AONTOKY Photo Copy Pico Projector Stand Overhead Phone Mount Adjustable Tabletop Teaching Online Monopod for Live Streaming and Baking Crafting Demo and Draw Recording User manual

Type
User manual
User Manual
1. Package List:
A. Stand Bar X1 B. Base X1
C. Phone Clip X1 D. Adapter for Gopro X1
2. How to Install and Adjust:
a. Unfold the Base
b. Removed the Screw under the Stand Bar.
c. Install Stand Bar to Base
Align screw socket under the stand bar to the hole in the Base
and then use the screw removed in step b to fasten them.
d. Adjust the Stand Bar to a desired angle.
Loose the screw and adjust the angle and then fasten it.
e. Adjust the height of the stand bar
Push off the clip and adjust the stand bar to suitable height
and then lock the clip.
f. Install the phone clip by standard 1/4” screw.
g. Adjust the angle of the phone clip by Ball Head.
h. Finish
Please Note: The angel and height Depends on weight of the
device. Heavier of the device, smaller angle of the stand
Any problem, please kindly to contact us. We will try best to
assist you.
Thank You.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

AONTOKY Photo Copy Pico Projector Stand Overhead Phone Mount Adjustable Tabletop Teaching Online Monopod for Live Streaming and Baking Crafting Demo and Draw Recording User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI