2. S.R.Smith
  3. EOS Portable Automatic Rewinder

S.R.Smith EOS Portable Automatic Rewinder Operating instructions

  • Hello, I've reviewed the instructions for the EOS pool cover device. This document provides step-by-step guidance on how to install and use the device to place thermal pool covers using remote operation, focusing on aligning the reels, using the buttons to unreel the covers, and mobile design features. I'm ready to help answer your questions about the EOS device.
  • How do you start using the EOS device?
    How do you align the EOS device with the reels?
    How do you unreel the pool cover?
EOS WITH REMOTE
INSTRUCTIONS
FOR THERMAL POOL COVERS
1- Unlock brakes on reels and move into desired position on the pool deck.
2- Lock the brakes to prevent unwanted movement.
3- Unplug EOS from the wall charger and roll to the storage reel.
4- Find the ends of the reels tube(s) with the __” square mounts/bolts. Then
grab the handles on both sides of the EOS device and raise or lower
the unit until the round female attachment aligns with the square bolt
and slide them together. (If having problems aligning the bolt, slightly
rotated the reel tube by hand until they align.
5- Using either the remote or the buttons on the EOS unit, press the ____
button to begin unreeling the cover while another person walks down
the side of the pool with a lead line.
6- Repeat for each cover piece, detaching and using the alignment steps
from above
USING THE EOS WITH REMOTE TO PLACE COVERS ON THE POOL
RIGHT BRAKE
800.824.4387 | srsmith.com/thermalpoolcovers
/