Mountfield EL420 Operating instructions

171505669/1

Type EL 380

EL 420

Rasaerba con operatore a piedi - MANUALE DI ISTRUZIONI

Tondeuse à conducteur marchant - MANUEL D’UTILISATION

Pedestrian controlled lawnmower - OPERATOR’S MANUAL

Handgeführter Rasenmäher - GEBRAUCHSANWEISUNG

Lopend bediende grasmaaier - GEBRUIKERSHANDLEIDING

Cortadora de pasto con conductor de pie - MANUAL DE INSTRUCCIONES

Cortador de relva com operador a pé - MANUAL DE INSTRUÇÕES

Χλοοκοπτικό µε όρθιο χειριστή - Ο∆ΗΓΙΕΣ ΧΡΗΣΠΣ

Yaya kumandalı çim biçme makinesi - KULLANIM KILAVUZU

Тревокосачка со оператор на нозе - УПАТСТВА ЗА УПОТРЕБА

Gressklipper for gående fører - INSTRUKSJONSBOK

Gräsklippare med operatör till fots - BRUKSANVISNING

Plæneklipper til gående fører - BRUGSANVISNING

Seisaaltaan ajettava ruohonleikkuri - KÄYTTÖOHJEET

Sekačka se stojící obsluhou - NÁVOD K POUŽITÍ

Kosiarka z operatorem chodzącym - INSTRUKCJE OBSŁUGI

Lábbal szabályozható fűnyíró - HASZNÁLATI UTASÍTÁS

Газонокосилка с пешеходным управлением - PУКОВОДСТВО С ИНСТРУКЦИЯМИ

Kosilica sa vozačom koji hoda - PRIRUCĽNIK ZA UPORABU

Kosilnica za stoječega delavca - PRIROČNIK ZA UPORABO

Kosilica za travu na guranje - UPUTSTVO ZA UPOTREBU

Kosačka so stojacou obsluhou - NÁVOD NA POUŽITIE

Mașină de tuns iarba cu conducător pedestru - MANUAL DE INSTRUCŢIUNI

Žoliapjovė su stovinčiu operatoriumi - INSTRUKCIJŲ VADOVAS

Stumjama zāliena pļaujmašīna - OPERATORA ROKASGRĀMAT

Kosilica sa vozačem na nogama - PRIRUČNIK SA UPUTSTVIMA

Kосачка с изправен оператор - УПЪТВАНЕ ЗА УПОТРЕБА

Seisva juhiga muruniitja - KASUTUSJUHEND

ET

BG

SR

LV

LT

RO

SK

BS

SL

HR

RU

HU

PL

CS

FI

DA

SV

NO

MK

TR

EL

PT

ES

NL

DE

EN

FR

IT

ME77

GGP ITALY SPA

Via del Lavoro, 6

I-31033 Castelfranco Veneto (TV) ITALY

Page is loading ...

I

TALIANO - Istruzioni Originali ................................................................................... 6 - 20

FRANÇAIS - Traduction de la notice originale (Istruzioni Originali) ................................ 6 - 23

ENGLISH - Translation of the original instructions (Istruzioni Originali) ......................... 7 - 26

DEUTSCH - Übersetzung der Originalbetriebsanleitung (Istruzioni Originali) ............... 7 - 29

NEDERLANDS - Vertaling van de oorspronkelijke gebruiksaanwijzing (Istruzioni Originali)

........ 8 - 32

ESPAÑOL - Traducción del Manual Original (Istruzioni Originali) .................................. 8 - 35

PORTUGUÊS - Tradução do manual original (Istruzioni Originali) ................................. 9 - 38

ΕΛΛΗΝΙΚΑ - Μετάφραση του πρωτοτύπου των οδηγιών χρήσης (Istruzioni Originali)

...... 9 - 41

TÜRKÇE - Orijinal Talimatların Tercümesi (Istruzioni Originali) .................................... 10 - 44

МАКЕДОНСКИ -Превод на оригиналните упатства (Istruzioni Originali) ............... 10 - 47

NORSK - Oversettelse av orginal bruksanvisning (Istruzioni Originali) ....................... 11 - 50

SVENSKA - Översättning av bruksanvisning i original (Istruzioni Originali) ................. 11 - 53

DANSK - Oversættelse af den originale brugsanvisning (Istruzioni Originali) .............. 12 - 56

SUOMI - Alkuperäisten ohjeiden käännös (Istruzioni Originali) ................................... 12 - 59

ČESKY - Překlad původního návodu k používání (Istruzioni Originali) ......................... 13 - 62

POLSKI - Tłumaczenie instrukcji oryginalnej (Istruzioni Originali) ................................ 13 - 65

MAGYAR - Eredeti használati utasítás fordítása (Istruzioni Originali) ........................... 14 - 68

РУССКИЙ - Перевод оригинальных инструкций (Istruzioni Originali) ..................... 14 - 71

HRVATSKI - Prijevod originalnih uputa (Istruzioni Originali) ......................................... 15 - 74

SLOVENŠČINA - Prevod izvirnih navodil (Istruzioni Originali) ..................................... 15 - 77

BOSANSKI - Prijevod originalnih uputa (Istruzioni Originali) ....................................... 16 - 80

SLOVENSKY - Preklad pôvodného návodu na použitie (Istruzioni Originali) ............... 16 - 83

ROMÂN - Traducerea manualului fabricantului (Istruzioni Originali) ............................ 17 - 86

LIETUVIŠKAI - Originalių instrukcijų vertimas (Istruzioni Originali) .............................. 17 - 89

LATVIEŠU - Instrukciju tulkojums no oriģinālvalodas (Istruzioni Originali) .................. 18 - 92

SRPSKI - Prevod originalnih uputstva (Istruzioni Originali) .......................................... 18 - 95

БЪЛГАРСКИ - Инструкция за експлоатация (Istruzioni Originali) ........................... 19 - 98

EESTI - Algupärase kasutusjuhendi tõlge (Istruzioni Originali) .................................. 19 - 101

ET

BG

SR

LV

LT

RO

SK

BS

SL

HR

RU

HU

PL

CS

FI

DA

SV

NO

MK

TR

EL

PT

ES

NL

DE

EN

FR

IT

Page is loading ...

expliquée ci-après. Nous vous recommandons également de lire attentivement les

c

onsignes de sécurité données au chapitre prévu du présent manuel.

R

emplacer les étiquettes abîmées ou illisibles.

61. Attention: Lire le manuel d’instructions avant d’utiliser la machine.

62. Risque d’éjection. Pendant l’utilisation, maintenez les personnes à l’extérieur

d

e la zone de travail.

6

3. Attention aux lames tranchantes: Détacher la fiche de l’alimentation élec-

t

rique avant de procéder à l’entretien ou en cas de câble endommagé. Ne pas

introduire les mains et les pieds à l’intérieur du siège de la lame.

64. Attention: tenir le câble d’alimentation électrique loin de la lame.

65. Seulement pour les tondeuses à batterie

6

6. Ne pas exposer la machine à la pluie ou à l'humidité.

6

7. Attention aux lames tranchantes: Après l’extinction du moteur les lames

continuent à tourner.

Valeurs maximales de bruit et de vibrations

Modèle ................................................................................................. EL 380 EL 420

N

iveau de pression acoustique à l’oreille de l'opérateur

(en référence à la norme 81/1051/CEE) ..................................... db(A) 80,3 82,9

– Incertitude de la mesure (2006/42/CE - EN 27574) ............... db(A) 1,4 0,4

Niveau de puissance acoustique mesuré

(

en référence aux directives 2000/14/CE, 2005/88/CE) ............. db(A) 92,2 95,2

–

Incertitude de la mesure (2006/42/CE - EN 27574) ............... db(A) 0,7 0,2

N

iveau de puissance acoustique garanti

(en référence aux directives 2000/14/CE, 2005/88/CE) ............. db(A) 94 96

N

iveau de vibrations (en référence à la norme EN 1033) ............. m/s

2

1

,87 1,29

– Incertitude de la mesure (2006/42/CE - EN 12096) ................. m/s

2

0,6 0,5

IDENTIFICATION LABEL AND MACHINE COMPONENTS

1. Acoustic power level according to directive 2000/14/EC

2. Conformity marking according to directive 2006/42/EC

3. Year of manufacture

4. Type of lawnmower

5. Serial number

6. Name and address of Manufacturer

7. Supply voltage and frequency

8. Article Code

9. Motor power and speed

10. Mass in kilograms

As soon as you have purchased the machine, write the identification numbers

(3 - 4 - 5) in the spaces on the last page of the manual.

11. Chassis 12. Motor 13. Blade (Blade) 14. Stone-guard 15. Grass-catcher

16. Handle 17. Control lever 18. Electric cable fitting

Do not dispose of electrical equipment with household waste material. In ob-

servance of European Directive 2002/96/EC on waste electrical and elec-

tronic equipment and its implementation in accordance with national regula-

tions, electric equipment that has reached the end of its life must be collected

separately and recycled in an ecologically compatible way.If electrical equipment is

disposed of in dumps or in landfills, hazardous substances can leak into the ground-

water and get into the food chain, damaging your health and well-being. For further

information on the disposal of this product, contact a domestic waste collection au-

thority or your dealer.

DESCRIPTION OF SYMBOLS ON CONTROLS (where applicable)

21. Stop 22. Running

SAFETY REQUIREMENTS - Your lawnmower must be used carefully.Symbols have

therefore been placed on various parts of the machine to remind you of the main pre-

cautions to be taken.Their meaning is explained below.You are also asked to care-

fully read the safety regulations in the specific chapter of this manual.

Replace damaged or unreadable labels.

61. Warning: Read the instruction manual before using the machine.

62. Risk of thrown objects. Keep all persons away from the work area whilst

mowing.

63. Beware of sharp blades: Remove plug from mains before maintenance or if

cord is damaged.Do not put hands or feet near or under the opening of the blade

housing.

64. Warning: Keep the power cable away from the blade.

65. Only for battery-operated lawnmowers.

66. Do not expose the machine to rain or humidity.

67. Beware of sharp blades: Blades continue to torate after motor is switched off.

Maximum noise and vibration levels

Model ................................................................................................... EL 380 EL 420

Operator ear noise pressure level

(according to regulation 81/1051/EEC) ...................................... db(A) 80,3 82,9

– Measurement uncertainty (2006/42/EC – EN 27574) ............. db(A) 1,4 0,4

EN

Measured acoustic power level

(

according to directive 2000/14/EC, 2005/88/EC) ...................... db(A) 92,2 95,2

–

Measurement uncertainty (2006/42/EC – EN 27574) ............. db(A) 0,7 0,2

G

uaranteed acoustic power level

(according to directive 2000/14/EC, 2005/88/EC) ...................... db(A) 94 96

V

ibration level (according to the regulation EN 1033) ................... m/s

2

1

,87 1,29

–

Measurement uncertainty (2006/42/EC – EN 12096) ............... m/s

2

0

,6 0,5

T

YPENSCHILD UND MASCHINENBAUTEILE

1. Schalleistungspegel gemäß Richtlinie 2000/14/EG

2. Konformitätszeichen (CE) gemäß Richtlinie 2006/42/EG

3. Herstellungsjahr

4

. Typ des Rasenmähers

5. Kennnummer

6. Name und Anschrift des Herstellers

7

. Spannung und Netzfrequenz

8. Artikelnummer

9

. Motorleistung und Drehzahl

1

0. Gewicht in kg

T

ragen Sie sofort nach dem Kauf der Maschine die Kennnummern (3 - 4 - 5) in die

entsprechenden Felder auf der letzten Seite des Handbuchs ein.

1

1. Chassis 12.Motor 13. Schneidwerkzeug (Messer) 14. Prallblech 15. Gras-

fangeinrichtung 16. Griff 17. Bedienungsschalter 18. Halter des elektrischen

K

abels.

Elektrische Geräte dürfen nicht mit dem Hausmüll entsorgt werden. Gemäß

der EU-Richtlinie 2002/96/EG über elektrische und elektronische Altgeräte

und ihrer Umsetzung in nationales Recht müssen Elektroaltgeräte getrennt

gesammelt und einer umweltgerechten Wiederverwertung zugeführt werden.Wer-

den die Geräte in einer Mülldeponie oder im Boden entsorgt, können die Schadstoffe

das Grundwasser erreichen und in die Lebensmittelkette erlangen, und so unserer

Gesundheit und unserem Wohlbefinden schaden. Wenden Sie sich für weiterge-

hende Informationen zur Entsorgung dieses Produkts an die verantwortliche Stelle

für die Entsorgung von Hausmüll oder an Ihren Händler.

BESCHREIBUNG DER SYMBOLE AN DEN BEDIENELEMENTEN

(wo vorgesehen)

21. Stopp 22. Ein

SICHERHEITSVORSCHRIFTEN - Ihr Rasenmäher muss mit Vorsicht benutzt wer-

den. Aus diesem Grund wurden an der Maschine Symbole angebracht, die Sie auf

die wichtigsten Vorsichtsmaßnahmen hinweisen. Die Bedeutung der Symbole ist

nachstehend erklärt. Wir weisen auch noch einmal ausdrücklich auf die Sicher-

heitsvorschriften hin, die Sie im entsprechenden Kapitel der Bedienungsanleitungen

finden.

Beschädigte oder unleserliche Etiketten bitte austauschen.

61. Achtung: Vor dem Gebrauch des Rasenmähers lesen Sie die Gebrauchsan-

weisungen.

62. Auswurfrisiko.Während des Gebrauchs, halten Sie Dritte von der Arbeitszone

entfernt.

63. Achten Sie auf die scharfen Messer: Den Netzstecker herausziehen, bevor

man Wartungsarbeiten durchführt oder wenn das Kabel beschädigt ist. Führen

Sie nie Hände oder Füße in die Öffnung unter dem Schneidwerk.

64. Achtung: Netzkabel von den Schneidwerkzeugen fernhalten.

65. Nur für batteriebetriebene Rasenmäher.

66. Die Maschine nicht dem Regen oder Feuchtigkeit aussetzen.

67. Achten Sie auf die scharfen Messer: Die Messer drehen sich nach Aus-

schalten des Motors weiter.

Maximale Geräusch- und Vibrationswerte

Modell .................................................................................................. EL 380 EL 420

Gewichteter Schalldruck am Ohr des Bedieners

(gemäß der Norm 81/1051/EWG) .............................................. db(A) 80,3 82,9

– Messungenauigkeit (2006/42/EG – EN 27574) ....................... db(A) 1,4 0,4

Gemessener Schallleistungspegel

(gemäß Richtlinie 2000/14/EG, 2005/88/EG) ............................. db(A) 92,2 95,2

– Messungenauigkeit (2006/42/EG – EN 27574) ....................... db(A) 0,7 0,2

Garantierter Schallleistungspegel

(gemäß Richtlinie 2000/14/EG, 2005/88/EG)............................... db(A) 94 96

Gewichteter Vibrationspegel (gemäß der Norm EN 1033) ........... m/s

2

1,87 1,29

– Messungenauigkeit (2006/42/EG – EN 12096) ......................... m/s

2

0,6 0,5

DE

7

Page is loading ...

26

SAFETY REGULATIONS

TO BE OBSERVED SCRUPULOUSLY

IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE

KEEP FOR FUTURE REFERENCE

I

MPORTANT - Only use the lawnmower for the purpose for which it was designed,

namely mowing and collecting grass.Any other usage may be hazardous and harm

persons and/or damage things.Examples of improper use may include, but are not

limited to:

– transporting persons, children or animals on the machine;

–

letting oneself be transported by the machine;

–

using the machine to tow or push loads;

–

using the machine for leaf or debris collection;

– using the machine to trim hedges, or for cutting vegetation other than grass;

– use of the machine by more than one person;

– using the blades on surfaces other than grass.

1) Read the instructions carefully.Become familiar with the controls and the pro-

p

er use of the lawnmower. Learn how to stop the motor quickly.

2) Never allow children or persons unfamiliar with these instructions to use the law-

n

mower. Local regulations can restrict the minimum age of the operator.

3) Never use the lawnmower:

–

when people, especially children or pets are nearby;

– if the operator has taken medicine or substances that may impair his ability to

r

eact and be attentive.

4) Bear in mind that the operator or user is responsible for accidents or unexpec-

ted events occurring to other people or their property.

1

) While mowing, always wear sturdy footwear and long trousers.Do not operate

the lawnmower when barefoot or wearing open sandals.Avoid wearing clothing that

i

s loose fitting or has hanging cords or ties.

2) Thoroughly inspect the entire work area and remove anything that could be

thrown by the machine or damage the cutting unit or motor (stones, branches, iron

wire, bones, etc.).

3) Before use, always inspect generally and in particular to see that the blade,

screws and cutting unit are not worn or damaged.Replace damaged or worn bla-

des and screws in their entirety to preserve balance.

4) Before use check the supply and extension cord for signs of damage or aging.

If the cord becomes damaged during use, disconnect the cord from the supply im-

mediately. DO NOTTOUCH THE CORD BEFORE DISCONNECTING THE SUP-

PLY. Do not use the machine if the cord is damaged or worn.

1) Mow only in daylight or good artificial light.

2) Avoid mowing wet grass or when it is raining.

3) Make sure you have a steady foothold on slopes.

4) Never run, always walk; do not let the lawnmower pull you.

5) Always mow transversely on slopes and never up and down.

6) Be extremely carefully when changing directions on slopes.

7) Never mow on overly steep slopes.

8) Be extremely careful when pull the lawnmower toward you.

9) Immobilise the blade if the lawnmower must be inclined for transport, when mo-

ving over surfaces other than grass and when the lawnmower is transported from

or to an area that must be cut.

10) Never operate the lawnmower with damaged guards or without the grass-cat-

cher or stone-guard.

11) On power-driven models, disengage wheel drive before starting up the motor.

12) Start up the motor carefully according to the instructions, keeping feet away

from the blade.

13) Do not incline the lawnmower when starting the motor, unless necessary for

start up.In this event, do not incline it more than is absolutely necessary and only

lift the part that is far from the operator. Always ensure that both hands are in the

working position before lowering the lawnmower again.

14) Never place your hands and feet near or under rotating parts. Keep away from

the discharge opening.

15) Do not lift or transport the lawnmower when the motor is running.

16) Stop the machine and remove plug from the socket.Make sure that all moving

parts have come to a complete stop:

– when transporting the machine;

– whenever you leave the machine.

– before clearing blockages or unclogging chute;

– before checking, cleaning or working on the machine;

– after striking a foreign object.Inspect the machine for damage and make repairs

before restarting and operating the machine.

If the machine starts to vibrate abnormally (check immediately):

– inspect for damage;

– replace or repair any damaged parts at a specialised centre;

– check for and tighten any loose parts.

17) Stop the motor:

– whenever you remove or reattach the grass-catcher;

– whenever you adjust the cutting height.

18) When mowing, always keep a safe distance from the rotary blade, given by the

C) DURING USE

B) PRELIMINARY OPERATIONS

A) TRAINING

EN

length of the handle.

19) WARNING – If something breaks or an accident occurs during mowing, turn

o

ff the motor immediately and move the machine away to prevent further damage;

if an accident occurs with injuries or third parties are injured, carry out the first aid

measures most suitable for the situation immediately and contact the medical au-

thorities for any necessary health care. Carefully remove any debris that might

c

ause damage or harm persons or animals should it not be seen.

1) Be careful during adjustment of the machine to prevent entrapment of the fin-

g

ers between moving blades and fixed parts of the machine.

2

) Always allow the machine to cool down before storing.

3)When servicing the blades be aware that, even though the power sources is swit-

ched off, the blades can still be moved.

4) Keep all nuts and screws tight to be sure the machine is always in safe working

c

ondition. Routine maintenance is essential for safety and for maintaining a high

performance level.

5) To reduce fire hazards, keep lawnmower and in particular, the motor, free of

grass, leaves, or excessive grease. Never leave containers with cut grass inside

a storage area.

6

) Check the stone-guard and grass-catcher frequently for wear or deterioration.

7) For safety reasons, never use the machine when it has worn or damaged parts.

P

arts must be replaced and not repaired. Use original spare parts. Parts that are

not of the same quality can damage the equipment and impair your safety.

1) Before each use, check the machine for damage. Any repairs must be done at

a specialised centre.Turn off the machine and disconnect the plug from the soc-

ket if the machine begins to vibrate abnormally, then contact a specialised centre

f

or inspection.

2) Keep both hands on the grip during start up.

3

) Parts subject to wear must only be replaced at a specialised centre.

4) Never use the machine if the power cable or extension cable are damaged or

w

orn.

5) Never connect a damaged cable to a mains socket and never touch a damaged

c

able that is connected to the mains socket. Damaged or deteriorated cables may

cause contact with energised parts.

6) Do not touch the blade until the machine is disconnected from the mains soc-

ket and that the blade is completely still.

7) Keep the extension cable away from the blade.The blade can damage the ca-

ble and cause contact with energised parts.

8) Carefully read the instructions for using the machine safely.

9) Power up the machine using a differential switch (RCD - Residual Current De-

vice) with a tripping current of max. 30 mA.

10) If the machine’s power cable is damaged, it can only be replaced with an ori-

ginal spare part by your dealer or an authorised service centre.

1) The permanent connection of any electrical equipment to the mains of a buil-

ding must be installed by a qualified electrician in conformity with the regulations

in force. Incorrect wiring can cause serious injury and even death.

2) WARNING: DANGER! Moisture and electricity are not compatible:

– always handle and connect electric cables in dry conditions;

– never allow electric sockets or cables to contact wet areas (puddles or wet

grass);

– connections between cables and sockets must always be watertight. Only use

extension leads with intact, watertight and approved sockets sold on the mar-

ket.

3) The quality of the extension leads must be no less than H07RN-F or H07VV-F,

with a minimum section of 1.5 mm

2

and a recommended maximum length of 25

m.

4) Attach the extension lead to the cable fastener before starting the machine.

5) Before starting work, fit the discharge guards (grass-catcher or stone-guard).

6) Never run the lawnmower over the electric cable.While mowing, always drag the

cable behind the lawnmower on the side where grass has already been cut. Use

the cable fastener to prevent the cable from disconnecting accidentally as indica-

ted in this manual. Make sure it is connected to the socket without being forced.

7) Never use the power cable to pull the lawnmower or pull the cable to remove the

plug. Do not expose the cable to sources of heat, or let it come into contact with

oil, solvents and sharp objects.

8) Wear work gloves for disassembling and reassembling blades.

9) Keep the blade balanced during sharpening. All work on the blade (disassem-

bly, sharpening, balancing, reassembly and/or replacing) are demanding jobs

that require special skills as well as special tools. For safety reasons, these jobs

are best carried out at a specialised centre.

1) Whenever the machine is to be handled, lifted, transported or tilted you must:

– wear sturdy work gloves;

– grasp the machine at the points that offer a safe grip, taking account of the

weight and its distribution.

– use an appropriate number of people for the weight of the machine and the

characteristics of the vehicle or the place where it must be placed or collec-

ted.

2) During transport, fasten the machine securely with cables or chains.

G) TRANSPORTATION AND HANDLING

F) ADDITIONAL WARNINGS

E) GENERAL PRECAUTIONS

D) MAINTENANCE AND STORAGE

27

OPERATING INSTRUCTIONS

NOTE - The number which precedes each paragraph links the

references in the text to the respective illustrations (listed on

page 2 and following pages).

NOTE - The machine can be supplied with some parts al-

ready assembled.

WARNING - Unpacking and completing the assembly

should be done on a flat and stable surface, with enough

space for moving the machine and its packaging, al-

ways using suitable equipment.

Disposal of the packaging should be done in accor-

dance with the local regulations in force.

Handle type “I”

Move the two lower parts of the handle (11) and (12), already

pre-assembled, to the working position, matching the tooth

marked with «>» EXCLUSIVELY with one of the two com-

partments marked with «1» or «2» of the teeth, according to

the desired height, then lock the two lower levers (13).

The position must be the same for both sides.

Assemble the upper part of the handle (14) and lock it to the

two lower parts (11) and (12) using the upper levers (15) (pre-

viously removed from their respective holes), inserted in one

of the two holes (3) or (4) according to the desired final height.

To adjust the holding force, each lever (15) must be released

then tightened or loosened on its axle as much as is neces-

sary to ensure that the upper part (14) is firmly fastened to the

lower parts of the handle (11) and (12), without using exces-

sive force to lock or release them.

Fasten the cable (16) to the cable fasteners (17) and (18) as

shown.

Handle type “II”

Move the two lower parts of the handle (11) and (12), already

pre-assembled, to the working position, matching the tooth

marked with «>» EXCLUSIVELY with one of the two com-

partments marked with «1» or «2» of the teeth, according to

the desired height, then lock the two lower knobs (13).

The position must be the same for both sides.

Assemble the upper part of the handle (14) and lock it to the

two lower parts (11) and (12) using the upper knobs (15)

(previously removed from their respective holes), inserted in

one of the two holes (3) or (4) according to the desired final

height.

Fasten the cable (16) to the cable fasteners (17) and (18) as

shown.

The correct position of the electric cable fitting (19) is as

shown.

Join the two side components (1) and (2) of the grass-

catcher, then fit the top part (3), inserting all the outer fittings

correctly.

Assemble the lever (4) on the top part of the grass-catcher,

snapping it into the appropriate seats.

1.2

1.1b

1.1a

1. COMPLETE ASSEMBLY

EN

The motor is controlled by a dual-action switch to pre-

vent accidental start ups.

Press the button (2) and pull the lever (1), or one of the two

levers (1a) for start up.

The motor will automatically stop when the lever (1) or both

levers (1a) are released.

The cutting height is adjusted by the specific lever (1).

DO THIS WHEN THE BLADE IS STOPPED.

NOTE -This machine lets you mow lawn in different ways;be-

fore starting work, prepare the machine based on how the

lawn is to be mowed.

DO THIS WHEN THE MOTOR IS OFF.

Preparation for mowing and collection

in grass-catcher

– Lift the rear stone-guard (1) and fasten the grass-catcher (2)

correctly as shown in the illustration.

Preparation for mowing and rear

grass discharge

– Remove the grass-catcher and make sure that the rear

stone-guard (1) remains down stably.

Preparation for mowing and mulching

(if provided)

– Lift the rear stone-guard (1), fit the deflector cap (5) in the

outlet and push it down until the lower contour fastens

properly to the edge of the outlet.

To remove the deflector cap (5), lift the stone-guard (1) and

pull it, keeping it lifted so as to unfasten the lower contour

from the edge of the outlet.

Fasten the extension cable correctly as shown.

To start the motor, push the safety button (2) and pull the

switch lever (1) or one of the two levers (1a).

IMPORTANT - When starting up the machine, there can be

momentary drops in voltage.

Make sure that its impedance is lower than 0.42 ohm to pre-

vent disturbances to other equipment connected to the power

supply.

While mowing, make sure the electric cable is always

behind you and on the side of the lawn that has already been

cut.

The appearance of the lawn will improve if you alternate cut-

ting in both directions at the same height.

• For mulching: always avoid removing a large quantity of

grass.Never cut more than one third of the total grass height

2.1

2. CONTROL DESCRIPTION

3. GRASS CUTTING

2.2

3.3

3.2

3.1c

3.1b

3.1a

Reassemble the blade (2) with the code and markings facing

the ground, following the steps indicated in the illustration.

Tighten the central screw (1) using a torque wrench set to 16-

20 Nm.

Do not spray water onto and avoid wetting the motor

and electrical components.

Do not use aggressive liquids to clean the chassis.

Environmental protection should be a priority of considerable

importance when using the machine, for the benefit of both so-

cial coexistence and the environment in which we live.

– Try not to cause any disturbance to the surrounding area.

– Scrupulously comply with local regulations for the disposal

of waste materials after mowing.

– Scrupulously comply with local regulations for the disposal

of packaging, deteriorated parts or any elements with a

strong environmental impact; this waste must not be dis-

posed of as normal waste, it must be separated and taken

to specified waste disposal centres where the material will

be recycled.

– When decommissioning, do not pollute the environment

with the machine, hand it over to a disposal centre, in ac-

cordance with the local regulations in force.

For any doubts or problems, please do not hesitate to contact

your nearest Customer Service Centre or Your Dealer.

4.3

5. ENVIRONMENTAL PROTECTION

in a single passage! Regulate the forward speed according

to the lawn conditions and the amount of grass removed.

When finished mowing, release the lever (1) or both

levers (1a).

Disconnect the extension cable FIRST from the general

socket (2) THEN from the side of the lawnmower switch (3).

WAIT UNTIL THE BLADE STOPS before making an adjust-

ments to the lawnmower.

IMPORTANT - If the motor stops because it is overheated

while mowing, you must wait about 5 minutes before restart-

ing it.

IMPORTANT - Routine and accurate maintenance is es-

sential in maintaining original machine safety and per-

formance levels.

Store the lawnmower in a dry place.

1) Wear sturdy work gloves before cleaning, maintaining or

adjusting the machine.

2) Accurately wash the machine with water after cutting, re-

move grass debris and mud accumulated in the chassis to

prevent it from drying and causing problems the next time

the lawnmower is used.

3) Always make sure the air intakes are free of debris.

If necessary, the machine can be stored vertically,

hanging from a hook.

WARNING - Make sure the hook and its fastening system

are adequate and able to sustain the machine’s weight;

exercise caution and make sure children or animals do

not climb on the machine, weighing down the hook.

Fasten the machine so that the blade faces a wall or is

properly covered, so it is not dangerous in the event of

accidental contact with persons, children or animals.

To store the machine vertically, release the levers (1 -Type “I”)

or loosen the knobs (2 - Type “II”) and turn the handle forward

so the tooth marked with «>» matches EXCLUSIVELY with the

compartment marked «S» of the teeth, then lock the levers

(1 - Type “I”) or the knobs (2 - Type “II”).The position must be

the same for both sides.

The position must be the same for both sides.

Each adjustment made to the blade is best if done at

a specialised Centre that has the most appropriate tools.

Only blades with the following code must be used on this ma-

chine:

81004154/0 (for model 380)

81004155/0 (for model 420)

Blades must always be marked «GGP». Given product evo-

lution, the above mentioned blades may be replaced in time

by others, with similar interchangeable and operating safety

features.

3.4

4.2

4.1

4. STORAGE AND MAINTENANCE

28

Page is loading ...

Mountfield EL420 Operating instructions

This manual is also suitable for

Mountfield EL420 Operating instructions

in other languages

Related papers

Other documents