1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs
to cool before replacing.
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1 D
Wiring Bulb
Table of
Contents
STEP 3
STEP 5
Fixture Body
STEP 4
Drill Holes
STEP 2
BWire Connector
x3
Shade
x1
C
STEP 1
AMounting Screw
x3
Fixture Body
Installation Instructions: UQL1500
www.urbanambiance.com
2of3
STEP 1
STEP 2
1
2
1 2 3
4
Step 1
Place Post Fitter to Post
Step 2-3
Mark Mounting Holes Location on Post
Step 4
Drill Holes
1/16” Drill Bit
www.urbanambiance.com
3of3
STEP 4
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 5
www.urbanambiance.com
/
