Kenmore 51840 User manual

Brand: Kenmore

Model: 51840

Type: User manual

operating instructions and parts list

STOCK NUMBERS

COLOR 30 IN.

Whlte 51841

Almond 51848

Stainless 51840

IMPORTANT: Read instructions

carefully for safe installation end

operation.

SAVE THIS MANUAL FOR

FUTURE REFERENCE

KENMORE RANGE HOOD

Model 233.51841590

6 i

HOW TO AVOID A COMMON RANGE-TOP GREASE FiRE

• Your range hoodprovidesa protectivebarrier betweenthe cookingsurfaceand

the cabinets.

• Keepfan, filtersand grease laden surfacesCLEANaccordingto instructions.

• Alwaysturn hopdON when cookingat high heatto keepthe cookingarea €lean

and the hood/booler.

• Use high hedtsettingsonlywhen neceseary,

• Never leave cookingsurface unattended,Boil-overcauses smokingand greasy

opillevere that mw ignite.

• AIv_ys useedequete-sized utensils.

• Ifpreparingflamingfoods,suchas CherriesJubitee,alwaystumhoodON to HIGH

to preventa high heat situationwhichcan Causedamage or fire.

HOW TO EXTINGUISH A COMMON RANGE-TOP GREASE FIRE

• Never pick up a flaming pan. If dropped,flames can spreadquickly.

• DO NOT USE WATERI A violentsteam explosionmay resufl,Wet dishclothsor

towelsare alsodangerous,

• Smother flames witha closefittinglid, cookiesheet or metal tray.

• Flaminggreasecanalso be extinguishedwithbakingsodaora mufli-purpaso dry

chemicalextinguisher.

•Tum off surface units- if you can do so withoutgettingbumed.

KEY PART

NO. NUMBER DESCRIPTION

87009O42

97009043

970O9O44

98006184

99150478

97005675

99110437

97011217

7 99020248

8 99260428

9 98005568

10 97011224

11 97007966

12 97006931

13 99420472

14 99150415

15 98005221

18 99100379

17 97005544

18 97008998

19 99360118

20 97007159

21 99260422

22 97007499

23 99260470

25 87005678

26 99150471

** 97007501

.. 99042173

** 99042168

Canopy - 30" White

Canopy - 30" Almond

Canopy - 30_ Stainless

Outlet Box Cover

8-18 x 3/8 Phillips Truss Sheet Metal Screw* (2 Required)

Bulb Holder with Wires

Ught Lens

Screw/Nut Kit (Includes 2 - #10-16 x .500 Screws and

2 - #10-16 Sheet Metal Nuts)

Fan Blade

#6-32 Locking Nuts* (2 Required)

Motor Mounting Bracket

Motor Assembly (Includes Key Nca. 7, 8 & 9)

Clean Cooking System I Filter

Aluminum Ritcr

Filter Retetner

#6B x 1/4 Hex Head Sheet Metal Screw* (2 Required)

Damper F_ap

Damper Bushing

Damper Assembly (includes Key Nos. 15 & 16)

Plastic Nameplate Assembly

Knob {2 Required)

Solid State Motor Switch

Nut, 3/8-32"

Light Switch

Nut, 15/32-32 for Light Switch*

Motor Receptacle with Wires

#10-32 x 1/2 Green Ground Screw*

Diode Assembly

Light Bulb, 75 Watt (Not Included)*

Installation Instructions

Operating Instructions and Parts List

* StandardHardware.May be pumhasedlocally.

** Not Illustrated.

'ARNING

,RESlJ_E 11tE RISK OFFIRE, ELECTRtoAL SHOCK,ORINJURYTO PERSONS,OBSERVETHE

U<mllds unit only In the mm'r_ intended by the meryJleC_rm,. If you ha',,i questS-a, monist lhe

manufacbJr_adthe addmu or telephone_ tk_d in thewarranty+

8e4_ m'_<::ingo+"_',elmlng u,nlt, swlv_ power off il ram,lee panel and lock se_k:e _ _ _

ix_w hornbeings_,_tc_ed_ Kddomaly.

Inaldldon wod_and etocttk_dwkklg mt_t bedone bya qualifiedperson(s)kl acooldancevdth811

applc_e codesand _, toctodk_ flr_mted constructioncodesandstm-Jdan;_s.

Sumdom ak b needa4 f_xproporcombusttonande_ of gamintl_ the flue (chknney)

of fL.q4buntingequIpmeqtto preventbackdraffirlg,Foltowthe heatingequipmentmanufacturer's

_d salary_andar_ such as6_osepublbhedbythe NationalF_ Protectk_Assoc_on

and the Arnedcan Society for Heal_ng,Ralrlgemliofl and Air _ing Engineers

), and thelocal codaauthodaes.

Whencut6ngo( drillingintowaltorceiling,donotdamageeleclricatwtringand otherhiddenutilitk_.

Ouctedfans mustalwmysbe venteclto theoutdoors.

TOreducethe r;akof tim, useDillymetal duclv._'k

this urdtmustbe grounded.

_E THE RiSK OF A RANGE TOP GREASE FIRE:

<eepfan, filtersand grease_ surfaces clean.

Mwaystom hood ONwhen cooldngat highheat.

,MI hlgh rangeseeingson rangeonlywhen necessar/. Heatoqstowiyon _w to medkJmseff_.

'::,_:*_'tleavlp_ u,-,adondedwhen_kl_.

J.kmtysusecool.ram and utensMsappmpdate forthe _oe end8mountof toodbeingpredated,

WARNING

ltlRE,TO REDUCETHE R_K OF tNJURY TO PERSOMSINTHE EVENT OF A RANGE TO_ GR_ REOBSERVETHE FOLLOWING:*

1. SMOTHERF1JCdESw_ a ¢_m_e.rddoglid,¢ooldasheet,or metaltroy,_en tomoltI_,_el_,_

CAREFUt.TOPREVENTBUFFS, fithel_'_.,es donotge outk_4_etely, EVAC_JATEAND CAIJ_

THE FIRE DEPARTMENT.

2, NEVER FICK UP A FLAMIN_PAN - Youmey bet_Jmed.

3. DO NOT USEWATER, indnding we_dishckxtteeor towels - sviokmtsteamexploslo_wlu_uit.

4. Use s exlk_ulsherOi_.Y il:

A.You knowyou havee Ctoss/_JBCex':lngelshe_endyou alreadyknowhowtooperateR.

S. "i_eIke is sinai andoot_l_ in thearea whereIt staded.

C. "n_etimdopertme*_isbeing_lto_

D,you canI_ght_e timw_hyou_bec_ to a_ o_l_.

"Based o_"KRchenFIreufety T_" I_,shed byNFPA.

CAUTION

I. ForgeneralventHat_ ueeoNy.Donotusetoexhausthazardousorexptoslv_rm_,dalsa_ v_.

2+To avoid motorbearing damage and noisy end_crun_dancdo Impellers. keep d=yw_ spray,

construcdondust,etc.off untt.

4, Pleese roads_'_ _ _ _ forfurther into_me_ end t_l_tmm.

)PERATING INSTRUCTIONS

;WITCHES

_e blower and the tight are €ontmlted by rotary

_ftcbes on the controf panel. The blower switch

s _ofid state speed control which turns "on" in

_eckx:kw_e diceofk)n. Tbe blower speed starts at

i_ lind dials down to obtatn efficient vapor

mtovel at the quidtost sbaed. The Ught swfich has

I_+ "rum it clockwise to the first poalhon

x normal lighting. Continue to the second posi-

on for a "night light".

:LEANING

Iwsys disconnect the electricity from the range

o_d bathm sanltdng, Kee9 your range hond dean

y mdng a miM de_ergent that is suitedte for clean-

_g painted surfaces. The power unit is designed

) he easily removed for cleaning. Be care_l

> band or damage the fins on the blade as this

,ouM put them out of balance.

Jumleum I_s m_ be washed in the _,

ut extremely caustic cleaning agents should be

_0k_ed as they will discokx the aluminum.

tenticss installations also use Clean Cooking

I Filters. Clean Cooking System Filters are

_ *md_d_e. Repface the filtors wbenever _ blue

_ bacomes _ clrty or discolered. Clean

_ookleg System I Filters will last up to tweh,e

_o_he with normal use.

_IGHT BULB REPLACEMENT

"helight bulb (not supplicd with hood) should be

"5watt maximum. The lens covering the bulb is

emoved by pressing the two extending tabs

ogetber until they release from the ret_ning clots,

TO REMOVE FAN ASSEMBLY

Be sure power Is disconnected. Remove filters.

Remo_e two screws holding motor bracket to range

hood and unplug tim assembly. Be careful not to

_dlow fan Msembly to drop when screws are

removed.

CONVERTING TO VENTLESS

1. Use a thin blade toof, such as a table knife, to

carefully pry off the cover plate located in the

center section of the control pared+Discard the

Cover.

2. Order a #50183 Venfiess Fiher Kit, which con-

talcs one Clean Cool€rag System I filter, from

any Sears retail or cataleg More. Place the

Clean Cooking System I Filter under the

aluminum fiher, with the blue side next to the

fan blede. Tum the fiite,-retainer clip so that the

high end of the clip holds beth filters in place.

3. Discard the damper/duct connecto¢ assembly

supplied with the hood. It will not be needed for

the ventless version.

FILTER REMOVAL

Filters are removed by turning the filter retaining

blip to the side and lifting the filter or filters out. In

the vented version, tom the filter retaining clip to

one side and place the aluminum filter under the

embossed retaining tabs on the beck of the fan

housing. Turn the filter clip so that the low end of

the clip holds the single filter firmly in place.

In the wntles_s version, place both the aluminum

filter and the Clean Cool_ng System I Filter under

the tabe on the back of the fan housing. Make sure

that the blue side of the Clean Cooking System

Fltta¢is next to the fan blade. Turn the filter rntalne¢

clip so that the high end of the clip holds both filters

in place. Make sure that the Clean Cook:lngSystem

I Filter is next to the fan blade and the aluminum

filte_ is facing out.

NOTE: Make sure that the arrows on the filter re-

raining clip point toward the beck and the front of

the hood.

_COVERPLATE /j

(Clip in

high

ALUMINUM

FILTER

WIRING DIAGRAM

CLEAN COOKING

SYSTEM I FILTER

SQUEEZE

MOTOR

_IE Ea LIGHTSWITCH !_r/

MNO,LEX_BLKCONTROLIBLK!INTERNAL JUMPER

r-t.,j%_ L

.---, OR

WHT

LAMp

.... _ BLK

; _ _3Nd

{ : WHT

TAPED, HOOD

LEADS WIRING ,_'

Box

Note - If any of the original wire on the hood has to be replaced, it

should be replaced by wldng having equivalent insulation and

temperature rating (105°C Thermoplastic AWM, U.L. Listed).

Kenmore 51840 User manual

Kenmore 51840 User manual

Related papers

Other documents