Gladius G1050S User manual

Brand: Gladius

Model: G1050S

Category: Tablets

Type: User manual

Gladius G1050/G1050S

10.4" Intel® Atom™ Z530P

Rugged Tablet PC

User's Manual

Version 1.1

P/N: 4012105000110P 2012.03

This page is intentionally left blank.

- I -

Index

Contents

Declaration of Conformity ...................................................................i

Important Safety Instructions ............................................................iii

General Cleaning Tips ........................................................................iv

Introducing the Rechargeable Battery Pack ..................................... v

Disposing of Your Old Product .........................................................vi

Symbols Description ..........................................................................vi

About User's Manual ......................................................................... vii

Warning ..............................................................................................vii

Additional Information & Technical Support ..................................vii

Warranty ............................................................................................viii

Chapter 1 - General Information .........................................................1

1.1 Packing List ..................................................................................2

1.2 Ordering Information ....................................................................3

1.3 Specications ...............................................................................5

1.4 Overview........................................................................................8

1.5 Dimensions ...................................................................................9

1.6 Bar Code Types ..........................................................................10

1.7 Introduction to Functions .......................................................... 11

Chapter 2 - Installation and Conguration ......................................15

2.1 Getting Start ................................................................................16

2.2 Install Hand Strap .......................................................................17

2.3 Battery Replacement ..................................................................18

2.3.1 External Battery ...................................................18

2.3.2 Internal Battery (optional) ...................................19

2.4 SIM Card Installation ..................................................................23

2.5 DC Power Supply........................................................................23

2.6 Driver & Utilities Installation......................................................24

2.6.1 Chipset Driver Installation ..................................25

2.6.2 Audio Driver Installation ......................................27

2.6.3 VGA Graphics Driver Installation .......................29

2.6.4 LAN Driver Installation ........................................32

- II -

Index

2.6.5 Touch Screen Driver Installation ........................34

2.6.6 Function Keys Installation ..................................37

2.6.7 RS-232 Driver Installation (optional) ..................40

2.6.8 WiFi Driver Installation ........................................41

2.6.9 Bluetooth Driver Installation (optional) .............45

2.6.10 RFID AP Installation (optional) .........................48

2.6.11 3G Driver Installation (optional) ........................51

2.6.12 3G AP Installation (optional) .............................52

2.6.13 Function Key .....................................................55

Chapter 3 - BIOS ................................................................................57

3.1 BIOS Main Setup.........................................................................58

3.2 Advanced Settings .....................................................................60

3.2.1 IDE Conguration ................................................61

3.3 Boot Settings ..............................................................................62

3.3.1 Boot Settings Conguration ...............................63

3.3.2 Boot Device Priority .............................................64

3.3.3 Hard Disk Drives ..................................................65

3.4 Security .......................................................................................66

3.5 Exit Options ................................................................................67

Appendix - Desktop Cradle ...............................................................69

A.1 Getting Start ...............................................................................70

A.2 Specications.............................................................................70

A.3 Overview .....................................................................................71

A.4 Dimensions.................................................................................72

A.5 Introduction ................................................................................73

A.5.1 Installing on the Desktop Cradle .......................73

A.5.2 I/O Ports ...............................................................75

- i -

The information in this document is subject to change without prior notice in

order to improve the reliability, design and function. It does not represent a

commitment on the part of the manufacturer.

Under no circumstances will the manufacturer be liable for any direct, indirect,

special, incidental, or consequential damages arising from the use or inability

to use the product or documentation, even if advised of the possibility of such

damages.

This document contains proprietary information protected by copyright.

All rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Declaration of Conformity

The CE symbol on your product indicates that it is in compliance with the

directives of the Union European (EU). A Certicate of Compliance is available

by contacting Technical Support.

This product has passed the CE test for environmental specications when

shielded cables are used for external wiring. We recommend the use of

shielded cables. This kind of cable is available from ARBOR. Please contact

your local supplier for ordering information.

FCC Class B

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference

that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

- ii -

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

RoHS

ARBOR Technology Corp. certies that all components in its products are

in compliance and conform to the European Union’s Restriction of Use of

Hazardous Substances in Electrical and Electronic Equipment (RoHS)

Directive 2002/95/EC.

The above mentioned directive was published on 2/13/2003. The main

purpose of the directive is to prohibit the use of lead, mercury, cadmium,

hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated

diphenyl ethers (PBDE) in electrical and electronic products. Member states

of the EU are to enforce by 7/1/2006.

ARBOR Technology Corp. hereby states that the listed products do not

contain unintentional additions of lead, mercury, hex chrome, PBB or PBDB

that exceed a maximum concentration value of 0.1% by weight or for cadmium

exceed 0.01% by weight, per homogenous material. Homogenous material is

dened as a substance or mixture of substances with uniform composition

(such as solders, resins, plating, etc.). Lead-free solder is used for all

terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

SVHC / REACH

To minimize the environmental impact and take more responsibility to the

earth we live, Arbor hereby conrms all products comply with the restriction of

SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH --Reg-

istration, Evaluation, Authorization, and Restriction of Chemicals) regulated

by the European Union.

All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- iii -

Important Safety Instructions

Read these safety instructions carefully

1. Read all cautions and warnings on the equipment.

2. Place this equipment on a reliable surface when installing. Dropping it or

letting it fall may cause damage

3. Make sure the correct voltage is connected to the equipment.

4. For pluggable equipment, the socket outlet should be near the equipment

and should be easily accessible.

5. Keep this equipment away from humidity.

6. Disconnect this equipment from the A/C outlet before cleaning it. Use a moist

cloth. Do not use liquid or sprayed detergent for cleaning.

7. To fully disengage the power to the unit, please disconnect the power from

the AC outlet.

8. Do not scratch or rub the screen with a hard object.

9. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,

Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh

chemicals may cause damage to the cabinet and the touch sensor.

10. Remove dirt with a lightly moistened cloth and a mild solvent detergent.

Then wipe the cabinet with a soft dry cloth.

11. The openings on the enclosure are for air convection and protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

12. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

13. If the equipment will not be used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

14. Never pour any liquid into openings. This may cause re or electrical

shock.

15. Never open the equipment. For safety reasons, the equipment should be

opened only by qualied service personnel.

16. If one of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user’s manual.

e. The equipment has been dropped or damaged.

f. The equipment has obvious signs of breakage.

- iv -

General Cleaning Tips

You may need the following precautions before you begin to clean the de-

vice. When you clean any single part or component for the device, please

thoroughly read and understand the details below.

1. We strongly recommended that you should shut down the system before

you start to clean any single components.

2. When you need to clean the device, please rub it with a piece of dry cloth.

3. Be cautious of the tiny removable components when you use a vacuum

cleaner to absorb the dirt on the oor.

4. Never drop the components inside the device or get circuit board damp or

wet.

5. Be cautious of all kinds of cleaning solvents or chemicals when you use it

for the sake of cleaning. Some individuals may be allergic to the ingredi-

ents.

6. Try not to put any food, drink or cigarette around the device.

Cleaning Tools:

Although many companies have created products to help improve the process

of cleaning your devices and peripherals, users can also use household items

to clean their devices and peripherals. Below is a listing of items you may

need or want to use while cleaning your devices or peripherals. Keep in mind

that some components in your device may only be able to be cleaned using

a product designed for cleaning that component, if this is the case it will be

mentioned in the cleaning.

• Cloth: A piece of cloth is the best tool to use when rubbing up a compo-

nent. Although paper towels or tissues can be used on most hardware as well,

we still recommend you to rub it with a piece of cloth.

• Water or rubbing alcohol: You may moisten a piece of cloth a bit with some

water or rubbing alcohol and rub it on the device. Unknown solvents may be

harmful to the plastics parts.

17. The sound pressure level at the operator’s position, according to

IEC 704-1:1982, is no more than 70dB(A).

18. Keep this User’s Manual for later reference.

19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE

EQUIPMENT.

- v -

Introducing the Rechargeable Battery Pack

With very little care, you can maximize the life and lifespan of your G1050/

G1050S series battery. Most importantly, only use your G1050/G1050S se-

ries in its ideal operating temperature (See “G1050/G1050S Series Speci-

cations”) – do not leave it in a hot trunk during the summer.

• Important Terms to Understand

“Battery life” means the time your G1050/G1050S series will run before it must

be recharged (sometimes this is also called “playtime” or “runtime”).

“Battery lifespan” means the total amount of time your battery will last before

it must be replaced.

• Using Your G1050/G1050S Series for the First Time

Be sure to fully charge (approx. 4 hours) your G1050/G1050S series when

you plug it in for the rst time.

• Long-Term Storage & Maintenance

If you do not plan to use your G1050/G1050S series battery for more than

three months, it is recommended that you store the battery separately, fully

charged, and then recharge it every three month. If you store an uncharged

battery, it could fall into a deep worn-out state which would render it incapable

of holding any charge. Be sure to store your G1050/G1050S series and bat-

tery at the proper temperature. (See “G1050/G1050S Series Specications.”)

• Vacuum cleaner: Absorb the dust, dirt, hair, cigarette particles, and other

particles out of the device can be one of the best cleaning methods. Over time,

these items can restrict the airow in a device and cause circuitry to corrode.

• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water are

excellent tools for wiping hard to reach areas in your keyboard, mouse, and

other locations.

• Foam swabs: Whenever possible, it is better to use lint-free swabs such

as foam swabs.

We recommend you to follow the cleaning steps:

1. Close all application programs

2. Close operating software

3. Turn off power switch

4. Remove all peripherals

5. Pull out power cable

- vi -

Disposing of Your Old Product

• Within the European Union

EU-wide legislation, as implemented in each Member State,

requires that waste electrical and electronic products carrying the

mark (left) must be disposed of separately from normal household

waste.

This includes monitors and electrical accessories, such as signal cables or

power cords. When you need to dispose of your display products, please

follow the guidance of your local authority, or ask the shop where you

purchased the product, or if applicable, follow any agreements made between

yourself. The mark on electrical and electronic products only applies to the

current European Union Member States.

• Outside the European Union

If you wish to dispose of used electrical and electronic products outside the

European Union, please contact your local authority so as to comply with the

correct disposal method.

Symbols Description

This symbol of “CAUTION” indicates that there is a danger

of injury to the user or a risk of damage to the product, should

warning notices be disregarded.

Battery Recycle

• Battery Lifespan

The removable batteries for G1050/G1050S series are designed to retain up

to 80% of their original capacity after 300 charging and recharging cycles

when properly maintained. You may choose to replace your battery when it no

longer holds sufcient charge to meet your needs.

- vii -

About User's Manual

This User's Manual is intended for experienced users and integrators with

hardware knowledge of personal computers. If you are not sure about any

description in this User’s Manual, please consult your vendor before further

handling.

Warning

Any changes or modications not expressly approved by the guarantee of this

device could void the user’s authority to operate the equipment.

Additional Information & Technical Support

You can download the related technical documents such as datasheet and

user’s manual as well as driver on our website.

Please do not hesitate to call or e-mail our customer service when you still

cannot get the information you need.

http://www.arbor.com.tw

E-mail: info@arbor.com.tw

This symbol indicates electrical warning.

Change of electric current:

Internal: positive current

External: negative current

- viii -

Warranty

This product is warranted to be in good working order for a period of one year

from the date of purchase. Should this product fail to be in good working order

at any time during this period, we will, at our option, replace or repair it at no

additional charge except as set forth in the following terms. This warranty

does not apply to products damaged by misuse, modications, accident or

disaster.

Vendor assumes no liability for any damages, lost prots, lost savings or any

other incidental or consequential damage resulting from the use, misuse of,

or inability to use this product. Vendor will not be liable for any claim made by

any other related party.

Vendors disclaim all other warranties, either expressed or implied, including

but not limited to implied warranties of merchantability and tness for a par-

ticular purpose, with respect to the hardware, the accompanying product’s

manual(s) and written materials, and any accompanying hardware. This lim-

ited warranty gives you specic legal rights.

Return authorization must be obtained from the vendor before returned mer-

chandise will be accepted. Authorization can be obtained by calling or fax-

ing the vendor and requesting a Return Merchandise Authorization (RMA)

number. Returned goods should always be accompanied by a clear problem

description.

- 1 -

General Information

1Chapter 1

General Information

Chapter 1 - General Information

- 2 -

General Information

1.1 Packing List

Before up and running, please make sure the package contains all of above ac-

cessories. If any of the above items is damaged or missing, contact your vendor

immediately.

1 x G1050 or G1050S

User’s Manual, Driver CD

1 x Europe Standard Cordset

1 x American Standard Cordset

1 x Power Adapter

1 x External Battery Pack

1 x Hand Strap w/ Screws

1 x Stylus

- 3 -

General Information

The following items are normally optional, but some vendors may include

them as a standard package, or some vendors may not carry all the items.

Besides, you should pay attention to two important issues:

1. You should install VMB-1050 before installing VSB-100, for the later is

mounted on the former. You can’t install VSB-100 on the rugged PC directly.

2. Because of the rugged PC’s external design, you can only select one item

among VMB-1050, GRS-1050, SRS-1050 to install.

Optional Accessories

VMB-1050

VESA Mount Bracket for G1050/G1050S

VSB-100

VESA-75 to VESA-100 Bracket

SST-0720

28*3.7cm, Shoulder Strap

1.2 Ordering Information

G1050

10.4" Intel® Atom™ Z530P rugged tablet PC with dual

battery packs, Camera, Bluetooth, WiFi, HSUPA, RFID,

Barcode Scanner

G1050S

10.4" Intel® Atom™ Z530P rugged tablet PC with dual

battery packs, Camera, Bluetooth, WiFi, HSUPA, RFID,

Barcode Scanner

G1050-Medium 10.4" Intel® Atom™ Z530P rugged tablet PC with dual

battery packs, WiFi, Bluetooth, Camera

G1050-Lite 10.4" Intel® Atom™ Z530P rugged tablet PC with external

battery pack, WiFi

G1050S-Lite 10.4" Intel® Atom™ Z530P rugged tablet PC with external

battery pack, WiFi

- 4 -

General Information

Optional Conguration (Congure to Order Service)

BarC-1050

1D/2D Barcode Scanner Kit

BT-1050

Bluetooth 2.1 + EDR Kit

HSUPA-1050

3.75G HSUPA Wireless Kit

iBAT-1040

3-Cell 1880mAH Internal Battery Kit

CAM-1050

2.0M CMOS Camera Kit

RFID-1050

13.56MHz RFID Kit

GRS-1050

GPS and RS-232 2in1 Kit

SRS-1050

Smart Card Reader and RS-232 2in1 Kit

DTC-1050

G1050/G1050S Desktop Cradle

eBAT-1050

2500mAh External Battery Kit

- 5 -

General Information

1.3 Specications

System

CPU Intel® Atom™ Z530P 1.6GHz with FSB 533MHz

Graphics

Controller GMA 500 integrated

Memory 2GB DDR2-800 SDRAM memory module installed

Chipset Intel® System Controller Hub US15WPT

BIOS AMI BIOS

Audio Azalia HD Audio, 1 x Integrated microphone, 1 x Integrated

2W speaker, 1 x Audio-out jack

Storage 1 x 32GB 1.8" SSD

OS support Windows XP (32-bit, SP3), Windows 7 (32-bit)

Peripherals & Devices

USB Port 1 x USB 2.0

Camera 1 x 2.0 megapixels Auto Focus CMOS camera (optional)

RFID Integrated 13.56MHz, ISO 15693/14443A/14443B RFID

Reader (distance: 3~5cm; speed: 5 cards/sec) (optional)

Wi-Fi Integrated WLAN 802.11 b/g/n

Bluetooth Integrated Bluetooth 2.1 + EDR (optional)

GSM/UMTS Gobi 3000 HSUPA module (3.75G) for GSM/GPRS/EDGE,

EV-DO networks (optional)

Barcode

Scanner 1 x 1D/2D Barcode Scanner (optional)

Expansion 1 x 35-pin pogo connector for connection with desktop cradle

1 x ExpressCard/34 or USB 2.0

SIM Socket 1 x SIM socket

SD Card 1 x SD/SDHC slot

Hand Strap 1 x Black Elastic Hand Strap (212mm)

- 6 -

General Information

Button & Indicator

Function Key

10 x Numeric keys (0 ~ 9)

1 x Enter key

1 x 4-way arrow keys

4 x Function keys*

1 x ESC key

1 x Backspace key

1 x Dot (.) key

1 x Brightness control key

Power Button 1 x Power on/off button

LED Indicator*

1 x Battery LED

1 x RFID (optional)/HSUPA (optional) LED

1 x Bluetooth (optional) LED

LCD Display

Size/Type 10.4" AFFS+ TFT Active Matrix Panel

Max Resolution 1024 x 768 (XGA) w/ 262,144 colors

Luminance 340 cd/m² (typ.) for G1050; 800 cd/m² (typ.) for G1050S

Contrast Ratio 600:1

Viewing Angle 178° (H), 178° (V)

Backlight Type LED

Touch Screen

Type 5-Wire Analog Resistive

Light

Transparency 80% (typ.)

Controller

Interface USB interface

*Note: Please turn to Section 1.7 for more information concerning LED indicator and

function keys.

- 7 -

General Information

Power Supply

Adapter Input 100 ~ 240VAC (Full Range)

Adapter Output 19VDC, 3.42A, 65W

Battery Type Li-battery pack

Battery

Capacity 1 x 1880mAH 3-cell, 1 x 2500mAH 4-cell

Battery

Operating Time 8 hours for G1050; 6 hours for G1050S

Mechanical & Environmental

Operating

Temp. -20 ~ 45ºC (-4 ~ 113ºF)

Charging

Temp. 0 ~ 40ºC (32 ~ 104ºF)

Storage

Humidity 5 ~ 95% (non-condensing)

Dimensions

(W x D x H) 205 x 294 x 25 mm (8.07" x 11.57" x 0.98")

Gross Weight 1.1 kg (2.42 lb) for G1050-Lite or G1050S-Lite

Vibration 3 Grms/ 5 ~ 500Hz/ random operation

Shock 40G peak acceleration (11 ms duration)

Transit Drop 122 cm (4 feet), except the front side

IP Rating IP54 (whole unit)

Regulatory CE/FCC Class B compliant

- 8 -

General Information

1.4 Overview

Function Keys

Mic

LED indicators

Power On/Off

Barcode Scanner (optional)

RFID (optional)

Power Jack

ExpressCard/34

or USB 2.0

Brightness

Control Key

Backspace Key

35-pin Pogo Connector for connection with

desktop cradle

SD/SDHC Slot

USB 2.0 port

Audio-out Jack

Auto Focus Camera (optional)

Hand Strap

Integrated 2W

Speaker

External

Hot-swappable

Battery

Battery Lock

Internal Battery+SIM Socket

underneath the plastic cover

Stylus

Note: Since Auto Focus Camera, RFID and Barcode Scanner are optional,

the model you order may be slightly different from appearance shown above.

Page is loading ...

Gladius G1050S User manual

Brand: Gladius

Model: G1050S

Category: Tablets

Type: User manual

Download PDF

report

Gladius G1050S User manual

Gladius G1050S User manual

Other documents