2. urban ambiance
  3. UQL1353

urban ambiance UQL1353 Installation guide

  • I've reviewed the installation instructions for the UQL1353 light fixture. This document outlines the necessary steps to safely install the fixture, including assembly of the glass panels, mounting, and electrical wiring. The instructions specify the type of bulb required and indicate that it’s not included. I'm ready to answer your questions about the installation process or the fixture itself.
  • What type of bulb is required?
    Is the bulb included?
    What should I do if parts are missing or damaged?
1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs
to cool before replacing.
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
D
Wiring
Table of
Contents
STEP 3
Fixture Body
STEP 4
Drill Holes
STEP 2
BWire Connector
x3
C
Glass Panel & Bulb
STEP 1
AMounting Screw
x3
Glass Panel
x4
Installation Instructions: UQL1353
www.urbanambiance.com
2of3
STEP 1
STEP 2
1
2
1 2 3
4
Step 1
Place Post Fitter to Post
Step 2-3
Mark Mounting Holes Location on Post
Step 4
Drill Holes
1/16” Drill Bit
1 2 3
4
Remove the Cage Install Glass Panel Install Bulb
Re-install the Cage
Slot
*Glass Panels
are varies
according to
purchased*
Tab
www.urbanambiance.com
3of3
STEP 4
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
/