Apex Toys AM08S User manual

Type
User manual

This manual is also suitable for

Apex Toys)
2
Manaual
The important parameters
12.4G Remote control distance is more than 30 meters
2Pull the transmitter out and enter the sleep time: 10 seconds.
3Usage duration: more than 10 hours
4Static Battery when it sleep: below 0.1mA
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Apex Toys)
3
Block diagram
Product Features:
This product can be connected with the mobile phone to control the toy plane
Product main components
80MAH li-polymer
battery
Master MCU, with a
sleep function
3.5 mm plug Audio signal
2.4G
Transmitting
module
Power Light
Charge system
Apex Toys)
4
1. The upper body of transmitter
2. The red light
3. The bottom body of transmitter
4. Charger hole
5. 3.5mm Audio plug
6. PCBA
8. 2.4G transmitting module
7. Master MCU
Apex Toys)
5
2.4G Audio transmitter function light description
NO. Name Material Color Requirements
1
The upper body
of transmitter
30%PC+ABS
Black/White
Injection& Sink printing
2 Power light
Red
Soft and Not dazzling
3
The bottom body
of transmitter
30%PC+ABS
Black/White
Injection&
Sink printing
4 Charger hole
Black
DC Seat
5
3.5mm audio
plug
Nickel-plated Standard mobile phones
with 3.5mm four plug
section
6 PCBA FR-4
White word & Green
oil
HAL
7 Master MCU
Black
8
2.4G transmitting
module
White word & Green
oil
HAL
9 Battery
80MAH li-polymer
battery
10 Antenna Copper
White
11
Transparent hold
LED
ABS
Transparent
9. Battery
11. Transparent hold LED
10. Antenna
Apex Toys)
6
The internal assembly structure
Function Description Function
light
Color
Functioning Pattern The status of the lamp
Successful connection
on the phone
Flashing slowly, 1/second
2.4G connected
successfully
Often Bright state
Sleep Light off
Indicator
Light
Red
No connected Light off
The internal
assembly structure
Apex Toys)
7
The upper body of transmitter
The bottom body of transmitter
Apex Toys)
8
2.4G
Audio transmitter matching process
Switch on the Helicopter
The LED lamp is flashing.
To insert the 2.4 audio transmitter into mobile phone
Enter the corresponding control software
Push the ON/OFF on the software to the ON file, Then the 2.4G audio
transmitter will paired with Aircraft automatically.
The pairing is successful, the LED light on the 2.4G transmitter will
light up, and the LED light on the plan also will light up.
Operation in the user interface, Then you
can control the toys.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Apex Toys AM08S User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI