2. Concept 2
  3. RowERG
RowERG

Concept 2 RowERG User manual

  • Hello! I've reviewed the assembly instructions for the Concept2 RowErg. This document details the steps for assembling the rower, including the parts list, dimensions, weight capacity, and required space. I can answer any questions you might have about the assembly process or the device itself.
  • What is the weight capacity of the RowErg?
    What are the dimensions of the assembled RowErg?
    What space is required for using the RowErg?
1
Questions? Comments? Problems?
Contact Concept2 directly at 800.245.5676 (US and Canada)
Or visit us online: concept2.com
PN 1118
PN 1117
12
Weight: 57 lb (26 kg)
Dimensions: 8 ft x 2 ft (244 cm x 61 cm)
Space Required for use: 9 ft x 4 ft (274 cm x 122 cm)
Weight Capacity: 500 lb (227 kg) as tested by Concept2*
*300 lb (135 kg) as tested per European Stationary Fitness
Equipment Testing Standard EN 20957-7
ASSEMBLY INSTRUCTIONS
WITH STANDARD LEGS
PN 1735
x 8
3/4” (1.9 cm)
PN 2233
Long Leg 23.5” (60 cm)
PN 1118
T-27 DRIVER
PN 2230
(4) 3/4” (1.9 cm)
PN 2233
(4) 3/4” (1.9 cm)
PN 2233
ASSEMBLY TIP
Do not fully
tighten screws
until all screws
are in place.
PARTS *not to scale
Concept2, Inc. 105 Industrial Park Drive Morrisville, Vermont USA 05661 concept2.com/contact
c2vt.com/rowassembly
0123
RowErg Assembly Instructions
2
3
How to Use the Device Holder
Insert
device
Pinch and
release to
remove
device.
Loosen knob
to slide lower
bracket up or
down.
Important:
Tighten knob
when device
is in place.
/