HOLUX M-241 Download and Update
Firmware Operation Procedure (20080325)
[Note]
1. Utility currently only support firmware download through USB cable.
2. Please DO NOT download and update through bluetooth.
3. If the USB cable is disconnected during downloading, please re-download
on the same PC which cable disconnected , in order to recover the device
original Bluetooth Mac Address.
Please refer to the following steps:
(1) Please install USB driver “
CP210x_VCP_Win2K_XP.exe
” in advance.
(2) “
CP210xUSB to UART Bridge Controller
” message will appears on the
Device Manager after USB cable is connected.
) Please double check the USB Cable is connected to PC(see the figure
(3
below)
(4) make sure the device is connected with PC through USB cable and this
COM Port is correct. (Note: Don’t click “Connect” button. Utility will handle
connection automatically.)
(5) Please select the firmware file.
Note the correct firmware file name is *_HLX.bin.
Utility will check firmware integrity before downloading, and if the firmware file
is corrupt, it will cancel downloading.
(6) Click “Download and Update” button to download.
(7) Downloading now. Don’t disconnect USB cable .
[Note]
ans final procedure is
processing , please don’t disconnect the cable. Please wait “Download and
Update Successfully” text appears to complete updating successfully. (see .
figure(5))
When “Process Finish Procedure” text appears, it me
(8) Download and update firmware completed and successfully.
(9) Restart M-241 Device.
Notice: In order to make the new firmware takes effect, please restart M-241
device by the power switch .
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ZyXEL Communications NSA-210 User manual
-
HP 241 G1 Notebook PC User guide
-
Zebra MC18 Product Reference Guide
-
-
CipherLab 8230 Reference guide
-
nComputing M-series M300 User manual
-
-
ATEN CC2000 3.0 User manual
-
Zebra ZD421 Owner's manual
-
