S R Smith EOS Operating instructions

EOS WITH DEPLOYER

INSTRUCTIONS

FOR THERMAL POOL COVERS

1- Unlock brakes on reels and move into desired position on the pool deck.

2- Lock the brakes to prevent unwanted movement.

3- Unplug EOS from the wall charger and roll to the storage reel.

4- Grab the deployer and roll the spool to directly line up across the pool

from the center of the reel

5- Grab the line from the deployer and unspool and walk across the side of

the pool and then connect/attach to the cover.

6- Locate the channels on the bottom of the Deployer and roll the EOS

into/on top of those channels and then align the square bolt from the

deployer and female receiver from the EOS. Note you may need to adjust

the EOS vertically to align correctly with the deployer.

7- Once ready, press the ____ button and retrieve the line and pull the cover

across the pool.

Note: keep a sta member at the storage reel to control any excess speed while the tube unfurls.

8- Repeat alignment bullets from above

USING THE EOS WITH DEPLOYER TO PLACE COVERS ON THE POOL

RIGHT BRAKE

800.824.4387 | srsmith.com/thermalpoolcovers