Ningbo CSTAR:
The Ningbo CSTAR is a compact and versatile wireless audio transmitter and receiver. With its dual modes (TX and RX), it allows you to stream audio wirelessly from various devices. Here's a brief overview of its capabilities:
-
Transmitter Mode (TX):
- Connect the CSTAR to audio sources with a 3.5mm audio connector output, such as MP3 players, laptops, or TVs.
- Transmit audio wirelessly to Bluetooth-enabled speakers, headphones, or earbuds.
-
Receiver Mode (RX):
- Connect the CSTAR to speakers or audio systems with a 3.5mm audio connector input.
- Receive audio wirelessly from Bluetooth-enabled devices like smartphones, tablets, or computers.
Ningbo CSTAR:
The Ningbo CSTAR is a compact and versatile wireless audio transmitter and receiver. With its dual modes (TX and RX), it allows you to stream audio wirelessly from various devices. Here's a brief overview of its capabilities:
-
Transmitter Mode (TX):
- Connect the CSTAR to audio sources with a 3.5mm audio connector output, such as MP3 players, laptops, or TVs.
- Transmit audio wirelessly to Bluetooth-enabled speakers, headphones, or earbuds.
-
Receiver Mode (RX):
- Connect the CSTAR to speakers or audio systems with a 3.5mm audio connector input.
- Receive audio wirelessly from Bluetooth-enabled devices like smartphones, tablets, or computers.
USER MANUAL
What’s in the box?
1. Transmitter*1
2. User manual*1
3. Type-C USB cable*1
Overview
1.Charging input port
2.TX/RX Mode switch
3.Power Button
4.LED Indicator
5.3.5mm Audio plug
Specifications:
1. Model: ES04
2. Input: DC 5V / 200mA
3. Battery capacity: 3.7V/200mAh 0.74Wh
Operation Instructions
TX Mode:
1. Slide the mode switch to TX mode
2. Connecto the transmitter to the audio soure
device which has 3.5mm audio connector output
3. Long press the power button to turn on the
transmitter, the LED indicator will flash red.
4. Power on the wireless speaker or earbuds, the
transmitter will pair them automatically, the
LED indicator will be turned into solid red once
paired successful.
RX Mode:
1. Slide the mode switch to RX mode
2. Connecto the transmitter to the speaker which
has 3.5mm audio connector intput
3. Long press the power button to turn on the
transmitter, the LED indicator will flash blue
4. Using your mobile device, search for Wireless
devices and select Wireless ID ‘ES04’. It will pair
automatically. The LED indicator of transmitter
will be turned into solid blue once paired
successful.
Charging Transmitter:
Use the USB cable included to connect the transmitter
to a computer or adaptor, the LED indicator will
display a solid red light. When the transmitter is fully
charged, the red light will be turned off.
Note: The transmitter will automatically turned off
after 5 mins if no any device paired.
Attention:
1. Please avoid exposure, rain, water droplets, avoid
prolonged exposure to high temperature, high
humidity environment.
2. During use, please make it away from heat, high
pressure, and prevent children from playing with
this product.
3. When the transmitter is automatically turned off,
may indicate that the lithium battery power is
shortaged, need to be charged.
4. Do not drop or bump and applied heavy pressure
to avoid damage to the product.
TX RX
1
2
3
4
5
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
-
1
-
2
Ningbo CSTAR:
The Ningbo CSTAR is a compact and versatile wireless audio transmitter and receiver. With its dual modes (TX and RX), it allows you to stream audio wirelessly from various devices. Here's a brief overview of its capabilities:
-
Transmitter Mode (TX):
- Connect the CSTAR to audio sources with a 3.5mm audio connector output, such as MP3 players, laptops, or TVs.
- Transmit audio wirelessly to Bluetooth-enabled speakers, headphones, or earbuds.
-
Receiver Mode (RX):
- Connect the CSTAR to speakers or audio systems with a 3.5mm audio connector input.
- Receive audio wirelessly from Bluetooth-enabled devices like smartphones, tablets, or computers.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Wi Digital Systems Sure-Ears User manual
-
Turtle Beach Ear Force XP300 User manual
-
Lightspeed Topcat User manual
-
Lightspeed RedCat User manual
-
Lightspeed Mobile PA User manual
-
-
AUKEY BT-C6 User manual
-
Kysho Multimedia LifeJacket IPX 67 User manual
-
Azden PRO-XD Operating instructions
-
Altec SOLOJACKET IMW375 Owner's manual
