Genaray PX2-RGB User manual

Brand: Genaray

Model: PX2-RGB

Type: User manual

This manual is also suitable for

USER MANUAL

PX1 / 2 / 4

RGB PIXEL TUBE LIGHTS

RGB SERIES

RGB Pixel Tube Lights - USER MANUAL

THANK YOU FOR CHOOSING GENARAY

Genaray’s RGB Pixel Tube Lights are a powerful and versatile

solution for advanced and customizable lighting effects for

studio, ﬁlm, and TV production. Pixel control offers individual

parameter settings for color, width, speed, and grouping. Adjust

a full 360° RGB spectrum, 2800 to 8000 K CCT bicolor, and ﬂow

direction. With wireless Bluetooth control or via DMX, you can

set up dazzling color arrays with multiple lighting effects and

patterns. Create spatial effects that add ambiance with eye-

catching motion.

RGB Pixel Tube Light

RGB Pixel Tube Lights - USER MANUAL 3

· Please read and follow these

instructions, and keep this manual in

a safe place.

· Keep this unit away from water and

any ﬂammable gases or liquids.

· Make sure the unit is powered off

when plugging it into a power source.

· Use only the correct, recommended

voltage.

· Do not attempt to disassemble or

repair the equipment—doing so may

expose you to electric shock and will

void the warranty. Genaray will not be

responsible for any damage.

· Handle the unit with care.

· Do not stare directly at the lights when

they are powered on.

· Keep this product away from children.

· Clean the unit with only a soft, dry

cloth.

· Images are for illustrative purposes

only.

PRECAUTIONS

Precautions

RGB Pixel Tube Lights - USER MANUAL

PRODUCT

OVERVIEW

PX1-RGB

1/4-20 mount

Magnet

USB Type-C

charging port

RGB Pixel Tube Lights - USER MANUAL 5

Product overview

Power socket

DC 24 V charging port

PX2-RGB/PX4-RGB

1/4-20 mount

Side

3-pin mini DMX

input socket

3-pin mini DMX

output socket

RGB Pixel Tube Lights - USER MANUAL

Product overview

Interface

OLED

Mode select button

Setting select button

Increase button

Decrease button

Power button

RGB Pixel Tube Lights - USER MANUAL 7

CONTENTS INCLUDE

PX1RGB

· RGB Pixel Tube light

· USB Type-C to USB Type-A cable

· Wrist strap

· Soft bag

· User manual

PX2RGB / PX4RGB

· RGB Pixel Tube light

· Tripod

· Carrying case

· Power adapter

· User manual

The Genaray RGB Pixel Tube Lights can be

mounted onto any light stand with a 1/4-20

stud, and the models PX2 and PX4 include

a lightweight tripod. The PX1 has built-in

magnets so you can attach the light to any

ferrous metal surface.

MOUNTING THE LIGHT

instructions

RGB Pixel Tube Lights - USER MANUAL

TURNING ON THE

RGB PIXEL TUBE LIGHT

PX1RGB USB TYPEC 5V, 2A

PX2RGB/PX4RGB

DC 24V, 2A POWER ADAPTER

· When the light is powered off, a charging

status icon appears on the screen.

· When the light is powered on, a charging

icon appears in the top right corner of

the screen.

Warning!

When set to full brightness, the RGB Pixel

Tube Lights are powerful. Do not look

directly into the light while it’s turning on.

Press and hold the power button until the

settings are displayed on the LCD and the

light turns on.

To turn the Pixel Tube Light off, press and

hold the power button until the LCD and

light turns off.

CHARGING THE

BATTERY

instructions

RGB Pixel Tube Lights - USER MANUAL 9

USER INTERFACE

CCT: Correlated Color Temperature from

2800 to 8000 K

INT: Intensity from 0% to 100%

G/M: Green/Magenta from -1.00 to +1.00

CCT MODE BICOLOR

1. Mode

2. Group

3. Light number

4. Master/slave

status

5. Remaining

battery operation

time with current

settings

6. Settings

7. Setting value

instructions

CCT

INT

G/M

2800

G01 L01 M 2.5h

CCT:

CCT

INT

G/M

2800

G01 L01 M 2.5h

CCT:

1 2 3 4 5

RGB Pixel Tube Lights - USER MANUAL

HUE: Hue from 0° to 359°

SAT: Saturation from 0% to 100%

INT: Intensity from 0% to 100%

GEL: Standard gel colors: Blue, orange,

straw, cyan, green, yellow, red, and

magenta

INT: Intensity from 0% to 100%

HSI MODE RGB GEL MODE COLOR GELS

instructions

HSI

SAT

INT

G01 L01 M 2.5h

HUE: 180°

GEL

3/4 BLUE

INT 1/2 BLUE

G01 L01 M 2.5h

GEL: BLUE

RGB Pixel Tube Lights - USER MANUAL 11

Play/Stop: Starts and stops the effect.

Press the + or – buttons to

start and stop the effect.

INT: Intensity from 0 to 100

EFX EFFECTS

COLOR CHASE: Scrolls through different

colors.

VAR: Variety from 3 to 10

SPD: Speed from 1 to 10

LIGHTNING: Simulates lightning with short

and random bursts of light.

STL: Style from 1, 2, or 3

FRQ: Frequency from 1 to 10

COP CAR: Simulates the ﬂashing lights of a

police car.

STL: Style: B+R (Blue+Red)

B+W (Blue+White)

B+R+W (Blue+Red+White)

PTTN: Pattern: 1 (Single ﬂash)

2 (Double ﬂash)

3 (Triple ﬂash)

EFX MODE

STANDARD EFFECTS

instructions

EFX

INT

100

G01 L01 M 2.5h

VAR

SPD

COLOR CHASE

RGB Pixel Tube Lights - USER MANUAL

EXPLOSION: A burst of light that fades out.

CCT: Correlated Color Temperature from

2800 to 8000 K

DECAY: From 0.5 to 4.0 seconds

TELEVISION: Simulates the glow from a

television with different levels

of intensity.

RANG: CCT Range: LOW (2800 to 4500 K)

MID (4500 to 6200 K)

HIGH (6200 to 8000 K)

SPD: Speed from 1 to 10

FIRE: Simulates the light emitted from a

campﬁre or ﬁreplace.

RANG: CCT Range: LOW (2800 to 2900 K)

MID (2900 to 3000 K)

HIGH (3000 to 3200 K)

SPD: Speed from 1 to 10

PAPARAZZI: Simulates multiple camera

ﬂashes with short bursts.

STL: Style: 1 (Modern ﬂash)

2 (Flash bulb)

FRQ: Frequency from 1 to 10

STROBE: Constant ﬂashing light.

CCT: Correlated Color Temperature from

2800 to 8000 K

FRQ: Frequency from 1 to 10

FIREWORKS: Simulates ﬁreworks with

pulses of color and white light.

COMB: Combination: Color, White, White

(Colors + White)

SPD: Speed from 1 to 10

PULSING: Light steadily fades in and out.

CCT: Correlated Color Temperature from

2800 to 8000 K

TIME: From 0.55 to 4.05 seconds

instructions

RGB Pixel Tube Lights - USER MANUAL 13

PIXEL EFFECTS

Pixel effects offer a wide range of controls

allowing you to adjust pixels independently

of each other.

RAINBOW: Cycles through all 360° of color.

PERIOD: Amount of time it takes to cycle

through all 360° colors from 0.5

to 20 seconds

DELAY: Amount of time each pixel holds

a selected color from 0.02 to 2

seconds

SYM: Light pulse from center outward

On/Off

DIR: Direction left or right

INT: Intensity from 0% to 100%

PXL MODE

PIXEL EFFECTS

instructions

PXL

PXL: RAINBOW

PERIOD

DELAY

0.05S

G01 L01 M 2.5h

RGB Pixel Tube Lights - USER MANUAL

CYCLE: Cycle between four colors.

CLR1: Color 1 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR2: Color 1 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR3: Color 1 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR4: Color 1 from 0° to 360°, 2800 to

8000 K, BLK (no color)

TIME: Amount of time between color is

visible from 0.2 to 20 seconds

FADE%: Smoothness between color

changes from 0% to 100%

DIR: Direction left or right

INT: Intensity from 0% to 100%

TRANS: Transition between two deﬁned

colors.

CLR1: Color 1 from 0° to 360°

CLR2: Color 2 from 0° to 360°

PERIOD: Amount of time it takes to cycle

from CLR1 to CLR2 from 0.5 to

20 seconds

DELAY: Amount of time each pixel holds

a selected color from 0.02 to 2

seconds

DIR: Direction left or right

SYM: Light pulse from center outward

On/Off

INT: Intensity from 0% to 100%

instructions

RGB Pixel Tube Lights - USER MANUAL 15

RUNNING: One color running over a

background color.

RUN: Running color from 0° to 360°, 2800

to 8000 K, BLK (no color)

RUN INT: Running color intensity from

0% to 100%

BACK: Background color from 0° to 360°,

2800 to 8000 K, BLK (no color)

BAK INT: Background color intensity

from 0% to 100%

SPEED: Speed of running color from 1

to 10

LENGTH: Length of running color from

1 to 8

GRDNT: Gradates running color into the

background color On/Off

DIR: Direction left or right

FLOW: Four user deﬁned colors, CCT, or

no color, ﬂowing one at a time into

the next.

CLR1: Color 1 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR2: Color 2 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR3: Color 3 from 0° to 360°, 2800 to

8000 K, BLK (no color)

CLR4: Color 4 from 0° to 360°, 2800 to

8000 K, BLK (no color)

SPEED: Speed of color change from 1

to 10

DIR: Direction left or right

INT: Intensity from 0% to 100%

instructions

RGB Pixel Tube Lights - USER MANUAL

CCT TRANS.: Transition between

two Correlated Color

Temperatures (CCT)

CCT1: Correlated Color Temperature 1

from 2800 to 8000 K

INT: Intensity from 0% to 100%

CCT2: Correlated Color Temperature 2

from 2800 to 8000 K

INT: Intensity from 0% to 100%

PERIOD: Amount of time it takes to cycle

from CCT1 to CCT2 from 0.5 to

20 seconds

DELAY: Amount of time each pixel holds

a selected color from 0.02 to 2

seconds

SYM: Symmetry On/Off

DIR: Direction left or right

FLAME: Simulates a ﬁre or candlelight with

one color over a background color

COLOR: Flame color from 0° to 360°,

2800 to 8000 K, BLK (no color)

FLM INT: Flame color intensity from 0%

to 100%

BACK: Background color from 0° to 360°,

2800 to 8000 K, BLK (no color)

BAK INT: Background color intensity

from 0% to 100%

FRQ: Frequency from 0.25 to 10 Hz

instructions

RGB Pixel Tube Lights - USER MANUAL 17

G#: Group number from 0 to 99.

L#: Assigned light number from 0 to 99.

M/S: Master, None, or Slave.

LNG: Language

RFD: Restore factory settings to default.

DMX: DMX address

SET MODE

SETTINGS

PRO: DMX proﬁle settings

HSI 1 PXL, HSI 8 PXL, HSI 16 PXL,

CCT W. RGBW 1 PXL, CCT W. RGBW 8 PXL,

CCT W. RGBW 16 PXL, GEL 1 PXL.

SET: DMX signal loss behavior if the DMX

signal is interrupted.

HOLD: Holds the last DMX setting

BLK OUT: Displays no color

VER: Firmware version.

instructions

SET

M/S

G01 L01 M 2.5h

G#: 1

RGB Pixel Tube Lights - USER MANUAL

GENARAY RGB APP

1. Press the Mode select button to enter the

Settings mode.

2. Press the Setting select button until DMX

is highlighted.

3. Press the + or − buttons to select a DMX

channel from 001 to 512. Make sure

the DMX channel on the light and your

console are the same.

Genaray RGB-series lights can be controlled

via the RGB Series app from approximately

33 feet away. The RGB Series app expands

the Pixel Tube Lights’ capabilities with a

wider range of editable parameters.

Visit genaray.com for a complete user

manual.

USING DMX

PX2RGB/PX4RGB

instructions

SET

RFD

DMX:

G01 L01 M 2.5h

LNG 001

RGB Pixel Tube Lights - USER MANUAL 19

DEFAULT PXL EFFECT

SETTINGS

RAINBOW

PERIOD: 2 seconds

DELAY: 0.05 seconds

SYM: Off

DIR: —>

INT: 100%

TRANS

CLR1: 340°

CLR2: 240°

PERIOD: 2 seconds

DELAY: 0.05 seconds

SYM: On

INT: 100%

CYCLE

CLR1: 0°

CLR2: 60°

CLR3: 120°

CLR4: 240°

TIME: 1 second

FADE: 30%

INT: 100%

RUNNING

RUN: 360°

RUN INT: 100%

BACK: 240°

BAK INT: 100%

SPEED: 6

LENGTH: 4

GRADIENT: Off

instructions

RGB Pixel Tube Lights - USER MANUAL

CCT TRANS

CCT1: 2800 K

INT: 100%

CCT2: 8000 K

INT: 100%

PERIOD: 2 seconds

DELAY: 0.1 seconds

SYM: Off

FLOW

CLR1: 240°

CLR2: 0°

CLR3: 120°

CLR4: 336°

SPEED: 6

INT: 100%

FLAME

COLOR: 0°

FLM INT: 100%

BACK: 30°

BAK INT: 100%

FRQ: 2.5 Hz

instructions

Page is loading ...

Genaray PX2-RGB User manual

Brand: Genaray

Model: PX2-RGB

Type: User manual

This manual is also suitable for

Download PDF

report

Genaray PX2-RGB User manual

This manual is also suitable for

Genaray PX2-RGB User manual

Related papers

Other documents