2. Active Ventilation
  3. RC-24-H6
RC-24-H6

Active Ventilation RC-24-H6 User manual

  • Hello! I'm a chat assistant that has reviewed the document for the Active Ventilation Products, Inc. Roof Curb RC-24-H6. I understand it includes specifications, installation instructions, and key features of the roof curb, such as its dimensions and material. I'm ready to answer any questions you might have about this product.
  • What is the recommended size for the hole cut in the roof?
    How many screws are needed for the flange?
    What is the recommended installation screw?
25"25"
Hypotenuse = 38"
1.5"
6"
6"
6"
6"
1.5"
1.25"
2.5"
2.5"
27"
1. Cut a square or round hole 25" in diameter in the roof deck.
2. Total number of screws needed for flange = 20
3. Recommended installation screw: #10 x 1 1/2" Sheet Metal Screw
4. Flash roof curb onto deck according to specifications of the
membrane manufacturer.
5. Screws not included.
Wood nailer
Insulation
Membrane
Screw
Roof deck
Exhaust or Intake
Curb Mount Flange
Roof Vent
Duct from
Below
Roof Curb
Active Ventilation Products, Inc.
Website: roofvents.com Email: [email protected]
Roof Curb Model: RC-24-H6
Inside Opening: 25", Outside Length & Width: 27", Height: 6"
1/1/2023
Roof Curb Installation Instructions
Roof Curb Flashing Detail
Angled View
Top View
- Aluminum Alloy 3003-H14
- Thickness = 0.040" ± 0.005
- Tolerance = ± .25 ( 14" )
Screws
/