2. Spectrum Industries
  3. 99041S

Spectrum Industries 99041S, 99041B User manual

  • Hello! I've reviewed the provided installation instructions for the ECA Seclusion SECL-1-USB unit. This document details both top and under-table mounting options, and includes information on how to attach the mounting brackets and make data connections. I'm ready to answer any specific questions you might have about the installation process or the device itself.
  • What types of mounting are supported for the Seclusion unit?
    What screws are used to attach the mounting bracket to the Seclusion unit?
    How many #10 screws are needed to attach the Seclusion unit to the table?
    What is the minimum table thickness required for installation?
    What is the minimum distance the forward edge of the Seclusion unit should be from the table edge in an under table mount?
1
Innovative Power + Data Solutions
10 Mountain View Drive • Shelton, CT 06484 • P:800.521.3175 • F:203.924.6687 • www.electri-cable.com
©ECA–January2013—ProductspecificaonssubjecttochangewithoutnoceRLSE‐ISLEUSB‐012113
Seclusion™ Installation Instructions
TABLE
TABLE
Under Table Mounting
SECL-1-USB Shown
Seclusion
Unit
Table Mount
Under Table
#8 Flat Head Screws
2 Provided
#8 Flat Head
Screws
#10 Screws
2 Required
#10 Screws
2 Required
Table Top Mounting
1. Determine if Seclusion is to be top or under table mounted, see
illustrations above.
2. Attach either Table Mount or Under Table Bracket to Seclusion
using 2 #8 flat head machine screws, provided. Note: On un-
der table mount forward edge of Seclusion to be a minimum of
1” back from table edge.
3. Determine location for Seclusion and attach to table, as
shown, using 2 #10 screws, provided (Note: Use caution to not
pierce top surface of table with screws, minimum table thick-
ness .75” thick).
4. Make data connections if required (use caution when snap-
ping RJs into faceplate to prevent them from falling into Seclu-
/