August MR250 User manual
- Category
- Bluetooth music receivers
- Type
- User manual
August MR250 is a Bluetooth transmitter that allows you to stream audio from your non-Bluetooth devices to your Bluetooth headphones or speakers. It features a standard 3.5mm audio-in socket, built-in rechargeable battery, and a range of up to 10 meters. With up to 9 hours of working time and a charging time of about 2 hours, you can enjoy your favorite audio content wirelessly for extended periods. It supports Bluetooth version 2.1+EDR and various Bluetooth profiles, including A2DP, HSPP, HFP, OPP, OBEX, and DUN.
August MR250 is a Bluetooth transmitter that allows you to stream audio from your non-Bluetooth devices to your Bluetooth headphones or speakers. It features a standard 3.5mm audio-in socket, built-in rechargeable battery, and a range of up to 10 meters. With up to 9 hours of working time and a charging time of about 2 hours, you can enjoy your favorite audio content wirelessly for extended periods. It supports Bluetooth version 2.1+EDR and various Bluetooth profiles, including A2DP, HSPP, HFP, OPP, OBEX, and DUN.
August International Ltd
United Kingdom
Telephone: +44 (0)845 250 0586
www.augustint.com
T
r
a
n
sm
ett
eur B
luetoo
t
h
Trasm
et
t
i
to
r
e
B
l
u
eto
ot
h
B
lue
t
oot
h
Trans
mi
t
t
e
r
T
r
a
n
sm
iso
r
Bl
uet
o
oth
Bl
u
et
o
o
th T
r
a
n
sm
itter
MR
250
EN
FR
DE
IT
ES
1. Important Safety Instructions
1) Do not use this device near water.
2) Clean only with a dry cloth. Switch this
product off before cleaning.
3) Do not install near any heat sources such as
stoves or other apparatus that produce heat.
4) Only use the accessories supplied by the
manufacturer.
5) Do not open the device, as this will invalidate
the warranty.
2. Main features
Standard 3.5mm audio–in socket
Built-in rechargeable battery
Distance: up to 10m (class II)
Bluetooth version: 2.1+EDR
Bluetooth profiles: A2DP, HSPP, HFP, OPP,
OBEX, DUN
Working time: up to 9 hours
Charging time: about 2 hours
3. Accessories
1) USB charging cable
2) 3.5mm audio cable
3) User manual
-1-
English
User Manual
Thank you for purchasing the August MR250
Bluetooth Transmitter. This user manual is
designed to familiarize you with all the features
of this device. Please take the time to read this
user manual carefully, even if you are already
familiar with a similar product.
Safety
To ensure the safety of you and others, please read
the Safety Instructions before using this device.
Please do not disassemble the MR250, it can be
unsafe and will invalidate the manufacturer's
warranty.
Disposal
Please ensure the product and accessories are
disposed of in compliance with the WEEE (Waste
Electrical and Electronic Equipment) Directive
and any other regulations applicable to your
country.
Always check with the environment agency and
any other relevant authorities for current disposal
regulations.
Customer Service
You can contact us by phone on: +44 (0)845 250
0586 or by email at: service@augustint.com
should you require further technical support or
customer service.
-2-
-3-
English
MR250
1
3
2
4
AU DIO IN D C 5V
7
6
NO O FF
5
MR250
4. Device Layout
1) Operation button
2) Blue status LED
3) Red status LED
4) Power LED
5) Power switch
6) Power socket
7) Audio in socket
5. Connection
6. Operation
Turn on/off the power switch on/off the device.
Once switching on the device, the power LED
lights blue.
6.1 Switch on/off
The device will be in standby mode after
switching on the device. Press and hold the
operation button until the blue status LED flashes
to enter working mode.
6.2 Working / Standby mode
In working mode, the MR250 will automatically
reconnect to the last paired device if it is
available.
Press and hold the operation button until the red
status LED lights red for 1 second to enter
standby mode.
1) In Standby mode, press and hold operation
button until blue and red status flash in turn to
enter pairing mode.
2) Turn on the Bluetooth on your Bluetooth audio
device, and enter pairing mode.
3) MR250 will pair to your device automatically.
4) Once successfully paired, only blue status LED
flashes.
Note:
1. MR250 will pair to any Bluetooth audio device
in pairing mode within the range, please make
sure only the desired device is in pairing mode.
2. To pair to a new device, please disconnect the
current Bluetooth connection on your device
first, then repeat step 1 to 2 in section 6.3.
6.3. Bluetooth connection
7. Charging
Connect the MR250 to a power USB port by using
the provided USB charging cable.
While charging, the power LED will lights red
and go off once the battery is fully charged.
8. Specifications
Bluetooth version 2.1+EDR
Bluetooth profile
Operating range
Power input
Internal battery
Working current
Standby current
Working time
Charging time
A2DP, HSPP, HFP, OPP, OBEX, DUN
Up to 10m
DC 5V
3.7V/ 250mA Li-polymer battery
0.2mA
Up to 9 hours
About 2 hours
-4-
-5-
English
Please make sure your Bluetooth audio device
is within 10 meters from the MR250.
Please make sure there is only your Bluetooth
audio device in pairing mode within 10 meters
from the MR250.
Please check if the Bluetooth audio device is
connecting to MR250 via Bluetooth.
Please check the cable connection between
your source device and MR250.
Please check the volume on both source device
and your Bluetooth audio device.
There is no sound from my Bluetooth audio
device
3.7V/30mA
Dimension
Weight
70x45x10mm
33g
9. Troubleshooting
Please turn on the power switch.
Please charge the battery.
The device cannot be turned on
Press and hold the operation button in standby
mode to enter pairing mode. The blue and red
status LEDs should flash alternatively. See 6.3.
Please make sure your Bluetooth audio device
is also in pairing mode.
The MR250 cannot pair with my Bluetooth
audio device
10. Warranty
This product is guaranteed for twelve months from
the date of the original purchase. In the unlikely
event of any defect arising due to faulty materials
or workmanship, the unit will be either replaced or
repaired free of charge (where possible) during this
period. An alternative product will be offered in
case the product is no longer available or
repairable.
This warranty is subject to the following
conditions:
The warranty is only valid within the country
where the product is purchased.
The product must be correctly installed and
operated in accordance to the instructions given
in this user manual.
The product must be used solely for domestic
purposes.
The warranty only covers the main unit, and
does not cover the accessories.
The warranty does not cover the damage caused
by misuse, negligence, accident and natural
disaster.
The warranty will be rendered invalid if the
product is resold or has been damaged by
inexpert repairs. The manufactures disclaim any
liability for incidental or consequential damages.
Please consult our customer adviser before
returning any product; we are not responsible for
any unexpected product returns.
Any fa ulty product must be kept and returned
in the original packaging with all the
accessories and the original copy of the
purchase receipt.
The warranty is in addition to, and does not
diminish, your statutory or legal rights.
Customer Service:
Telephone: +44 (0) 845 250 0586
Email: service@augustint.com
-6-
-7-
English
Please keep this card together with the serial number
below in a safe place. You will need to refer to this
card to validate the warranty.
Veillez à garder cette carte ainsi que le numéro de
série ci-dessous dans un endroit sûr. Il vous faudra
cette carte afin de faire valoir la garantie du produit.
Bitte bewahren Sie diese Karte zusammen mit der
Seriennummer an einem sicheren Ort auf. Sie
benötigen diese zum Nachweis der Garantie.
Si prega di tenere questo certificato in un luogo
sicuro. Sarà necessario farne riferimento per
convalidare la garanzia.
Por favor, conserve esta tarjeta junto al número de
serie de debajo en un lugar seguro. Esta tarjeta es
necesaria para validar la garantía del producto.
Warranty Card / Carte de Garantie /
Garantiekarte / Certificato di Garanzia /
Garantía
EN
FR
DE
IT
ES
-
1
-
2
-
3
-
4
-
5
-
6
August MR250 User manual
- Category
- Bluetooth music receivers
- Type
- User manual
August MR250 is a Bluetooth transmitter that allows you to stream audio from your non-Bluetooth devices to your Bluetooth headphones or speakers. It features a standard 3.5mm audio-in socket, built-in rechargeable battery, and a range of up to 10 meters. With up to 9 hours of working time and a charging time of about 2 hours, you can enjoy your favorite audio content wirelessly for extended periods. It supports Bluetooth version 2.1+EDR and various Bluetooth profiles, including A2DP, HSPP, HFP, OPP, OBEX, and DUN.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Binatone MR250 Plus User manual
-
Knoll MA250 Operating instructions
-
Fisher & Paykel MR810 User manual
-
Panasonic MiniDisc Player SJ-MR250 User manual
-
Align RM42501XT / RM42503XT Owner's manual
-
ACOMAX MICRO CASQUE SLIM ADAPTATEUR BLUETOOTH® Owner's manual
-
ACOMAX MICRO CASQUE ADAPTATEUR BLUETOOTH POUR IPOD - KIT BLUETOOTHIPOD Owner's manual
-
Optoma BE6I-GOLD User manual
-
CnMemory BTH-002 User manual
-
Blueant Multimedia PC User manual
