Pride QUANTUM SERIES Owner's manual

QUANTUM

SERIES

32 Wedgwood Road • Bicester, Oxon OX26 4UL

Including Models: Quantum 610

SAFETY GUIDELINES

Pride Mobility Products Ltd.

INFMANU3077/Rev C/January 2008

Quantum Rehab Specialist:_____________________________________________________________________

Address:________________________________________________________________________________

Phone Number:___________________________________________________________________________

Purchase Date:____________________________________________________________________________

NOTE: This owner’s manual is compiled from the latest specifications and product information available

at the time of publication. We reserve the right to make changes as they become necessary. Any changes to

our products may cause slight variations between the illustrations and explanations in this manual and the

product you have purchased. The latest/current version of this manual is available on our website.

The symbols below are used throughout this owner's manual and on the power chair to identify warnings and important

information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage or malfunction. On the product,

this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any time or

in any circumstances. Performing a prohibited action can cause personal injury and/or equipment

damage. On the product, this icon is represented as a black symbol with a red circle and red

slash.

Quick Reference Information

088 609 661

WARNING! A Quantum Rehab Specialist or a qualified technician must perform the initial setup

of this power chair and must perform all of the procedures in this manual.

Quantum 610 www.quantumrehab.com 3

I. INTRODUCTION....................................................................................................................................4

II. SAFETY....................................................................................................................................................5

III. YOUR POWER CHAIR.......................................................................................................................17

IV. ASSEMBLY............................................................................................................................................21

V. COMFORT ADJUSTMENTS...........................................................................................................24

VI. BATTERIES AND CHARGING .......................................................................................................30

VII. CARE AND MAINTENANCE ...........................................................................................................34

VIII.WARRANTY...........................................................................................................................................41

APPENDIX I - SPECIFICATIONS ..........................................................................................................42

CONTENTS

4 www.quantumrehab.com Quantum 610

I. INTRODUCTION

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The power chair you have purchased combines state-of-

the-art components with safety, comfort and styling in mind. We are confident that these design features will provide you

with the conveniences you expect during your daily activities. Once you understand how to safely operate and care for

your power chair, it should give you years of trouble free operation and service.

Read and follow all instructions, warnings and notes in this manual before attempting to operate your power chair for the

first time. You must also read all instructions, warnings and notes contained in any supplemental instructional booklets for

the controller, front riggings and/or seating system that accompanied your power chair before initial operation. Your safety

depends upon you, as well as your provider, caretaker or healthcare professional in using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assistance for setup

or operation, please contact your authorised Pride Dealer. Failure to follow the instructions in this manual and

those located on your power chair can lead to personal injury and/or damage to the power chair, and may void

the warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter or modify this product or remove or

render inoperable or unsafe any guards, shields or other safety features of this product; fail, refuse or neglect to install any

retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.

SHIPPING AND DELIVERY

Before using your power chair, make sure your delivery is complete as some components may be individually packaged.

If you do not receive a complete delivery, please contact your authorised Pride Dealer immediately. Where damage has

occurred during transport, either to the packaging or content, please contact the delivery company responsible.

INFORMATION EXCHANGE

We want to hear your questions, comments and suggestions about this manual. We would also like to hear about the safety

and reliability of your new power chair, and about the service you received from your authorised Pride Dealer.

Please notify us of any change of address, so we can keep you apprised of important information about safety, new

products and new options that can increase your ability to use and enjoy your power chair. Please feel free to contact us at

the address below:

Pride Mobility Products Ltd.

32 Wedgwood Road

Bicester, Oxon OX26 4UL

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and

we will be glad to send you a new one immediately.

Quantum 610 www.quantumrehab.com 5

II. SAFETY

PRODUCT SAFETY SYMBOLS

The symbols below are used on the power chair to identify warnings, mandatory actions and prohibited actions. It is very

important for you to read and understand them completely.

Read and follow the information in the owner’s manual.

Maximum seating weight.

Do not allow unsupervised children to play near the power chair while the batteries are

charging.

Keep your hands away from the tyres when driving. Be aware that loose fitting clothing

can become caught in drive tyres.

Use correct tie-down points for controller harness to prevent the harness from getting

caught in the drive tyres, pinched in the seat frame or damaged when passing through

doorways.

Do not use a cell phone, walkie/talkie, laptop, or other radio transmitter while operating.

Avoid exposure to rain, snow, ice, salt or standing water whenever possible. Maintain and

store in a clean and dry condition.

6 www.quantumrehab.com Quantum 610

II. SAFETY

Removal of grounding prong can create electrical hazard. If necessary, properly install an

approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.

Do not place your power chair in freewheel mode while on an incline.

Do not lift the mobility product while seated in it.

Keep tools and other metal objects away from battery terminals.

Do not place your power chair in freewheel mode while on an decline.

Do not lift the mobility product while seated in it.

Wear safety goggles.

Quantum 610 www.quantumrehab.com 7

Do not connect an extension lead to the AC/DC converter or the battery charger.

Corrosive chemicals contained in battery. Use only AGM or Gel-Cell batteries to reduce

the risk of leakage or explosive conditions.

Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new

batteries. Always replace both batteries at the same time.

II. SAFETY

Explosive conditions exist!

EMI-RFI - This product has been tested and passed at an immunity level of 20 V/m.

Battery Set Configuration:

+ = Positive (Red) Terminal Post

- = Negative (Black) Terminal Post

Connect Red wire to Red Positive (+) Terminal Post

Connect Black wire to Black Negative (–) Terminal Post

8 www.quantumrehab.com Quantum 610

Disposal and recycling - Contact your authorised Pride Dealer for information on

proper disposal and recycling of your Pride product and its packaging.

Locked and in drive mode.

Place unit on level ground and stand behind or to one side when changing from drive

mode to freewheel mode or freewheel mode to drive mode.

Unlocked and in freewheel mode.

Battery charger for indoor use only.

Contains Lead.

II. SAFETY

Quantum 610 www.quantumrehab.com 9

II. SAFETY

SAFETY

MANDATORY! Do not operate your new power chair for the first time without completely reading

and understanding this owner’s manual.

Your power chair is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an extensive

variety of products to best fit the individual needs of the power chair user. Please be aware that the final selection and

purchasing decision regarding the type of power chair to be used is the responsibility of the power chair user, who is

capable of making such a decision, and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly fitted the power chair

to the user and has assisted the prescribing healthcare professional and/or the Quantum Rehab Specialist in the instruction

process for the use of the product.

There are certain situations, including some medical conditions, where the power chair user will need to practice operating

the power chair in the presence of a trained attendant. A trained attendant can be defined as a family member or care

professional specially trained in assisting a power chair user in various daily living activities.

As you begin using your power chair during daily activities, you will probably encounter situations in which you will need

some practice. Simply take your time and you will soon be in full and confident control as you manoeuvre through door-

ways, on and off of lifts, up and down ramps and over moderate terrain.

Below are some precautions, tips and other safety considerations that will help the user become accustomed to operating

the power chair safely.

Modifications

Pride has designed and engineered your power chair to provide maximum mobility and utility. A wide range of accessories

is available from your Quantum Rehab Specialist to further customise your power chair to better suit your needs and/or

preferences. However, under no circumstances should you modify, add, remove or disable any feature, part or function of

your power chair.

WARNING! Do not modify your power chair in any way not authorised by Pride. Do not use

accessories if they have not been tested or approved for Pride products.

Pre-Ride Safety Check

Get to know the feel of your power chair and its capabilities. Pride recommends that you perform a safety check before

each use to make sure your power chair operates smoothly and safely.

Perform the following inspections prior to using your power chair:

! Check for proper tyre inflation. Maintain but do not exceed 2.4 bar (35 psi, 240 kPa) in each tyre if equipped with

pneumatic tyres.

! Check all electrical connections. Make sure they are tight and not corroded.

! Check all controller connections to the power base. Make sure they are secured properly.

! Check the brakes. See VII. “Care and Maintenance.”

! Check battery charge. See VI. “Batteries and Charging.”

NOTE: If you discover a problem, contact your Quantum Rehab Specialist for assistance.

10 www.quantumrehab.com Quantum 610

II. SAFETY

Weight Limitations

Your power chair is rated for a maximum weight capacity. Please refer to the specifications table for this limit.

MANDATORY! Stay within the specified weight capacity of your power chair. Exceeding the weight

capacity voids your warranty. Pride will not be held responsible for injuries and/or property damage

resulting from failure to observe weight limitations.

WARNING! Do not carry passengers on your power chair. Carrying passengers on your power

chair may affect the centre of gravity, resulting in a tip or a fall.

Tyre Inflation

If your power chair is equipped with pneumatic tyres, you should check or have the air pressure checked regularly. Proper

inflation pressures will prolong the life of your tyres and help ensure the smooth operation of your power chair.

WARNING! It is important that 2.4 bar (35 psi, 240 kPa) tyre pressure be maintained in pneumatic

tyres at all times. Do not underinflate or overinflate your tyres. Low pressure may result in loss of

control, and overinflated tyres may burst. Failure to maintain 2.4 bar (35 psi, 240 kPa) tyre pressure

in pneumatic tyres at all times may result in tyre and/or wheel failure.

WARNING! Inflate your power chair drive tyres from a regulated air source with an available

pressure gauge. Inflating your tyres from an unregulated air source could overinflate them, resulting

in a burst tyre.

Incline Information

More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access. Some ramps

may have turning switchbacks (180-degree turns) that require you to have good cornering skills on your power chair.

! Proceed with extreme caution as you approach the downgrade of a ramp or other incline.

! Take wide swings with your power chair’s front wheels around any tight corners. If you do that, the power chair’s rear

wheels will follow a wide arc, not cut the corner short and not bump into or get hung up on any railing corners.

! When driving down a ramp, keep the power chair’s speed adjustment set to the slowest speed setting to ensure a

safely controlled descent.

! Avoid sudden stops and starts.

When climbing an incline, try to keep your power chair moving. If you must stop, start up again slowly and then accelerate

cautiously. When driving down an incline, set your power chair to the slowest setting and drive in the forward direction

only. If your power chair starts to move down the incline faster than you anticipated or desired, allow it to come to a

complete stop by releasing the joystick, then push the joystick forward slightly to ensure a safely controlled descent.

WARNING! When on any sort of an incline or decline, never place the power chair in

freewheel mode while seated on it or standing next to it.

WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of

the incline. Drive your power chair straight up the incline. This greatly reduces the

possibility of a tip or a fall. Always exercise extreme caution when negotiating an

incline.

WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas

covered with snow, ice, cut grass or wet leaves).

WARNING! Never travel down an incline rearward. Doing so may cause the power

chair to tip. Always exercise extreme caution when negotiating an incline.

Quantum 610 www.quantumrehab.com 11

II. SAFETY

Figure 1. Maximum Safe Slope (Ascending and Descending)

WARNING! If your power chair is equipped with a reclining seatback, do not attempt to negotiate

inclines with the seat in a reclined position. Do not attempt to negotiate obstacles with the seat

in a reclined position unless an attendant is present to help stabilise the chair. Failure to heed

could result in the power chair tipping over.

WARNING! Even though your power chair is capable of climbing slopes greater than those illustrated

in figure 1, do not, under any circumstances, exceed the incline guidelines or any other

specifications presented in this manual. Doing so could cause instability in your power chair.

Pride recommends that the maximum slope of an incline you attempt to safely ascend or descend on your power chair does

not exceed 8.7% (5°). See figure 1.

WARNING! Any attempt to climb or descend a slope steeper than 8.7% (5°) may put your power

chair in an unstable position and cause it to tip.

Freewheel Mode

Your power chair is equipped with two manual freewheel levers to allow for manual manoeuvrability by a trained attendant.

For more information about how to place your power chair into and out of freewheel mode, see III. “Your Power Chair.”

WARNING! Do not use your power chair in freewheel mode without an attendant present.

WARNING! Do not attempt to personally place your power chair in freewheel mode

while seated on it. Ask an attendant for assistance if necessary.

WARNING! Do not place your power chair in freewheel mode while on an incline or

decline. This could cause the chair to roll uncontrollably on its own.

Braking Information

Your power chair is equipped with two powerful brake systems:

! Regenerative — uses electricity to rapidly slow the vehicle when the joystick returns to the centre/stop position.

! Disc Park Brake — activates mechanically after regenerative braking slows the vehicle to near stop, or when power is

removed from the system for any reason.

Cornering Information

While your power chair is equipped with front and rear castor wheels, excessively high cornering speeds can still create the

possibility of tipping. Factors which affect the possibility of tipping include, but are not limited to: cornering speed, steering

angle (how sharply you are turning), uneven road surfaces, inclined road surfaces, riding from an area of low traction to an

area of high traction (such as passing from a grassy area to a paved area – especially at high speed while turning) and

abrupt directional changes. High cornering speeds are not recommended. If you feel that you may tip over in a corner,

reduce your speed and steering angle (i.e., lessen the sharpness of the turn) to prevent your power chair from tipping.

WARNING! When cornering sharply, reduce your speed and maintain a stable centre of gravity.

This greatly reduces the possibility of a tip or fall.

12 www.quantumrehab.com Quantum 610

KERB

II. SAFETY

Public Streets and Roadways

WARNING! You should not operate your power chair on public streets and roadways. Be aware

that it may be difficult for traffic to see you when you are seated on your power chair. Obey all

local pedestrian traffic rules. Wait until your path is clear of traffic, and then proceed with extreme

caution.

Outdoor Driving Surfaces

Your power chair is designed to provide optimum stability under normal driving conditions—dry, level surfaces composed

of concrete, blacktop or tarmac. However, Pride recognises that there will be times when you will encounter other surface

types. For this reason, your power chair is designed to perform admirably on packed soil, grass and gravel. Feel free to use

your power chair safely on lawns and in park areas.

! Reduce your power chair’s speed when driving on uneven terrain and/or soft surfaces.

! Avoid tall grass that can entangle the running gear.

! Avoid loosely packed gravel and sand.

! If you feel unsure about a driving surface, avoid that surface.

Inclement Weather Precautions

Exposure of your power chair to inclement weather conditions should be avoided whenever possible. If suddenly caught

up in rain, snow, severe cold or heat while operating your power chair, proceed to shelter at the earliest opportunity.

Thoroughly dry your power chair before storing, charging or operating your power chair.

PROHIBITED! Operating in rain, snow, salt, mist/spray conditions and on icy/slippery surfaces can

have an adverse affect on the electrical system. Maintain and store your power chair in a dry and

clean condition.

WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of upholstered

and non-upholstered items on the power chair, possibly resulting in skin irritation. Exercise caution

when using the power chair in extremely hot or cold conditions or when exposing your power

chair to direct sunlight for prolonged periods of time.

Stationary Obstacles (Steps, Kerbs, etc.)

Proceed with extreme caution when driving near raised surfaces, unprotected ledges and/or drop-offs (kerbs, porches,

stairs, etc.). Be sure your power chair is traveling perpendicular to any kerb you may be required to navigate. See figure 2.

WARNING! Do not attempt to have your power chair climb or descend an obstacle that is higher

than 5 cm (2 in.) unless you have the assistance of an attendant.

WARNING! If your power chair is equipped with a kerb climber, do not attempt to climb any kerb

in excess of 5 cm (2 in.) in height. Do not approach kerbs at an angle; instead approach any kerb

you intend to ascend or descend in the forward position

WARNING! Do not attempt to have your power chair proceed rearward down any step, kerb or

other obstacle. This may cause the power chair to tip.

Figure 2. Correct Kerb Approach

Figure 3. Incorrect Kerb Approach

Quantum 610 www.quantumrehab.com 13

II. SAFETY

Stairs and Escalators

Power chairs are not designed to travel up or down stairs or escalators. Always use a lift.

WARNING! Never use your power chair to negotiate steps or escalators.

Doors

! Determine if the door opens toward or away from you.

! Drive your power chair gently and slowly forward to push the door open or drive your power chair gently and slowly

rearward to pull the door open.

Lifts

Modern lifts have a door edge safety mechanism that, when pushed, reopens the lift door(s).

! If you are in the doorway of a lift when the door(s) begin to close, push on the rubber door edge or allow the rubber

door edge to contact the power chair and the door will reopen.

! Use care that handbags, packages or power chair accessories do not become caught in lift doors.

Lift/Elevation Products

If you will be traveling with your power chair, you may find it necessary to use a lift/elevation product to aid in transporta-

tion. Pride recommends that you closely review the instructions, specifications and safety information set forth by the

manufacturer of the lift/elevation product before using that product.

WARNING! Never sit on your power chair when it is being used in connection with any

type of lift/elevation product. Your power chair was not designed with such use in

mind and any damage or injury incurred from such use is not the responsibility of

Pride.

Motor Vehicle Transport

Pride recommends that you do not remain seated in your power chair while traveling in a motor vehicle. The power chair

should be stowed in the boot of a car or in the back of a truck or van with batteries removed and properly secured.

WARNING! Do not sit on your power chair while it is in a moving vehicle.

WARNING! Always be sure your power chair and its batteries are properly secured when it is being

transported. Batteries should be secured in an upright position and protective caps should be

installed on the battery terminals. Batteries should not be transported with any flammable or

combustible items.

Positioning Belts

Your authorised Pride Dealer, therapist(s) and other healthcare professionals are responsible for determining your require-

ment for a positioning belt in order to operate your power chair safely. Typically, the positioning belt is not designed for use

as a restraining device in a motor vehicle.

Positioning belts should be installed as detailed in this manual. See V. “Comfort Adjustments.” Once installed, the belt

should be placed across the pelvis as determined by the user’s healthcare dealer. Anchor points of the positioning belts

should be located so that a projected side-view angle of the pelvis is between 30°–75° of horizontal depending on the

user’s weight, posture and seat cushion thickness.

WARNING! If you require a positioning belt to safely operate your power chair, make sure it is

fastened securely in order to reduce the possibility of a fall from the power chair.

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle.

14 www.quantumrehab.com Quantum 610

II. SAFETY

Batteries

In addition to following the warnings below, be sure to comply with all other battery handling information. For more

information about your power chair’s batteries, see VI. “Batteries and Charging.”

MANDATORY! Battery posts, terminals and related accessories contain lead and lead

compounds. Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Power chair batteries are heavy. See specifications table. If you are unable

to lift that much weight, be sure to get help. Use proper lifting techniques and avoid

lifting beyond your capacity.

WARNING! Always protect the batteries from freezing and never charge a frozen battery.

Charging a frozen battery may result in damage to the battery.

WARNING! Connect your battery harnesses in the proper manner. RED (+) cables must

be connected to positive (+) battery terminals/posts. BLACK (-) cables must be

connected to negative (-) battery terminals/posts. Protective caps should be installed

over all battery terminals. REPLACE cables immediately if damaged.

Removable Parts

WARNING! Do not attempt to lift or move a power chair by any of its removable parts, including the

armrests, seat, foot riggings, controller and shrouds.

Preventing Unintended Movement

WARNING! If you anticipate being seated in a stationary position for an extended period of time,

turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This

will also eliminate the possibility of unintended chair movement from electromagnetic (EM) sources.

Reaching and Bending

Never reach, lean or bend while driving your power chair. If it is absolutely necessary to reach, lean or bend while seated

on your power chair, it is important to maintain a stable centre of gravity and keep the power chair from tipping. Pride

recommends that the power chair user determine his/her personal limitations and practice bending and reaching in the

presence of a qualified healthcare professional.

WARNING! Do not bend, lean or reach for objects if you have to pick them up from the

floor by reaching down between your knees or if you have to reach over the back of

the seat. Movements such as these may change your centre of gravity and the weight

distribution of the power chair, possibly causing your power chair to tip.

WARNING! Keep your hands away from the tyres when driving. Be aware that loose

fitting clothing can become caught in drive tyres.

Quantum 610 www.quantumrehab.com 15

Transfers

Transferring onto and off of your power chair requires a good

sense of balance. Always have an attendant or healthcare pro-

fessional present while learning to properly transfer yourself.

To eliminate the possibility of injury, Pride recommends that

you or a trained attendant perform the following tasks before

attempting a transfer:

! Turn off the power to the controller.

! Ensure your power chair is not in freewheel mode. See

III. “Your Power Chair.”

! Turn the castor wheels toward the transfer destination to

improve power chair stability during transfer.

! Make sure both armrests are flipped up or removed from

your power chair.

! Flip up the foot platform or move the leg rests aside; this

will help to keep your feet from getting caught on the foot

rigging during the transfer.

! Reduce the distance between your power chair and the

object you are transferring onto.

II. SAFETY

WARNING! Before transferring, position yourself as far back as possible in the power chair seat

to prevent the power chair from tipping forward during transfer.

WARNING! Avoid putting all of your weight on the power chair armrests and do not use the armrests

for weight bearing purposes, such as transfers. Such use may cause the power chair to tip, resulting

in a fall from the power chair and personal injury.

WARNING! Avoid putting all of your weight on the foot riggings. Such use may cause the power

chair to tip.

User Positioning

Pride recommends that all users be seated in an upright position with their pelvis positioned as far rearward as possible in the

power chair seat. All users need to discuss pelvic positioning with their Quantum Rehab Specialist, therapist(s) or healthcare

professional to determine appropriate pelvic position when seated on the power chair based on the user’s individual medical needs.

Prescription Drugs/Physical Limitations

Users must exercise care and common sense when operating a power chair. This includes awareness of safety issues when

taking prescribed or over-the-counter drugs or when the user has specific physical limitations.

WARNING! Consult your physician if you are taking prescribed or over-the-counter medication or

if you have certain physical limitations. Some medications and limitations may impair your ability

to operate your power chair in a safe manner.

Figure 4. Ideal Transfer Position

16 www.quantumrehab.com Quantum 610

Alcohol/Smoking

The power chair user must exercise care and common sense when operating his/her power chair. This includes awareness

of safety issues while under the influence of alcohol or while smoking.

WARNING! Do not operate your power chair while you are under the influence of alcohol, as this

may impair your ability to operate your power chair in a safe manner.

WARNING! Pride strongly recommends that you do not smoke cigarettes while seated in your

power chair, although the power chair has passed the necessary testing requirements for cigarette

smoking. You must adhere to the following safety guidelines if you decide to smoke cigarettes

while seated in your power chair.

! Do not leave lit cigarettes unattended.

! Keep ashtrays a safe distance from the seat cushions.

! Always make sure cigarettes are completely extinguished before disposal.

Electromagnetic and Radio Frequency Interference (EMI/RFI)

WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can

have an adverse affect on the performance of electrically-powered mobility vehicles.

Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-way

radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links,

microwave signals, paging transmitters and medium-range mobile transceivers used by emergency vehicles. In some cases,

these waves can cause unintended movement or damage to the control system. Every electrically-powered mobility vehicle

has an immunity (or resistance) to EMI. The higher the immunity level, the greater the protection against EMI. This product

has been tested and has passed at an immunity level of 20 V/m.

WARNING! Be aware that cell phones, two-way radios, laptops and other types of radio transmitters

may cause unintended movement of your electrically-powered mobility vehicle due to EMI.

Exercise caution when using any of these items while operating your mobility vehicle and avoid

coming into close proximity of radio and TV stations.

WARNING! The addition of accessories or components to the electrically-powered mobility vehicle

can increase the susceptibility of the vehicle to EMI. Do not modify your power chair in any way

not authorised by Pride.

WARNING! The electrically-powered mobility vehicle itself can disturb the performance of other

electrical devices located nearby, such as alarm systems.

NOTE: For further information on EMI/RFI, go to the Resource Center on www.pridemobility.com. If

unintended motion or brake release occurs, turn your power chair off as soon as it is safe to do so. Contact

your Quantum Rehab Specialist to report the incident.

II. SAFETY

Quantum 610 www.quantumrehab.com 17

III. YOUR POWER CHAIR

THE QUANTUM 610

The Quantum 610 has two main assemblies: the seat assembly and the power base assembly. See figure 5. Typically, the

seat assembly includes the armrests, seatback and seat base. The power base assembly includes two motor/brake assem-

blies, two drive wheels, four castor wheels, two batteries and wiring harnesses. See figure 5, 6, and 7.

SEATBACK

REAR

SHROUD

DRIVE WHEEL

CASTOR WHEEL

Figure 5. The Quantum 610

POWER BASE

ASSEMBLY

SEAT ASSEMBLY

FOOT RIGGING

(FOOT PLATFORM SHOWN)

SEAT BASE

ARMRESTS

CONTROLLER

CASTOR WHEEL

18 www.quantumrehab.com Quantum 610

III. YOUR POWER CHAIR

Electrical Components

The electrical components are located inside the power base. The main circuit breaker is located on the front of the battery

tray. The controller connector(s) are located inside the power base. See figure 7.

Motor Connectors: This is where the controller connects to the motors.

Battery Connector: This is where the controller connects to the batteries.

Controller Connector: This is where the controller connects to the power base. Each controller uses a different type of

cable. Regardless of which type of controller is used, the cable must be secured to the seat assembly and not allowed to

drag on the floor.

Figure 6. The Quantum 610 Power Base

MOTOR/BRAKE ASSEMBLY

REAR SHROUD FASTENERS

TRAPEZE BARS

FRONT COVER

Quantum 610 www.quantumrehab.com 19

III. YOUR POWER CHAIR

Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the

motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and

the electronics. If the circuit trips, allow your power chair to “rest” for approximately one minute. Next, push in the circuit

breaker button, turn on the controller and continue normal operation. If the main circuit breaker continues to trip repeat-

edly, contact your Quantum Rehab Specialist.

Figure 7. Quantum 610 Electrical Components

BATTERY

CONNECTOR

MAIN CIRCUIT BREAKER

FLIGHT POWER MODULE

MOTOR

CONNECTORS

CHARGER INHIBIT CONNECTOR

BATTERY

CONNECTOR

VSI CONTROLLER

CONTROLLER CONNECTOR

MOTOR

CONNECTORS

20 www.quantumrehab.com Quantum 610

Manual Freewheel Levers

The Quantum 610 has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive

motors from the gearboxes and manoeuvre the chair manually.

WARNING! Do not use the power chair while the drive motors are disengaged! Do

not disengage the drive motors when the power chair is on an incline or decline, as

the unit could roll on its own! Only engage the freewheel mode when on a level

surface.

WARNING! It is important to remember that when your power chair is in freewheel

mode, the braking system is disengaged.

To engage or disengage the drive motors:

1. Locate the lever on top of each motor.

2. Push the two levers inward to engage the drive motors (drive mode). See figure 8.

3. Pull the two levers outward to disengage the drive motors (freewheel mode). See figure 9.

If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to

the desired position.

WARNING! It is important to remember that when your power chair is in freewheel mode, the

braking system is disengaged.

III. YOUR POWER CHAIR

Figure 9. Freewheel Mode (Drive Disengaged)Figure 8. Drive Mode (Drive Engaged)

MANUAL FREEWHEEL LEVER

Page is loading ...

Pride QUANTUM SERIES, Quantum 610 Owner's manual

Related papers

Other documents