Inline Bullet Sizer & Magazine Filler Kit
INSTRUCTIONS
BF2475
1
3
Confirm proper feed tube selection are installed
MAGAZINE SIZE CALIBER TUBE OD TUBE ID COLOR
SMALL 6 tube 22CAL .323” .240" YELLOW
SMALL 26CAL .323” .269" CLEAR
MEDIUM 5 tube 30CAL .445” .355" YELLOW
MEDIUM 35CAL .445” .391" CLEAR
LARGE 4 tube 40 & 45 CAL .562” .478" CLEAR
To change tubes, remove top magazine cylinder and tubes.
Install correct tubes and replace top magazine cylinder.
Assemble Multi-tube Adapter
Screw bullet feed cap into multi-tube adapter.
ADDITIONAL
MAGAZINES
Keep extra
mags on hand
for a quick
swap when
empty.
.220"
to .273"
diameter
.300"
to .372"
diameter
.395"
to .463"
diameter
VALUE
BUNDLE
All three sizes
Bullet Feed
Cap
Multi-tube
Adapter
STANDARD FILLING
Size and fill your mag
and swap to your
Inline bullet feeder,
handle bullets once.
1
SMALL
6 tube
# 92014
MEDIUM
5 tube
# 92015
LARGE
4 tube
# 92016
2
Assemble Multi-tube
Adapter
Select connect tube that
bullet freely passes
through. There are three
sizes: small, medium and
large.
Slide appropriate connect
tube into the multi-tube
adapter.
Connect
tube
Multi-tube
Adapter
Feed Plate
Bullet Feed Cap
Breech Lock Bullet Sizer
Bullet Sizer Insert
Multi-tube Adapter
Cylinder
Cylinder
Tube
4
Combine Multi-
tube Adapter
and Breech
Lock Insert
Tighten multi-
tube adapter
assembly into
breech lock
insert with
correct breech
lock sizer
installed (roll
marking down)
over >
Hex Plug
Install Magazine into Mutli-tube Assembly
Slide magazine onto connect tube, aligning the
hex plug with cap.
Operation tip:
Always rotate tubes
clockwise so bullet feed
cap does not loosen.
2
5
Cylinder
# BF5383
Cylinder
# BF5383
O-RIng
# BF5400
Feed Tubes
Hex Plug
# BF5384
Feed Plate
# BF5384
Connect Tube
Bullet Feed Cap
# BF5385
Breech Lock
Bullet Sizer
Bullet Sizer
Insert
# BS4260
Multi-tube
Adapter
# BS5402
Pan Head Screw
# FT2242
Parts list:
The APP press allows inverted
tube filling and sizing.
Size bullets and transfer the directly
to the Inline Bullet Feed Die
.
Order
APP TUBE RETAINER & CAP.
6When magazine is filled, rotate
cylinder out of register, lift o the
filled tubes.
APP press # 90933
pictured on
Reloading Stand
# 90688
/
