Quick Guide
Fixed Dome IP Camera
ALC-9351/9352
Connect all the necessary I/O follow
the hardware installation guide.
5
Turn on the power of the PC and hub.
Turn on the power.
6
Prepare the product, your PC and
switch hub ready for connection.
1
Connect the product to the power
source (as shown in the figure).
2
Connect the product to the power source (as
shown in the figure).The product can operate
on AC24V. Please connect with your power
adaptor directly.
Connect the product to the switch
hub (as shown in the figure).
3
Use a network cable and plug it in the LAN port
of the product. Plug the other end of the cable in
the LAN port of the hub.
Connect the switch hub to your PC
(as shown in the figure).
4
Step
Connect the product to the switch hub and PC.
Connection diagram
Prepare the product, your PC and switch hub
ready for connection.Make sure that your PC
has a LAN port available for connection to the
network cable of the product.
ɓ
power
Attention
1. Please refer to user manual for more detailed
explanation of the hardware installation.
2. Where no switch hub is available, you can search and .
set up the camera using the network peering approach.
However, you may need a jumper and need to change
the LAN configuration on your PC for this purpose. It is
recommended to request a qualified engineer for the
connection or execute the network peering referring to
the user's manual
ɓ
High dB alarm
ɓ
!
IR Infrared receiver
ɓ
!
Alarm
ɓ
MIC
ɓ
!
HUB
ɓ
Power
ɓ
Speaker
ɓ
DC out (3V)
ɓ
!
PC
ɓ!
HUB
ɓ!
HUB
Step
Execute the IP Finder.exe file from the supplied CD.
Start
1
1
Search for the product from your LAN. The factory
IP setting 192.168.0.20 appears on the screen.
Find the camera (Search)
2
Ļ
ɓ!
Click Search to find the
IP CAM on the LAN
.
Confirmation
5
When all changes have been confirmed, click
“Exit” to quit.
Ļ
ɓ
When all changes have been
confirmed, click
Exit to quit.
Step
https://addons.mozilla.org/en-US/firefox/addon/1419vu8 y930.
2
If you are using Firefox, please download
and install the IE Tab kit first from
When you find the camera, click it and the settings
appear on the right side. Change the settings for the
new network environment you need.
3
Changing the IP address and related
settings for the network environment
Ļ
ɓ!
Enter the settings for the new
network environment you need.
§ You must enter new settings in the IP, Netmask and Gateway
fields and keep the settings in other fields unchanged.
1
This product supports IE 6.0 or above.
Camera settings
Change the Internet
Explorer settings
Note:
If this software cannot run successfully, check that it is
not blocked by an anti-virus software or firewall.
Submit data (Submit)
4
Click “Submit” to validate new settings.
Ļ
ɓ!
Click Submit to validate
new settings.
Open the IE browser
ʔ
Tools
ʔ
!Internet Options
ʔ
Security
!ʔ
Custom Level
Steps
This product uses ActiveX Control to play images and sound
on your PC. The ActiveX Control application software will be
downloaded to your PC when you connect it to the Internet.
To ensure successful download of the software, the Internet
Explorer "security settings" must be changed accordingly.
Make sure that the security level is set to Medium, the
commonly used default security level.
ɓ!
Check that the security
level is Medium.
Check the security setting
An additional option will appear
after the package is successfully
installed. Left click the button
(option) to run IE webpage
simulation.
Ļ
ɓ!
Install IE Tab.
Ļ
ɓ!
Restart Firefox.
Ļ
ɓ!
IE Tab online learning.
Open the IE browser and key in the IP
address of the product.
1
Step
Enter the Main Page
Enter the new IP address and
key in the username “root” and password “root”.
Key in the default “username” and “password”.
Default User Name: root
Default Password: root
You can access the camera as an administrator by default
and set up for other users or privileges from the
“Basic Settings” -> “User”.
Ļ
ɓ!
When the login screen appears,
key in
root in the User Name
and Password fields.
Click OK
Enter the IP address and login
2
Step
Install Internet
Explorer ad-hoc
components
Key in the IP address of the camera
Camera login screen
When the username and password are confirmed, a
control setup screen pops up under the IE address bar.
Click “Install ActiveX Control” to install the controls.
Install ActiveX
1
ɓ!
Click Install ActiveX Control
When installation of the ActiveX control
is completed, the image transmitted from
the camera and the operation interface
appear on the screen.
4
When ActiveX Control is installed successfully, you
can see the camera image and interface.
Ļ
ɓ!
Click Unblock
If a firewall block window pops up,
select Unblock.
3
ɓ!
Click Install
The security warning screen aps.
Click Install.
2
The ActiveX Control is named ActiveX Control.
This software is well certified. You can use it without
any doubts on its validity.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Shenzhen Foscam Intelligent FI8905W User manual
-
Foscam FI8916W-B User manual
-
Foscam FI8916W User manual
-
Shenzhen Foscam Intelligent FI8903W User manual
-
Foscam FI8918W User manual
-
-
-
Asante Technologies Voyager II User manual
-
Costar CDIH200F Owner's manual
-
Pyle PIPCAM15 User manual
