2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM710/61

Philips MCM710/61 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM710/61 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MCM710
What’s in the Box?
You should find these items upon opening the box.
FM antenna
Quick start guide
Remote Control
Pull out the plastic
protective sheet
before use.
1
Quick Start Guide
2
User Manual
Quick Start Guide User Manual
MCM710 QSG_Eng 2008.4.7, 10:471
Tip
See the User Manual for how to
connect other equipment to this
system.
1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL+/- on the
remote to set the hours.
Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or
press
VOL+/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
1
2
3
Connect the speaker cables.
Connect the FM antenna.
Connect the power cord of the system.
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2
on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
Speaker
(left)
Speaker
(right)
FM antenna
AC power cord
MCM710 QSG_Eng 2008.4.7, 10:472
4
3
2
1
Playing a disc
Press SOURCE on the system to select DISC or press CD on the
remote.
Press ç to open the CD compartment.
Insert a disc with the printed side facing up. Press ç again to close
the compartment.
Playback will start automatically. If not press
ÉÅ.
To stop playback, press
9 .
5
PDCC-FJ/JW-0815
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2008
All rights reserved.
MCM710 QSG_Eng 2008.4.7, 10:473
/