities Attribute

•

Introduces or emphasizes important

new terms.

•

Identifies guide names.

•

Identifies RFC and Internet draft titles.

Italic text like this

Configure the machine’s domain name:

[edit]

root@# set system domain-name

domain-name

Represents variables (options for which

you substitute a value) in commands or

configuration statements.

Italic text like this

x

LN1000 Mobile Secure Router

Table 2: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

•

To configure a stub area, include the

stub statement at the [edit protocols

ospf area area-id] hierarchy level.

•

The console port is labeled CONSOLE.

Represents names of configuration

statements, commands, files, and

directories; configuration hierarchy levels;

or labels on routing platform

components.

Text like this

stub <default-metric metric>;Encloses optional keywords or variables.< > (angle brackets)

broadcast | multicast

(string1 | string2 | string3)

Indicates a choice between the mutually

exclusive keywords or variables on either

side of the symbol. The set of choices is

often enclosed in parentheses for clarity.

| (pipe symbol)

rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the

same line as the configuration statement

to which it applies.

# (pound sign)

community name members [

community-ids ]

Encloses a variable for which you can

substitute one or more values.

[ ] (square brackets)

[edit]

routing-options {

static {

route default {

nexthop address;

retain;

}

Identifies a level in the configuration

hierarchy.

Indention and braces ( { } )

Identifies a leaf statement at a

configuration hierarchy level.

; (semicolon)

GUI Conventions

•

In the Logical Interfaces box, select

All Interfaces.

•

To cancel the configuration, click

Cancel.

Represents graphical user interface (GUI)

items you click or select.

Bold text like this

In the configuration editor hierarchy,

select Protocols>Ospf.

Separates levels in a hierarchy of menu

selections.

> (bold right angle bracket)

Documentation Feedback

We encourage you to provide feedback, comments, and suggestions so that we can

improve the documentation. You can provide feedback by using either of the following

methods:

•

Online feedback rating system—On any page at the Juniper Networks Technical

Documentation site at http://www.juniper.net/techpubs/index.html, simply click the

stars to rate the content, and use the pop-up form to provide us with information about

your experience. Alternately, you can use the online feedback form at

https://www.juniper.net/cgi-bin/docbugreport/.

xi

About the Documentation

•

E-mail—Send your comments to techpubs-comments@juniper.net. Include the document

or topic name, URL or page number, and software version (if applicable).

Requesting Technical Support

Technical product support is available through the Juniper Networks Technical Assistance

Center (JTAC). If you are a customer with an active J-Care or Partner Support Service

support contract, or are covered under warranty, and need post-sales technical support,

you can access our tools and resources online or open a case with JTAC.

•

JTAC policies—For a complete understanding of our JTAC procedures and policies,

review the JTAC User Guide located at

http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.

•

Product warranties—For product warranty information, visit

http://www.juniper.net/support/warranty/.

•

JTAC hours of operation—The JTAC centers have resources available 24 hours a day,

7 days a week, 365 days a year.

Self-Help Online Tools and Resources

For quick and easy problem resolution, Juniper Networks has designed an online

self-service portal called the Customer Support Center (CSC) that provides you with the

following features:

•

Find CSC offerings: http://www.juniper.net/customers/support/

•

Search for known bugs: http://www2.juniper.net/kb/

•

Find product documentation: http://www.juniper.net/techpubs/

•

Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/

•

Download the latest versions of software and review release notes:

http://www.juniper.net/customers/csc/software/

•

Search technical bulletins for relevant hardware and software notifications:

http://kb.juniper.net/InfoCenter/

•

Join and participate in the Juniper Networks Community Forum:

http://www.juniper.net/company/communities/

•

Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/

To verify service entitlement by product serial number, use our Serial Number Entitlement

(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/

Opening a Case with JTAC

You can open a case with JTAC on the Web or by telephone.

•

Use the Case Management tool in the CSC at http://www.juniper.net/cm/.

•

Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

xii

LN1000 Mobile Secure Router

For international or direct-dial options in countries without toll-free numbers, see

http://www.juniper.net/support/requesting-support.html.

xiii

About the Documentation

xiv

LN1000 Mobile Secure Router

PART 1

Overview

•

LN1000 Router Overview on page 3

•

LN1000 Rear Transition Module Overview on page 9

•

LN1000 Router Specifications on page 13

1

2

LN1000 Mobile Secure Router

CHAPTER 1

LN1000 Router Overview

•

LN1000 Mobile Secure Router Description on page 3

•

LN1000 Mobile Secure Router Models on page 4

•

LN1000 Mobile Secure Router Features on page 5

LN1000 Mobile Secure Router Description

The LN1000 Mobile Secure Router is an embedded router that operates in both wire-line

and wireless environments with communication nodes that are either mobile or stationary.

The router provides reliable and secure data, voice, and video services. The LN1000

processes WAN and LAN routing functions. The router offers multiple DiffServ classes

and can interleave lower priority real-time data (voice traffic) with higher priority

non-real-time data. It is developed on 3U compact node slot interface (VITA) architecture

as defined in the VITA 46.0 IEEE 1101.2 specifications and runs Junos OS for routing,

forwarding, and security.

The LN1000 Mobile Secure Router can be used effectively in the following environments:

•

Defense communities

•

Public sector safety organizations, such as first responders

Figure 1: LN1000 Mobile Secure Router

Status LED

Router

backplane

connector

g017374

Protective plate over

RJ-45 console port

Ejector latch

3

You can install the LN1000 router in a standard VITA 46.0-compliant chassis. Optionally,

you can install it in a VITA 46.0–compliant chassis with a midplane and an LN1000 rear

transition module.

Figure 2: LN1000 Mobile Secure Router Installed with an LN1000 Rear

Transition Module

Chassis midplane

LN1000-V

Rear Transition Module

LN1000-V Router

g017378

LN1000 Mobile Secure Router Models on page 4•

• LN1000 Mobile Secure Router Features on page 5

• Installing the LN1000 Router on page 24

• LN1000 Rear Transition Module Description on page 9

LN1000 Mobile Secure Router Models

The LN1000 routers are available in different models.

Table 3 on page 4 list the various LN1000 router models available and provide a brief

description of each base unit.

Table 3: LN1000 Router Models

DescriptionModel

Vita ECC3 compliant; -58° F to 212° F (-50° C to +100° C)LN1000-V

Vita ECC2 compliant; -40° F to 185° F (-40° C to +85° C)LN1000-CC

LN1000 Mobile Secure Router Description on page 3•

4

LN1000 Mobile Secure Router

LN1000 Mobile Secure Router Features

The LN1000 Mobile Secure Router provides the following features:

•

Router Backplane Connector on page 5

•

Ethernet Ports on page 5

•

IPMI Interface on page 5

•

Router Console Port on page 5

•

Tamper-Evident Seals on page 6

Router Backplane Connector

An external interface, located on the back of the LN1000 router, connects the router to

the VITA 46.0–compliant chassis. The router’s P0, P1, and P2 connectors plugging into

the backplane are VITA 46.0–compatible for a 3U peripheral slot with specific key

definitions. The P0 and P2 connectors are keyed per the VITA 46.12 specification. Power

to the LN1000 router is provided through the P0 connector.

Ethernet Ports

The LN1000 router supports up to eight ports of gigabit Ethernet traffic with up to 1024

logical interfaces. The router supports most Layer 2 and Layer 3 protocols, route

redistribution, tunneling, multicast, routine quality of service (QoS), and security.

The eight gigabit Ethernet ports on the LN1000 router are 1000Base-X interfaces with

autonegotiation on by default. The Ethernet ports on the router interface with the chassis

in which it is installed or with the LN1000 rear transition module, if installed in a chassis.

IPMI Interface

The LN1000 router supports the Intelligent Platform Management Interface (IPMI) in

accordance with the VITA 46.0 specification. The IPMI controller on the LN1000 router

is a secondary controller while the IPMI Shelf Manager operates as the primary controller.

The IPMI Shelf Manager is not supplied by default; it is available as an option.

Router Console Port

The router’s RS-232 console port has a baud rate of 9600 8N1 and is located on the left

side of the LN1000 router’s front panel. The console port is used primarily for depot repair.

It is covered by a protective aluminum plate that prevents access to the port. When the

LN1000 router is operational and installed in a chassis, even though you can remove the

protective aluminum plate to access the console port on the router, typically you access

the console port using one of the following methods:

•

On the chassis backplane when the router is installed in VITA 46.0-compliant chassis

•

On the front panel of the rear transition module when the router is installed in a VITA

46.0-compliant chassis with a LN1000 rear transition module

5

Chapter 1: LN1000 Router Overview

Tamper-Evident Seals

Four tamper-evident seals are affixed to the router to show evidence of tampering with

the router’s internal components. Two small silver disks, which have two small holes in

them, are located over the top-left and bottom-right screws that hold the router assembly

together. Two larger, bright silver seals span the processor backer plate and primary side

cover.

WARNING: If any of these seals are removed or peeled off the router, the

router’s internal components can be exposed to electrostatic discharge

(ESD), compromising the integrity of the router, which voids the router’s

warranty.

Figure 3: Tamper-Evident Seals

g017399

Tamper-evident seals

An ESD warning label is located on the back of the router.

6

LN1000 Mobile Secure Router

Page is loading ...

Juniper LN1000 User manual

This manual is also suitable for

Juniper LN1000 User manual

Related papers

Other documents