Fhiaba 0H Design Manual

0H
Fhiaba
Brand
Fhiaba
Model
0H
Type
Design Manual
PRODUCT TYPE:
Design Guide
1
2
4
10
28
30
33
34
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
INDEX
1. FHIABA RANGE PRESENTATION
1.1 Fhiaba Collection
1.2 Product code
2. SPACE DESIGN
2.1 Installation types
2.1.1 Flush installation with standard alluminum trims
2.1.2 Prominent installation with standard alluminum trims
2.1.3 Built-In kit
2.1.4 Free standing installation
2.1.5 Installation of two or more appliances
2.1.6 Built-in installation appliances separated by wall or panel
2.1.7 Installation Niche Width for Combinations
3. TECHNICAL DATA AND NICHE DIMENSIONS
3.1 X-Pro series
3.2 StandPlus series
3.3 Country series
3.4 Classic series
3.5 Integrated series
3.6 Brilliance - Classic series
3.7 Brilliance - Integrated series
4. ACCESSORIES
4.1 Free-standing kit (S Integrated and K Classic series)
4.2 Kit Built-In (S Integrated and K Classic series)
4.3 Top grill X-Pro series
5. TECHNICAL INFO
5.1 Electrical and Water connections
5.1.1 Electrical and Water side connections
5.1.2 Electrical and water supply behind the unit
5.1.3 Energy: Alternatives and Home Automation
5.2 Anti - tipping system
6. VENTILATION
6.1 Front plinth and ventilation
7. CUSTOM PANELS
7.1 Panels Dimensions One Bottom - Drawer (1T/0T models)
7.2 Panels DimensionsTwo Bottom - Drawers (0H models)
7.3 Panels Dimensions Column Models (0F models)
7.4 Fixing of custom panels
7.4.1 Decorative panels layout for Fridge with one Bottom-Drawer (1T/0T)
7.4.2 Decorative panels layout for Fridge with two Bottom-Drawers (0H)
7.4.3 Decorative panels layout for Fridge with glass door and one Bottom-Drawer (1T/0T)
7.4.4 Decorative panels layout for Fridge with glass door Brilliance
7.4.5 Decorative panels layout for Fridge with glass door and two Bottom-Drawers (0H)
7.4.6 Decorative panels layout for Fridge Column (0F)
7.4.7 Decorative panels layout for Fridge column with glass door (0F)
7.4.8 Tubolar handles
7.4.9 Maximum cabinet depth over “Integrated” refrigerator with single door panel
2
3
KS
899 0TKS
899
0T
ST
6
i
ST 6 i
X-PRO
CLASSIC
STAND PLUS
COUNTRY
BRILLIANCE
INTEGRATED
XP
M
K
C
B
S
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
1.2 Product code
1. FHIABA RANGE PRESENTATION
1.1 Fhiaba Collection
Fhiaba’s Country Series, with its classic
look of round edges, is available in any
colour and perfectly in classic or rural design
setting. It is available in two generous sizes, the
“750” (75 cm/470 litre total capacity) and “900”
(90 cm/580 litre total capacity) and two different
configurations: OT and 1T.
Fhiaba’s innovative solutions have been
transformed into a smooth, sleek design featuring
fresh aesthetics and tubular stainless steel
handles with a brushed satin finish.
This is the ideal solution to complete your kitchen
design, offering professional refrigeration and a
wine preservation system.
The new Brilliance series presents white painted
aluminum interior walls that in combination
with the powerful LED lighting system, creates
a striking effect and a particularly bright and
brilliant interior.
Available in widths of 90, 75 and 60 cm, all
Brilliance units come equipped with a new
repositionable glass shelf system and adjustable
balconies on a unique rack design.
Our StandPlus series is an iconic style; unmistaka-
ble Italian design combined with contemporary
lines and outfitted with professional features (top-
mount compressors and upper ventilation grille).
Fhiaba’s top of the line range of products enhances
and compliments both classic and modern interiors,
equipping them with a cutting-edge food
preservation system.
Fhiaba developed Integrated series
models are equipped with unique technical
solutions which allow for complete
integration of the product while maintaining
the Fhiaba characteristics of space, functionality
and superior design.
digit # 1-> model series
KS = Classic (bottom compressors, stainless steel front)
MS = StandPlus (top compressors, stainless steel front)
XS = X-Pro (top compressors, stainless steel front)
S = Integrated (bottom compressors, flush or built-in)
BI = Brilliance - Integrated ((bottom compressors, flush or built-in, white interiors)
BKI = Brilliance - Classic (bottom compressors, stainless steel front, white interiors)
A = Country (top compressors, Built-in or Freestanding installation, Custom-colored front and sides, ice maker included)
digit # 2 > width
899 = 90 cm
749 = 75 cm
599 = 60 cm
digit # 3 > model configuration
1T = One door, one bottom drawer, three separate temperatures.
0T = One door, one bottom drawer, two separate temperatures.
0H = One door, two bottom drawers, two separate temperatures.
0F = One door. Fridge and freezer one temperature. Wine cellar two separate temperatures.
digit # 4 > function and door style
ST = Fridge/Trimode, Solid door
GT = Fridge/Trimode, Glass door
WT = Wine Cellar/Trimode
R = Fridge column
Z = Freezer column
W = Wine Cellar column
digit # 6 > hinge positioning
3 = hinge on the left
6 = hinge on the right
digit # 7 > model options
To indicate a unit equipped with Ice Maker -> add “i”
(not available on wine cellar, fridge 599 and 0F column fridge models)
Example:
The X-Pro series, characterised by the upper
ventilation grille and tubular stainless steel
handles, is designed for those who prefer a
professional look. This series reflects the finest
technological features distinctive to all models
in the Fhiaba range.
4
5
A
B
6,5 (¼”)
A
B
6,5 (¼”)
CLASSIC BRILLIANCE
K
B
X-PROSTAND PLUS COUNTRY
XP
M
C
CLASSICBRILLIANCE BRILLIANCEINTEGRATED
K
B
B
S
X-PROSTAND PLUS COUNTRY
XP
M
C
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
2.1.2 Prominent installation with standard alluminum trims
The Lateral Connection Kit (KCLIT/KCLIH/KCL-
MT/KCLMH) is supplied on all models (except in
the unit with stainless steel sides and Country)
and consists of a connection element (A) and a
aluminium frame (B).
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Appliance
Wall or
furniture
2.1.1 Flush installation with standard alluminum trims
2. SPACE DESIGN
The Lateral Connection Kit (KCLIT/KCLIH/KCL-
MT/KCLMH) is supplied on all models (except in
the unit with stainless steel sides and Country)
and consists of a connection element (A) and a
aluminium frame (B).
2.1 Installation types
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Wall or
furniture
Appliance
Wall or
furniture
Wall or
furniture
6
7
21
AA
BC
6,5 (¼”)13 (½”)
610 (24”)
25 (1”)
20 (
¾”
)
15 (
5⁄8”
)
10 (
3⁄8”
)
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
2.1.5 Installation of two or more appliances
Wall or
furniture
Wall or
furniture
Wall or
furniture
1
Central connection kit
2
Lateral connection kit
The Central Connection Kit
1
(KCCIT/KCCIH/KC-
CMT/KCCMH) must be ordered separately, consists
of two connection brackets (A) and a central alumi-
nium frame (C).
The Lateral Connection Kit
2
(KCLIT/KCLIH/KCL-
MT/KCLMH) is supplied on all models (except in the
unit with stainless steel sides and Country) and con-
sists of a connection element (A) and a aluminium
frame (B).
2.1.3 Built-In kit
2.1.4 Free standing installation
Niche 610 mm (24” in)
For the free standing installation ordered the stainless steel sides.
The sides will be pre-installed directly in the factory and are no more removed.
Wall or
furniture
Wall or
furniture
2. SPACE DESIGN
Appliance
Appliance
Appliance Appliance
Appliance Appliance Appliance
8
9
B
B
AA
C
6,5 (¼”)
6,5 (¼”)6,5 (¼”)
6,5 (¼”)
20 (¾”)
20 (¾”)
18 (¾”)
13 (½”)
899+599 6,5 (1/4”) 887 (35”) 13 (1/2”) 587 (23 1/8”) 6,5 (1/4”) 1500 (59”)
899+749 6,5 (1/4”) 887 (35”) 13 (1/2”) 737 (29”) 6,5 (1/4”) 1650 (65”)
899+899 6,5 (1/4”) 887 (35”) 13 (1/2”) 887 (35”) 6,5 (1/4”) 1800 (70”)
749+599 6,5 (1/4”) 737 (29”) 13 (1/2”) 587 (23 1/8”) 6,5 (1/4”) 1350 (53 1/8”)
749+749 6,5 (1/4”) 737 (29”) 13 (1/2”) 737 (29”) 6,5 (1/4”) 1500 (59”)
599+599 6,5 (1/4”) 587 (23 1/8”) 13 (1/2”) 587 (23 1/8”) 6,5 (1/4”) 1200 (47 1/4”)
899+599+599 6,5 (1/4”) 887 (35”) 13 (1/2”)x2 587 (23 1/8”)x2 6,5 (1/4”) 2100 (82 5/8”)
749+749+899 6,5 (1/4”) 737 (29”)x2 13 (1/2”)x2 887 (35”) 6,5 (1/4”) 2400 (94 1/2”)
A
B
6,5 (¼”)
6,5 (¼”)
A
B
6,5 (¼”)
A
B
EE
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
2.1.7 Installation Niche Width for Combinations
Combination
Lateral
Connecting
Framing Kit
Unit
Joining
Kit
Unit
Lateral
Connecting
Framing Kit
Total
Niche
In order to calculate the total niche dimension for installation of
two or more appliances, the following elements are to be consi-
dered:
· Lateral connecting kit (6,5 mm - 1/4” in)
· Central connecting kit (13 mm - 1/2” in)
· Lateral connecting kit (6,5 mm - 1/4” in)
The joining kit is positioned between two units to secure them
together.
The following table givesa few examples:
Appliance Appliance
Wall or
furniture
Wall or
furniture
A Connecting element
B Aluminium frame
C Anti-condensation panel
2. SPACE DESIGN
2.1.6 Built-in installation appliances separated by wall or panel
If the design of the kitchen unit provides for the installation of two
adjacent appliances, but separated by an in-between panel (or wall or
cavity) of a thickness below 16 cm (6 1/4 in), then the installation can
be done as it were two single installations. It is required, however,
that an anticondensation panel (KAC16) is placed on the facing sides
of the appliances. If the in-between panel (or wall or cavity) has a
thickness higher than 16 cm (6 1/4 in) then this precaution is not
required.
A Connecting element
B Aluminium frame
E Anti-condensation panel
A Connecting element
B Aluminium frame
Wall or
furniture
Wall or
furniture
Wall or
panel
Wall or
panel
Wall or
furniture
Appliance Appliance
ApplianceApplianceAppliance
10
11
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
min 2134 (84”)
XS899: 900 (35 ½”)
XS599: 600 (23 ¾”)
XS749: 750 (29 ⅝”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 ⅛”)+25 (1”)
2120 (83 ½”) +25 (1”)
635 (25”)
693 (27 ¼”)
516 (20 ⅜”)
1296 (50”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
560 (22”)
635 (25”)
693 (27 ¼”)
749 (29 ½”) + 25 (1”)
1170 (46”)343 (13 ½”)293
(11 ½”)
6 ( ¼”)
1T/0T
0H
97 (3 ⅞”)
+ 25 (1”)
97 (3 ⅞”)
+ 25 (1”)
min 10 (⅜”)
min 50 (2”)
1016 (40”)
XS899: 1470 (57 ⅞”)
XS749: 1320 (52”)
XS599: 1170 (46”)
560 (22”)
75 (3”)
XS899: 899 (35 ⅝”)
XS749: 749 (29 ½”)
XS599: 599 (23 ⅝”)
10 (⅜”)
58 (2 ¼”)
105°
635 (25”)
XS899: 230 (9”)
XS749: 195 (7 ¾”)
XS599: 160 (6 ¼”)
A
E
W
2134 mm (84”)
XS899: 900 mm (35 ½”)
XS749: 750 mm (29 5/8”)
XS599: 600 mm (23 3/4”)
XS899: 1470 mm (57 7/8”)
XS749: 1320 mm (52”)
XS599: 1170 mm (46”)
105°
XS899: 899 mm (35 3/8”)
XS749: 749 mm (29 1/2”)
XS599: 599 mm (23 5/8”)
2120 mm (83 1/2”) + 25 mm (1”)
635 mm (25 ”)
XS899: 230 mm (9”)
XS749: 195 mm (7 3/4”)
XS599: 160 mm (6 1/4”)
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
75 (3”)
B
C
A
635 (25”)
97 (3 ⅞”)
+ 25 (1”)
2120 (83 ½”) +25 (1”)
> 2134 (84”)
> 650 (25 5/8”)
XP
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
Important: If the units are to be installed inside a ni-
che or within an enclosed structure, it is necessary to
design a ventilation shaft at the back of the niche to
assure proper ventilation at the back of the unit.
3.1.2 Installation niche features
3. TECHNICAL DATA AND NICHE DIMENSIONS
3.1 X-Pro series
3.1.1 Niche dimensions
Niche Width A
Unit Width B
Unit Width with lateral frames C
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2120 mm (83 1/2” in)
12
13
A
E
W
2134 mm (84”)
MS899: 900 mm (35 ½”)
MS749: 750 mm (29 5/8”)
MS599: 600 mm (23 3/4”)
MS899: 1470 mm (57 7/8”)
MS749: 1320 mm (52”)
MS599: 1170 mm (46”)
105°
MS899: 899 mm (35 3/8”)
MS749: 749 mm (29 1/2”)
MS599: 599 mm (23 5/8”)
2120 mm (83 1/2”) + 25 mm (1”)
629 mm (24 3/4”)
MS899: 230 mm (9”)
MS749: 195 mm (7 3/4”)
MS599: 160 mm (6 1/4”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
min 2134 (84”)
MS899: 900 (35 ½”)
MS599: 600 (23 ¾”)
MS749: 750 (29 ⅝”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 ⅛”)+25 (1”)
629 (24 ¾”)
615 (24 ¼”)
629 (24 ¾”)
615 (24 ¼”)
1T/0T
2120 (83 ½”) +25 (1”)
0H
666 (26 ¼”)
485 (19 ⅛”)
1296 (50”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
128 (5)
+ 25 (1”)
128 (5)
+ 25 (1”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
560 (22”)
666 (26 ¼”)
1170 (46”)
343
(13 ½”)
262
(10 ¼”)
6 ( ¼”)
749 (29 ½”) + 25 (1”)
105°
1010 (39 ¾”)
560 (22”)
MS899: 899 (35 ⅜”)
MS749: 749 (29 ½”)
MS599: 599 (23 ⅝”)
10 (⅜”)
629 (24 ¾”)
37 (1 ½”)
69 (2 ¾”)
MS899: 1470 (57 ⅞”)
MS749: 1320 (52”
)
MS599: 1170 (46”
)
MS899: 230 (9”)
MS749: 195 (7 ¾”)
MS599: 160 (6 ¼”)
)
min 50 (2”)
69 (2 3/4”)
B
A
629 (24 3/4”)
128 (5)
+ 25 (1”)
2120 (83 ½”) +25 (1”)
> 2134 (84”)
> 650 (25 5/8”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
M
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
Important: If the units are to be installed inside a ni-
che or within an enclosed structure, it is necessary to
design a ventilation shaft at the back of the niche to
assure proper ventilation at the back of the unit.
3.2.2 Installation niche features
3.2 StandPlus series
3.2.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2120 mm (83 1/2” in)
3. TECHNICAL DATA AND NICHE DIMENSIONS
Niche Width A
Unit Width B
Unit Width with lateral frames C
14
15
A
E
W
2134 mm (84”)
AS899: 900 mm (35 ½”)
AS749: 750 mm (29 5/8”)
AS599: 600 mm (23 3/4”)
AS899: 1470 mm (57 7/8”)
AS749: 1320 mm (52”)
AS599: 1170 mm (46”)
105°
AS899: 887 mm (35")
AS749: 737 mm (29")
AS599: 587 mm (23 1/8")
2120 mm (83 1/2”) + 25 mm (1”)
635 mm (25 ”)
AS899: 230 mm (9”)
AS749: 195 mm (7 3/4”)
AS599: 160 mm (6 1/4”)
min 10 (⅜”)
min 50 (2”)
105°
1016 (40”)
AS899: 1470 (57 ⅞”)
AS749: 1320 (52”)
AS599: 1170 (46”)
560 (22”)
75 (3”)
AS899: 887 (35”)
AS749: 737 (29”)
AS599: 587 (23 ⅛”)
10 (⅜”)
60 (2 ¼”)
635 (25”)
AS899: 230 (9”)
AS749: 195 (7 ¾”)
AS599: 160 (6 ¼”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
min 2134 (84”)
AS899: 900 (35 ½”)
AS599: 600 (23 ¾”)
AS749: 750 (29 ⅝”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 ⅛”)+25 (1”)
635 (25”)
695 (27 ¼”)
485 (19 ⅛”)
1296 (50”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
1T/0T
128 (5)
+ 25 (1”)
899 749 599
900 mm (35 1/2" in) 750 mm (29 5/8" in) 600 mm (23 3/4" in)
887 mm (35" in) 737 mm (29" in) 587 mm (23 1/8" in)
75 (3”)
B
A
635 (25”)
128 (5)
+ 25 (1”)
2120 (83 ½”) +25 (1”)
> 2134 (84”)
> 650 (25 5/8”)
C
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
Important: If the units are to be installed inside a ni-
che or within an enclosed structure, it is necessary to
design a ventilation shaft at the back of the niche to
assure proper ventilation at the back of the unit.
3.3.2 Installation niche features
3.3 Country series
3.3.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2120 mm (83 1/2” in)
Niche Width A
Unit Width B
3. TECHNICAL DATA AND NICHE DIMENSIONS
16
17
105°
KS899: 1470 (57 ⅞”)
KS749: 1320 (52”)
KS599: 1170 (46”)
560 (22”)
635 (25”)
KS899: 899 (35 ⅜”)
KS749: 749 (29 ½”)
KS599: 599 (23 ⅝”)
10 (⅜”)
75 (3”)
58 (2 ¼”)
KS899: 230 (9”)
KS749: 195 (7 ¾”)
KS599: 160 (6 ¼”)
1016 (40”)
A
E
W
2064 mm (81 1/4”)
KS899: 900 mm (35 ½”)
KS749: 750 mm (29 5/8”)
KS599: 600 mm (23 3/4”)
650 mm (25 5/8”)
KS899: 1470 mm (57 7/8”)
KS749: 1320 mm (52”)
KS599: 1170 mm (46”)
105°
KS899: 899 mm (35 3/8”)
KS749: 749 mm (29 1/2”)
KS599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
635 mm (25”)
KS899: 230 mm (9”)
KS749: 195 mm (7 3/4”)
KS599: 160 mm (6 1/4”)
min 2064 (81 ¼”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
KS899: 900 (35 ½”)
KS599: 600 (23 ¾”)
KS749: 750 (29 ⅝”)
635 (25”)
560 (22”)
1T/0T
693 (27 ¼”)
2050 (80 ¾”) +25 (1”)
1308 (51 ½”)587 (23 ⅛”)
146 (5 ¾”)
+ 25(1”)
146 (5
¾”)
+ 25(1”)
9 ( ⅜”)
732 (28 ⅞”)+25 (1”)
0H
635 (25”)
560 (22”)
693 (27 ¼”)
2050 (80 ¾”) +25 (1”)
857 (33 ¾”) +25 (1”)
1185 (46 ⅝”)
342
(13 ½”)
362
(14 ¼”)
9 ( ⅜”)
6 ( ¼”)
75 (3”)
B
A
635 (25”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 650 (25 5/8”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
K
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.4.2 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
3.4 Classic series
3.4.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
3. TECHNICAL DATA AND NICHE DIMENSIONS
Niche Width A
Unit Width B
Unit Width with lateral frames C
18
19
A
E
W
2064 mm (81 1/4”)
KS899: 900 mm (35 ½”)
KS749: 750 mm (29 5/8”)
KS599: 600 mm (23 3/4”)
650 mm (25 5/8”)
KS899: 1475 mm (58”)
KS749: 1325 mm (52 1/8”)
KS599: 1175 mm (46 1/4”)
105°
KS899: 899 mm (35 3/8”)
KS749: 749 mm (29 1/2”)
KS599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
640 mm (25 1/4”)
KS899: 230 mm (9”)
KS749: 195 mm (7 3/4”)
KS599: 160 mm (6 1/4”)
105°
KS899: 1475 (58”)
KS749: 1325 (52 ⅛”)
KS599: 1175 (46 ¼”)
565 (22 ¼”)
640 (25 ¼”)
KS899: 899 (35 ⅜”)
KS749: 749 (29 ½”)
KS599: 599 (23 ⅝”)
10 (⅜”)
75 (3”)
58 (2 ¼”)
KS899: 230 (9”)
KS749: 195 (7 ¾”)
KS599: 160 (6 ¼”)
1021 (40 ¼”)
min 2064 (81 ¼”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
KS899: 900 (35 ½”)
KS599: 600 (23 ¾”)
KS749: 750 (29 ⅝”)
640 (25 ¼” )
565 (22 ¼” )
0F
698 (27 ½”)
2050 (80 ¾”) +25 (1”)
1904 (75”)
146 (5
¾”)
+ 25(1”)
75 (3”)
B
A
640 (25 ¼”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 650 (25 5/8”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
K
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.4.4 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
3.4 Classic series
3.4.3 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
Niche Width A
Unit Width B
Unit Width with lateral frames C
3. TECHNICAL DATA AND NICHE DIMENSIONS
20
21
105°
992 (39”)
S899: 1470 (57 ⅞”)
S749: 1320 (52”)
S599: 1170 (46”)
560 (22”)
610 (24”)
S899: 899 (35 ⅜”)
S749: 749 (29 ½”)
S599: 599 (23 ⅝”)
10 (⅜”)
S899: 160 (6 ¼”)
S749: 125 (5”)
S599: 90 (3 ½”)
A
E
W
2064 mm (81 1/4”)
S899: 900 mm (35 ½”)
S749: 750 mm (29 5/8”)
S599: 600 mm (23 3/4”)
630 mm (24 3/4”)
S899: 1470 mm (57 7/8”)
S749: 1320 mm (52”)
S599: 1170 mm (46”)
105°
S899: 899 mm (35 3/8”)
S749: 749 mm (29 1/2”)
S599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
610 mm (24”)
S899: 160 mm (6 1/4”)
S749: 125 mm (5”)
S599: 90 mm (3 1/2”)
110 (4 3/8”)
B
A
610 (24”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 630 (24 3/4”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
610 (24”)
560 (22”)
1293 (50 ⅞” )
474
(18 ⅝”)
231 (9
⅛”
) +
25 (1”)
500 (19 ¾”)
248 (9
¾”
)
+ 25 (1”)
20 (¾”)
15 (⅝”)
610 (24”)
560 (22”)
500 (19 ¾”)
231 (9
⅛”
) +
25 (1”)
248 (9
¾”
)
+ 25 (1”)
15 (⅝”)
20 (¾”)10 (⅜”)
1168(46”)
330
(13”)
259
(10
¼”
)
min 2064 (81 ¼”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
S899: 900 (35 ½”)
S599: 600 (23 ¾”)
S749: 750 (29 ⅝”)
721 (28 ⅜”) +25 (1”)
2050 (80 ¾”) +25 (1”)
1T/0T
2050 (80 ¾”) +25 (1”)
846 (33 ¼”) +25 (1”)
0H
S
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.5.2 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth (see 3.5.1)
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door (without panel)
Minimum distance from the wall (hinge side)
3.5 Integrated series
3.5.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
Niche Width A
Unit Width B
Unit Width with lateral frames C
3. TECHNICAL DATA AND NICHE DIMENSIONS
22
23
A
E
W
2064 mm (81 1/4”)
S899: 900 mm (35 ½”)
S749: 750 mm (29 5/8”)
S599: 600 mm (23 3/4”)
630 mm (24 3/4”)
S899: 1475 mm (58”)
S749: 1325 mm (52 1/8”)
S599: 1175 mm (46 1/4”)
105°
S899: 899 mm (35 3/8”)
S749: 749 mm (29 1/2”)
S599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
615 mm (24 1/4”)
S899: 160 mm (6 1/4”)
S749: 125 mm (5”)
S599: 90 mm (3 1/2”)
105°
992 (39 ¼”)
S899: 1475 (58”)
S749: 1325 (52 ⅛”)
S599: 1175 (46 ¼”)
565 (22 ¼”)
615 (24 ¼”)
S899: 899 (35 ⅜”)
S749: 749 (29 ½”)
S599: 599 (23 ⅝”)
10 (⅜”)
S899: 160 (6 ¼”)
S749: 125 (5”)
S599: 90 (3 ½”)
615 (24 ¼” )
565 (22 ¼” )
1808 (71 ¼” )
231 (9
⅛”
) +
25 (1”)
505 (19 ¾”)
233 (9
¼”
)
+ 25 (1”)
15 (⅝”)
2050 (80 ¾”) +25 (1”)
0F
min 2064 (81 ¼”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
S899: 900 (35 ½”)
S599: 600 (23 ¾”)
S749: 750 (29 ⅝”)
110 (4 3/8”)
B
A
615 mm (24 1/4”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 630 (24 3/4”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
S
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.5.4 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth (see 3.5.2)
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door (without panel)
Minimum distance from the wall (hinge side)
3.5 Integrated series
3.5.3 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
Niche Width A
Unit Width B
Unit Width with lateral frames C
3. TECHNICAL DATA AND NICHE DIMENSIONS
24
25
105°
BKI899: 1435 (56 ½”)
BKI749: 1285 (50 ⅝”)
BKI599: 1135 (44 ¾”)
525 (20 ⅝”)
600 (23 ¾”)
BKI899: 899 (35 ⅜”)
BKI749: 749 (29 ½”)
BKI599: 599 (23 ⅝”)
10 (⅜”)
75 (3”)
58 (2 ¼”)
BKI899: 230 (9”)
BKI749: 195 (7 ¾”)
BKI599: 160 (6 ¼”)
A
E
W
2064 mm (81 1/4”)
BKI899: 900 mm (35 ½”)
BKI749: 750 mm (29 5/8”)
BKI599: 600 mm (23 3/4”)
605 mm (23 3/4”)
BKI899: 1435 mm (56 1/2”)
BKI749: 1285 mm (50 5/8”)
BKI599: 1135 mm (44 3/4”)
105°
BKI899: 899 mm (35 3/8”)
BKI749: 749 mm (29 1/2”)
BKI599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
600 mm (23 3/4”)
BKI899: 230 mm (9”)
BKI749: 195 mm (7 3/4”)
BKI599: 160 mm (6 1/4”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
min 2064 (81 ¼”)
BKI899: 900 (35 ½”)
BKI599: 600 (23 ¾”)
BKI749: 750 (29 ⅝”)
600 (23 ¾”)
525 (20 ⅝”)
0T
693 (27 ¼”)
2050 (80 ¾”) +25 (1”)
1308 (51 ½”)587 (23 ⅛”)
146 (5 ¾”)
+ 25(1”)
9 ( ⅜”)
732 (28 ⅞”)+25 (1”)
75 (3”)
B
A
600 (23 3/4”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 605 (23 3/4”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
B
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.6.2 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
Minimum distance from the wall (hinge side)
3.6 Brilliance - Classic series
3.6.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
Niche Width A
Unit Width B
Unit Width with lateral frames C
3. TECHNICAL DATA AND NICHE DIMENSIONS
26
27
105°
947 (37 1/4”)
BI899: 1435 (56 1/2”)
BI749: 1285 (50 5/8”)
BI599: 1135 (44 3/4”)
525 (20 5/8”)
575 (22 5/8”)
BI899: 899 (35 3/8”)
BI749: 749 (29 1/2”)
BI599: 599 (23 5/8”)
10 (⅜”)
BI899: 160 (6 1/4”)
BI749: 125 (5”)
BI599: 90 (3 1/2”)
A
E
W
2064 mm (81 1/4”)
BI899: 900 mm (35 ½”)
BI749: 750 mm (29 5/8”)
BI599: 600 mm (23 3/4”)
580 mm (22 3/4”)
BI899: 1435 mm (56 1/2”)
BI749: 1285 mm (50 5/8”)
BI599: 1135 mm (44 3/4”)
105°
BI899: 899 mm (35 3/8”)
BI749: 749 mm (29 1/2”)
BI599: 599 mm (23 5/8”)
2050 mm (80 3/4”) + 25 mm (1”)
575 mm (22 5/8”)
BI899: 160 mm (6 1/4”)
BI749: 125 mm (5”)
BI599: 90 mm (3 1/2”)
A A
E W E W
140 (5 ½”)140 (5 ½”)
100 (4”)
100 (4”)
min 2064 (81 ¼”)
BI899: 900 (35 ½”)
BI599: 600 (23 ¾”)
BI749: 750 (29 ⅝”)
575 (22 ⅝”)
525 (20 ⅝”)
1293 (50 ⅞” )
474
(18 ⅝”)
231 (9
⅛”
) +
25 (1”)
465 (18 ⅜”)
248 (9
¾”
)
+ 25 (1”)
20 (¾”)
15 (⅝”)
721 (28 ⅜”) +25 (1”)
2050 (80 ¾”) +25 (1”)
0T
110 (4 3/8”)
B
A
575 (22 5/8”)
146 (5 3/4”)
+ 25(1”)
2050 (80 3/4”) +25 (1”)
> 2064 (81 1/4”)
> 580 (22 3/4”)
C
899 749 599
900 mm (35 1/2") 750 mm (29 5/8") 600 mm (23 3/4")
887 mm (35") 737 mm (29") 587 mm (23 1/8")
899 mm (35 1/2’’) 749 mm (29 1/2’’) 599 mm (23 5/8")
B
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
3.7.2 Installation niche features
area to be left clear for the anti-tipping brackets
area to be left clear for the power supply cable
and water supply hose
Minimum Niche Height
Minimum Niche Width
Minimum Niche Depth (see 3.7.1)
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door (without panel)
Minimum distance from the wall (hinge side)
3.7 Brilliance - Integrated series
3.7.1 Niche dimensions
The foots adjustment system allows to increase the height of the
apparatus of 25 mm (1“) than the height of 2050 mm (80 3/4” in)
Niche Width A
Unit Width B
Unit Width with lateral frames C
3. TECHNICAL DATA AND NICHE DIMENSIONS
28
29
M
11 (0,4)
M
19,1 (¾”)
19,1 (¾”)
19,1 (¾”)
16,5 (
5⁄8”
)
11 (3⁄8”)
11 (3⁄8”)
16,5 (
5⁄8”
)
683 (26 7⁄8”
)
25
(1)
65 (2 ½”)
25 (1)
2094 (82 ½”)
899
749
599
950 mm
(37 3/8” in)
800 mm
(31 1/2” in)
650 mm
(25 5/8” in)
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
4.2 Kit Built-In (S Integrated and K Classic series)
4.3 Top grill X-Pro series
The models of the Integrated and Classic series have the opportunity
to be placed one or more built using the Built-In side covers and the
dashboard in stainless steel (code KI00000000), thereby keeping all
in line with the existing structure.
The dashboards are available in different widths for individual instal-
lations and installations for multiple units side by side.
In the case of combination of two units of the X-Pro you can request
the option of the top grill and the front kick plate only up to the maxi-
mum of 180 cm.
You can ask the viability of larger sizes and costs.
M Built-in Connecting element
Wall or
furniture
Wall or
furniture
Appliance
H
H
A
B
A
B
25 (1”) 25 (1”)
6,5 (¼”)6,5 (¼”)
20 (¾”)
20 (¾”)
22 (7⁄8”)
22 (7⁄8”)
22 (7⁄8”)22 (7⁄8”)
Appliance
A Connecting element
B Aluminium frame
H Side panel
Installation side panel
Width
Stainless-Stee
Sides
Series
4. ACCESSORIES
4.1 Free-standing kit (S Integrated and K Classic series)
All models of the Integrated series can be installed as built-in or fre-
estanding, using the free-standing kit (cod. ES00000000) to frame the
single unit or combination of units with an all-stainless steel portal
composed of two side panels and one top.
While the two side panels are available in standard dimension, the top
element can be customized to fit combinations of two or more ele-
ments.
30
31
E
W
E
W
E
W
E
W
EW
E W
EW
E W
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
5.1.1 Electrical and Water side connections
5.1.2 Electrical and water supply behind the unit
5.1.3 Energy: Alternatives and Home Automation
If energy is supplied through an alternative energy power source
(solar, geothermal, etc..) or if home automation systems are installed,
it is necessary to install the Alternative Energy Kit to integrate the
unit into the power grid.
Series: Integrated e Classic Series: StandPlus, X-Pro e Country
5. TECHNICAL INFO
5.1 Electrical and Water connections
Accessories for power supply, earthed plug and cable, are included
with the shipment of the appliance; a separate electric circuit with a
220V AC, 50Hz power supply is required.
Models with Ice Maker or water dispenser must be connected to the
water piping system through the plastic tube supplied with the
appliance. The installation of a water closing valve is recommended
in an easily accessible area allowing closure of the refrigerator circu-
it separately from the general water circuit.
The Ice Maker operates with a water pressure ranging between 2.2
bar and 7.8 bar. Should an independent or centralised water filtering
system be already installed, Fhiaba’s filtering system can be bypas-
sed by removing the filter cartridge.
A Schuko 16 A socket with an efficient grounding should be made
available for the electrical mains connection, as well as an omnipolar
switch which can easily be reached when the appliance is installed.
To connect to the water supply system (for appliances equipped with
ice makers) a tap with a male 3/4” connection should be provided,
which must also be easily accessible once the appliance is installed.
The appliance is provided with a water supply hose and seal kit which
is suitable for high water pressure and complies the Food Regulations.
The water filter cartridge, which is provided with the appliance,
should be installed according to the accompanying instructions.
Use only the new hose and the new gaskets which are supplied with
the appliance. Discard any hose and gasket which may have already
been installed.
Electrical cord length: 2,0 mt (78 3/4”)
Water connection line length: 2,5 mt (98 3/8”)
Series: Integrated e Classic
Back of appliance
Water connection
Electrical connection
Back of appliance
Water connection
Electrical connection
Series: StandPlus, X-Pro e Country
Do not use extension cords or adapters.
Once the appliance has been connected to the water system,
turn the Ice Maker off (touch the button
on control panel to
switch it off) before the main water is shut off.
The appliance should be connected only to a drinkable water sup-
ply system.
The Built-in Fhiaba filter cannot make it safe to drink any wa-
ter which is not suitable for human consumption.
E Electrical cord: 2,0 mt (78 3/4 in)
W Water connection line: 2,5 mt (98 3/8 in)
32
33
A
B
C C
A
860 (33 7⁄8") 740 (29 1⁄8") 560 (22")
min 100 (4")
10 (3⁄8")
min 50%
B
C
899 749 599
100 (4”)
55 (2
1⁄8”
)
75 (3”)
85 (3
3⁄8”
)
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
6. VENTILATION
6.1 Front plinth and ventilation
A forced air system assures ventilation through a grille positioned in
the lower front part of the unit. If the kitchen design includes a
kickplate, the latter has to be punched in order to maintain a satisfac-
tory air flow, as described in the drawing.
Holes can be in any shape and size, as long as the total area of the
punched part equals 50% of the kickplate are.
In this case, to guarantee a better air flow, it is advisable to remove
the front grille included with the unit. The grille is secured to the unit
with magnetic plates and can be easily removed even by the end
user, to provide for regular cleaning procedures and remove dust.
If the grille is partially covered by the kitchen kickplate, it is advisable
to remove the grille in order to provide for a better airflow.
The air intake and outlet must not be blocked or covered in any way.
They also need to be dusted/cleaned on a regular basis.
Ventilation is insured by a forced air system through a grille located
in the upper part of the appliance.
This grille should never be covered by panels or any other devices
that could reduce its efficiency.
Please refer to page 5-6 to ensure correct air circulation.
Series: Integrated e Classic
Series: StandPlus, X-Pro e Country
Standard Anti-Tipping Kit B04000200
5. TECHNICAL INFO
5.2 Anti - tipping system
To prevent the appliance from tipping over, is necessary to install the
supplied “Standard Anti-tipping Kit” which allows the mounting of the
appliance at a maximum distance of 53 mm (2 in) from the rear wall
of the installation area.
If the refrigerator is to be installed within units deeper than 67 cm
(26,3 in), the “Extra Length Anti-tipping Kit” can be ordered (cod.
B04000900) separately, allowing the installation in structures up to
80 cm (31,4 in) deep.
In case of deeper structures a wooden plynth must be used to con-
nect the anti-tipping bracket to the rear wall of the installation area.
34
35
897 (35 1/4”)
627 (24 3/4”)
747 (29 3/8”) 477 (18 3/4”)
597 (23 3/4”) 327 (12 7/8”)
899
749
599
min 325 (12 ¾”)
max 415 (163⁄8”)
337 (13 ¼”)
3 (1⁄8”)
3 (1⁄8”)
1195 (47”)
2050 (80 ¾”)
187 (7 3⁄8”)
min 100 (4”
)
A B
115 (4 ½”)
135
(5 3⁄8”)
135
(5 3⁄8”)
min 130 (5 1⁄8”)
950 (37 3⁄8”)
899
749
599
897 (35 1/4”)
627 (24 3/4”)
747 (29 3/8”) 477 (18 3/4”)
597 (23 3/4”) 327 (12 7/8”)
B
115 (4 ½”)
min 130 (5 1⁄8”)
135
(5 3⁄8”)
135
(5 3⁄8”)
1075 (42 3⁄8”)
2050 (80 ¾”)
min 540 (21 ¼”)
max 635 (25”)
187 (7 3⁄8”)
min 100 (4”
)
A
3 (1⁄8”)
1320 (52”)
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
7.2 Panels DimensionsTwo Bottom - Drawers (0H models)
Door/Drawer
Width A
Series
Door Cutout Width
B
7. CUSTOM PANELS
7.1 Panels Dimensions One Bottom - Drawer (1T/0T models)
Door/Drawer
Width A
Series
Door Cutout Width
B
Panels with width ranging between 18 mm (3/4 in) and 28 mm (1 1/8 in).
Door panels with weight max of 23 kg (51 lb) and drawer panels with weight max of 11kg (25 lb).
Provide installation of decorative panels during installation of the unit.
Panels with width ranging between 18 mm (3/4 in) and 28 mm (1 1/8 in).
Door panels with weight max of 23 kg (51 lb) and drawer panels with weight max of 11kg (25 lb).
Provide installation of decorative panels during installation of the unit.
36
37
899
749
599
897 (35 1/4”)
627 (24 3/4”)
747 (29 3/8”) 477 (18 3/4”)
597 (23 3/4”) 327 (12 7/8”)
min 1863 (73 3⁄8”)
max 1960 (77 1⁄8”)
2050 (80 ¾”)
187 (7
3⁄8”)
min 100 (4”
)
A B
min 161(6 3⁄8”)
max 258 (10 1⁄8”)
135
(5 3⁄8”)
135
(5 3⁄8”)
min 130 (5 1⁄8”)
1572 (62”)
A
BB
A
BB
C C
13 (½”)
34 (1
3⁄8”)
6,5 (
¼”)6,5 (¼”)
34 (1
3⁄8”)
1273 (50 1⁄8”)
1163 (45 ¾”)
660 (26”)
157 (6
¼”)
min 1320 (52”)
max 635 (25”
)
507.5 (20”)
382 (15
1⁄8”)
100 (4”)
EN
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161 www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
7.4 Fixing of custom panels
7.4.1 Decorative panels layout for Fridge with one Bottom-Drawer (1T/0T)
For the application of customised panels to the front of doors and
drawers, Fhiaba has designed a patented system, made up of small
brackets to be attached on the panels, which will be hooked to the
fixings on the fridge door.
Refer to the following picture and table for the positioning of the
brackets on the inside of the panels.
Panels with width ranging between 18 mm (3/4 in) and 28 mm (1 1/8 in).
Door panels with weight max of 34 kg (75 lb).
Provide installation of decorative panels during installation of the unit.
7. CUSTOM PANELS
7.3 Panels Dimensions Column Models (0F models)
Door Width A
Series
Door Cutout Width
B
SERIES 899 SERIES 749 SERIES 599
A 897 (35 1/4”) 747 (29 3/8”) 597 (23 1/2”)
B 417 (16 3/8”) 342 (13 1/2”) 276,5 (10 7/8”)
C 354,5 (14”) 279,5 (11”) 203,5 (8”)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Fhiaba 0H Design Manual

0H
Fhiaba
Brand
Fhiaba
Model
0H
Type
Design Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents