Schumacher DSR136 Memory Saver Owner's manual

Brand: Schumacher

Model: DSR136 Memory Saver

Category: Battery chargers

Type: Owner's manual

0099002102E-00

MODEL / MODELO / MODÈLE :

DSR136

Memory Saver

Conservador de Memoria

Économiseur de Mémoire

OWNERS MANUAL / MANUAL DEL USUARIO / MANUEL D’UTILISATION

PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE.

This manual will explain how to use your memory saver safely and effectively.

Please read and follow these instructions and precautions carefully.

POR FAVOR GUARDE ESTE MANUAL DEL PROPIETARIO Y LEA ANTES DE

CADA USO. En este manual se explica cómo utilizar el conservador de memoria con

seguridad y ecacia. Por favor, lea y siga las siguientes instrucciones y precauciones.

ESSAYER DE GARDER LE MANUEL D’INSTRUCTIONS ET LE LIRE AVANT

CHAQUE UTILISATION. Ce manuel explique comment utiliser l’unité d’une façon

sûre et efcace. S’il vous plaît lisez et suivez ces instructions et précautions.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ...................................................................................5

PERSONAL PRECAUTIONS ....................................................................................................5

CHARGER AND AC POWER CORD CONNECTIONS ............................................................6

INSTALLATION INSTRUCTIONS .............................................................................................6

FEATURES ................................................................................................................................6

CHARGING THE INTERNAL BATTERY OF THE MEMORY SAVER ......................................6

OPERATING INSTRUCTIONS .................................................................................................7

MAINTENANCE INSTRUCTIONS ............................................................................................8

MOVING AND STORAGE INSTRUCTIONS .............................................................................9

SPECIFICATIONS .....................................................................................................................9

ACCESSORIES/REPLACEMENT PARTS ................................................................................9

BEFORE RETURNING FOR REPAIRS ....................................................................................9

LIMITED WARRANTY (U.S./CANADA) ..................................................................................10

LIMITED WARRANTY (AUSTRALIA) .....................................................................................11

WARRANTY CARD .................................................................................................................24

CONTENIDOS

INSTRUCCIONES IMPORTANTES DE SEGURIDAD ...........................................................12

PRECAUCIONES PERSONALES ..........................................................................................12

CONEXIONES DEL CARGADOR Y DEL CABLE DE ALIMENTACIÓN DE CA ....................13

INSTRUCCIONES DE INSTALACIÓN ....................................................................................13

CARACTERÍSTICAS ...............................................................................................................13

CARGA DE LA BATERÍA INTERNA DEL CONSERVADOR DE MEMORIA ..........................13

INSTRUCCIONES DE OPERACIÓN ......................................................................................14

INSTRUCCIONES DE MANTENIMIENTO .............................................................................16

INSTRUCCIONES PARA EL MANEJO Y ALMACENAMIENTO ............................................16

ESPECIFICACIONES ..............................................................................................................16

ACCESORIOS / REPUESTOS ...............................................................................................16

ANTES DE DEVOLVER A REPARACIONES .........................................................................17

GARANTÍA LIMITADA ..............................................................................................................17

TARJETA DE GARANTÍA ........................................................................................................24

TABLE DES MATIÈRES

CONSIGNES DE SÉCURITÉ IMPORTANTES .......................................................................18

PRÉCAUTIONS PERSONNELLES ........................................................................................18

CHARGEUR ET CORDON CA ................................................................................................19

INSTRUCTIONS POUR L’INSTALLATION .............................................................................19

CARACTÉRISTIQUES ............................................................................................................19

CHARGEMENT DE LA BATTERIE INTERNE DE L’ÉCONOMISEUR DE MÉMOIRE ..........19

CONSIGNES D’UTILISATION .................................................................................................20

INSTRUCTIONS D’ENTRETIEN .............................................................................................22

INSTRUCTIONS DE TRANSPORT ET STOCKAGE .............................................................22

SPÉCIFICATIONS ...................................................................................................................22

ACCESSOIRES / PIÈCES DE RECHANGE ...........................................................................22

AVANT DE RETOURNER POUR LES RÉPARATIONS .........................................................23

GARANTIE LIMITÉE................................................................................................................23

CARTE DE GARANTIE ...........................................................................................................25

• 5 •

CONTAINS SEALED, NON-SPILLABLE LEAD-ACID BATTERY.

MUST BE DISPOSED OF PROPERLY.

WARNING: Possible explosion hazard. Contact with battery acid may cause

severe burns and blindness. Keep out of reach of children.

1. IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

WARNING!

RISK OF ELECTRIC SHOCK OR FIRE.

1.1 Read the entire manual before using this

product. Failure to do so could result in

serious injury or death.

1.2 This memory saver is not intended for

use by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge.

1.3 Children should be supervised to ensure

they do not play with the memory saver.

1.4 Do not put ngers or hands into any of the

memory saver’s outlets.

1.5 Do not expose the memory saver to rain

or snow.

1.6 Use only recommended attachments. Use

of an attachment not recommended or

sold by Schumacher

Electric Corporation

may result in a risk of re, electric

shock or injury to persons or damage to

property.

1.7 Do not operate the memory saver with

damaged cables; have the cable replaced

immediately by a qualied service person.

1.8 Do not operate the memory saver if it has

received a sharp blow, been dropped or

otherwise damaged in any way; take it to

a qualied service person.

1.9 Do not disassemble the memory saver;

take it to a qualied service person when

service or repair is required. Incorrect

reassembly may result in a risk of re or

electric shock.

WARNING! RISK OF EXPLOSIVE GASES.

1.10 WORKING IN THE VICINITY OF A

LEAD-ACID BATTERY IS DANGEROUS.

BATTERIES GENERATE EXPLOSIVE

GASES DURING NORMAL BATTERY

OPERATION. FOR THIS REASON, IT IS

OF UTMOST IMPORTANCE THAT YOU

FOLLOW THE INSTRUCTIONS EACH

TIME YOU USE THE MEMORY SAVER.

2. PERSONAL PRECAUTIONS

WARNING! RISK OF EXPLOSIVE

GASES. A SPARK NEAR THE BATTERY

MAY CAUSE A BATTERY EXPLOSION.

TO REDUCE THE RISK OF A SPARK

NEAR THE BATTERY:

2.1 NEVER smoke or allow a spark or ame

in the vicinity of a battery or engine.

2.2 Remove personal metal items such as

rings, bracelets, necklaces and watches

when working with a lead-acid battery. A

lead-acid battery can produce a short-

circuit current high enough to weld a ring

or the like to metal, causing a severe

burn.

2.3 Be extra cautious to reduce the risk of

dropping a metal tool onto the battery. It

might spark or short-circuit the battery or

other electrical part that may cause an

explosion.

2.4 Do not permit the internal battery of the

memory saver to freeze. Never charge a

frozen battery.

2.5 Consider having someone nearby to

come to your aid when you work near a

lead-acid battery.

2.6 Have plenty of fresh water and soap

nearby in case battery acid contacts your

skin, clothing or eyes.

2.7 Wear complete eye and body protection,

including safety goggles and protective

clothing. Avoid touching your eyes while

working near the battery.

2.8 If battery acid contacts your skin or

clothing, immediately wash the area

with soap and water. If acid enters your

eye, immediately ood the eye with cold

running water for at least 10 minutes and

get medical attention right away.

2.9 If battery acid is accidentally swallowed,

drink milk, the whites of eggs or water.

DO NOT induce vomiting. Seek medical

attention immediately.

• 6 •

3. CHARGER AND AC POWER CORD CONNECTIONS

WARNING!

RISK OF ELECTRIC SHOCK OR FIRE.

3.1 The memory saver’s charger is for use

on a nominal 120-volt circuit. The plug

must be plugged into an outlet that

is properly installed and grounded in

accordance with all local codes and

ordinances. The plug pins must t the

receptacle (outlet). Do not use with an

ungrounded system. NOTE: Pursuant to

Canadian Regulations, use of an adapter

plug is not allowed in Canada. Use of an

adapter plug in the United States is not

recommended and should not be used.

4. INSTALLATION INSTRUCTIONS

4.1 Remove all cord wraps and uncoil the cables prior to using the memory saver.

5. FEATURES

2 3

1. Internal battery charger plug

2. Charging status LEDs

3. Internal battery status LEDs

4. Internal battery status test

switch

5. OBDII (On-Board Diagnostic)

connector with memory saver

detector

Not shown:

6. Plug adaptors (types A and I)

7. Memory saver detector ON/

OFF switch (on back)

8. Memory saver 5A ATC fuse

(on back)

9. 12V DC power outlet (on back)

10. Velcro strap

6. CHARGING THE INTERNAL BATTERY OF THE MEMORY SAVER

IMPORTANT:

CHARGE IMMEDIATELY AFTER

PURCHASE, AFTER EACH USE

AND EVERY 30 DAYS TO KEEP

THE MEMORY SAVER’S INTERNAL

BATTERY FULLY CHARGED.

6.1 LED Indicators:

To check the internal battery’s charge

status, press the Battery Status button on

the front of the memory saver.

The LEDs will indicate the charge level as

follows:

• A red

LED indicates a 50% or less

charge and you should immediately

recharge the memory saver.

• A yellow

LED indicates a 50 to 75%

charge. The memory saver may be used

but should be recharged as soon as

possible.

• A green

LED indicates the internal

battery is fully charged.

• The CHARGING

(red) LED indicates

the memory saver is charging (connected

to an AC power source.) At full charge,

the CHARGED

(green) LED will light.

6.2 Charging the Internal Battery Using the

Included Wall Charger

1. Work in a well ventilated area and do

not restrict the ventilation in any way.

2. Use only the included wall charger to

charge the internal battery. Using any

other charger or using the included

charger for any other purpose could

result in personal injury or property

damage.

3. Use the appropriate plug adaptor for

your plug type (type A for USA or type I

for AUS).

• 7 •

4. Plug the included wall charger into the

charger plug on the side of the unit.

5. Conrm the AC outlet voltage matches

the input voltage of the wall charger.

6. Plug the wall charger into a live AC

wall outlet.

7. The

CHARGING (red) LED will glow,

indicating charging.

8. The

CHARGED (green) LED will

light when the battery has reached

full charge. This could take up to 72

hours, depending on the age and

condition of the battery. The charger will

automatically go into maintain mode and

maintain the battery at full charge without

damaging it.

9. Charge the memory saver as soon as

possible after use.

NOTE: To reduce the risk of damage to

the electric plug or cord, pull by the plug

rather than the cord when disconnecting

the memory saver’s charger.

You may also charge the internal battery

while driving, using a male-to-male

charger cable (p/n 94500109 – not

included). Insert one end of the accessory

cable into the 12V DC power outlet and

the other end into the vehicle’s accessory

outlet (lighter socket). Completely

disconnect the charger cable when the

engine is not running.

NOTE: Use a male-to-male adaptor only

for charging the internal battery. You must

use the OBD Connector to save memory.

IMPORTANT: The CHARGING (red) LED

and the CHARGED (green) LED do not

operate during this method of charging.

Using this method to charge the battery

overrides the maintain mode and the

battery can be overcharged. Monitor

the progress of the battery and when it

reaches a full (100%) charge, disconnect

the charger. Do not charge it for more

than one hour or leave the battery

unattended. It could explode, causing

property damage or personal injury.

7. OPERATING INSTRUCTIONS

Use the memory saver to save the

vehicle’s on-board diagnostic computer

settings (radio programs, diagnostic

codes, etc.) while the battery is

disconnected from the vehicle during

repair or maintenance.

7.1 BEFORE USING THE MEMORY SAVER

Make sure that the memory saver’s

internal battery is fully charged. See LED

Indicators section.

WARNING! Before disconnecting the

positive cable from the battery, it is

extremely important to realize this cable is

live (it is receiving 12V from the memory

saver’s OBD port) and cannot come

into contact with the negative cable or

the vehicle ground. Use an insulator

to cover the terminal to protect it from

accidental contact with the negative cable

or vehicle’s chassis. Failure to cover and

protect the positive cable terminal may

create a short circuit and cause damage

to the ECU or vehicle’s electrical system

and loss of vehicle memory.

WARNING! Verify all vehicle accessories

are OFF. To prevent overloading of a

vehicle fuse or other vehicle damage, do

not use the memory saver through the

OBDII port if the vehicle’s current draw

exceeds the vehicle specications when

the vehicle is in a KEY OFF condition.

Some newer vehicles continue to draw

power for an extended period of time

(cooling fans, alarms, etc.). Consult the

vehicle manufacturer’s specications to

determine the vehicle’s exact current draw

with all accessories off, then use an amp

clamp to determine the actual current

draw. The memory saver cannot be used

on vehicles that draw more power than

the smallest fuse in the OBD circuit,

ECU circuit or vehicle’s electrical system.

Exceeding this fuse rating may damage

the OBD, ECU and/or vehicle’s electrical

system.

7.2 USING THE MEMORY SAVER

DETECTOR AND MEMORY SAVER

Some vehicle manufacturers do not allow

the use of a memory saver through the

OBDII. Consult the vehicle manufacturer

before use, to determine if a memory

saver is acceptable for use on the vehicle.

Turn off the vehicle, remove the key, and

make sure all accessories are off.

WARNING: Verify all vehicle accessories

are OFF (fan, interior lights, etc.).

Headlights must be in OFF position, not

AUTO position. To prevent overloading

of a vehicle fuse, memory saver fuse or

other vehicle damage, do not use the

memory saver through the OBDII port if

the vehicle’s current draw is 4 amps or

more when the vehicle is in a KEY OFF

condition (use an amp clamp to measure

the amperage draw). If unable to measure

the vehicle’s current draw, turn the

vehicle’s key to the OFF position and wait

25 minutes. This ensures that all retained

accessories are in a power OFF state (for

example: fan, headlights, etc.).

• 8 •

1. On the back of the DSR136, move the

memory saver detector ON/OFF switch

to the ON position. The yellow ON LED

in box #1 will light, indicating power on.

2. Connect the OBDII diagnostic connector

to the vehicle’s OBDII port. Make

sure the connector is fully engaged.

The yellow

CONNECTED LED

in box #2 will light,

indicating a good

connection.

3. Verify that the green

PROCEED LED

in box #3 lights

up, indicating you

may disconnect the

vehicle’s battery.

If the red DO NOT

PROCEED LED

in box #3 lights up,

do not disconnect the vehicle’s battery;

disconnect the DSR136 and contact a

qualied service person for electrical

repair.

4. Disconnect the vehicle’s battery

cables and cover the positive and

negative cables with an insulator,

such as electrical tape. This prevents

the connectors from touching metal,

each other, or the chassis and causing

a short circuit, due to the vehicle’s

electrical system receiving power

through the OBD connection.

WARNING: When working with the

vehicle’s battery, review all of the battery

manufacturer’s safety instructions,

warnings and directives regarding battery

disconnection, removal and replacement.

5. Remove the old battery and put the

new battery into position.

6. Remove the insulator from the positive

cable and connect it to the positive

terminal of the new battery.

7. Remove the insulator from the negative

cable and connect it to the negative

terminal of the new battery.

8. Once the new battery is connected,

unplug the memory saver’s OBD

connector from the vehicle’s OBD port

and move the memory saver detector

ON/OFF switch to the OFF position.

9. Charge the memory saver as soon as

possible after use.

7.3 POWERING A 12V DC DEVICE:

The memory saver is a power source for

all 12V DC accessories that are equipped

with a 12V accessory plug. Use it for power

outages and shing or camping trips.

1. Make sure the device to be powered

is OFF before inserting the 12V DC

accessory plug into the 12V DC

accessory outlet.

2. Open the protective cover of the

DC power outlet on the back of the

memory saver.

3. Plug the 12V DC device into the DC

power outlet, and turn on the 12V DC

device (if required).

If the 12V DC device draws more than 9A

or has a short circuit, the internal circuit

breaker of the memory saver will trip

and disconnect the power to the device.

Disconnect the 12V DC device. The

breaker will automatically reset after an

overload occurs.

IMPORTANT: The DC power outlet is

wired directly to the internal battery.

Extended operation of a 12V DC device

may result in excessive battery drain.

Recharge immediately after unplugging

the 12V DC device.

IMPORTANT: Do not power a 12V device

with the memory saver while using the OBD

connector to power the on-board diagnostic

computer. Doing so will drain the memory

saver’s internal battery and reduce available

run time.

8. MAINTENANCE INSTRUCTIONS

8.1 After use and before performing

maintenance, unplug and disconnect the

memory saver.

8.2 Use a dry cloth to wipe all battery

corrosion and other dirt or oil from the

cords and the memory saver case.

8.3 Ensure that all of the memory saver

components are in place and in good

working condition.

8.4 Servicing does not require opening the unit,

as there are no user-serviceable parts.

8.5 All other servicing should be performed by

qualied service personnel.

• 9 •

9. MOVING AND STORAGE INSTRUCTIONS

9.1 Store the memory saver in an upright

position.

9.2 Store inside, in a cool, dry place.

9.3 If the memory saver is moved around the

shop or transported to another location,

take care to avoid/prevent damage to the

cords and memory saver. Failure to do so

could result in personal injury or property

damage.

IMPORTANT: Do not use and/or store the

memory saver in or on any area or surface

where damage could occur if the internal

battery should unexpectedly leak acid.

9.4 IMPORTANT:

• CHARGE IMMEDIATELY AFTER

PURCHASE

• KEEP FULLY CHARGED

Charge the memory saver’s internal

battery immediately after purchase, after

every use and every 30 days.

All batteries are affected by temperature.

The ideal storage temperature is at

70ºF. The internal battery will gradually

self-discharge (lose power) over time,

especially in warm environments.

Leaving the battery in a discharged state

may result in permanent battery damage.

To ensure satisfactory performance and

avoid permanent damage, charge the

internal battery every month.

10. SPECIFICATIONS

Internal battery type ........................................................Maintenance-free AGM lead-acid

Nominal voltage ......................................................................................................12V DC

Capacity ........................................................................................................................9Ah

Connector ................................................................................................................. OBDII

DC power outlet (OBD port and DC outlet) maximum continuous load ........... 12V DC, 9A

Dimensions (H x W x D).............................7.5˝ x 8˝ x 5.5˝ (190 mm x 203 mm x 140 mm)

Weight ...................................................................................................... 8.0 lbs. (3.63 kg)

11. ACCESSORIES/REPLACEMENT PARTS

Male-to-male accessory cable ............................................................................ 94500109

AC wall charger (with A and I-plug adaptors) ...................................................93026987Z

12. BEFORE RETURNING FOR REPAIRS

If these solutions do not eliminate the problem,

or for more information about troubleshooting,

contact customer service for assistance:

[email protected]

www.batterychargers.com

or call 1-800-621-5485

For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.

DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION

(RMA) number from Customer Service at Schumacher Electric Corporation.

• 10 •

13. LIMITED WARRANTY (U.S./CANADA)

SCHUMACHER ELECTRIC CORPORATION, 801 BUSINESS CENTER DRIVE, MOUNT

PROSPECT, IL 60056-2179, MAKES THIS LIMITED WARRANTY TO THE ORIGINAL

RETAIL PURCHASER OF THIS PRODUCT. THIS LIMITED WARRANTY IS NOT

TRANSFERABLE OR ASSIGNABLE.

Schumacher Electric Corporation (the “Manufacturer”) warrants this memory saver for

one (1) year and the internal battery for ninety (90) days from the date of purchase at retail

against defective material or workmanship that may occur under normal use and care. If

your unit is not free from defective material or workmanship, Manufacturer’s obligation

under this warranty is solely to repair or replace your product, with a new or reconditioned

unit, at the option of the Manufacturer. It is the obligation of the purchaser to forward the

unit, along with proof of purchase and mailing charges prepaid to the Manufacturer or its

authorized representatives in order for repair or replacement to occur.

Manufacturer does not provide any warranty for any accessories used with this product

that are not manufactured by Schumacher Electric Corporation and approved for use with

this product. This Limited Warranty is void if the product is misused, subjected to careless

handling, repaired, or modied by anyone other than Manufacturer or if this unit is resold

through an unauthorized retailer.

Manufacturer makes no other warranties, including, but not limited to, express, implied or

statutory warranties, including without limitation, any implied warranty of merchantability or

implied warranty of tness for a particular purpose. Further, Manufacturer shall not be liable

for any incidental, special or consequential damage claims incurred by purchasers, users

or others associated with this product, including, but not limited to, lost prots, revenues,

anticipated sales, business opportunities, goodwill, business interruption and any other injury

or damage. Any and all such warranties, other than the limited warranty included herein,

are hereby expressly disclaimed and excluded. Some states do not allow the exclusion or

limitation of incidental or consequential damages or length of implied warranty, so the above

limitations or exclusions may not apply to you. This warranty gives you specic legal rights

and it is possible you may have other rights which vary from this warranty.

THIS LIMITED WARRANTY IS THE ONLY EXPRESS LIMITED WARRANTY AND THE

MANUFACTURER NEITHER ASSUMES OR AUTHORIZES ANYONE TO ASSUME OR

MAKE ANY OTHER OBLIGATION TOWARDS THE PRODUCT OTHER THAN THIS

WARRANTY.

• 11 •

14. LIMITED WARRANTY (AUSTRALIA)

WARRANTY TERMS AND CONDITIONS

Schumacher Electric Corporation (the “Manufacturer”) or the resellers authorized by the

Manufacturer (the “Reseller”) warrant this memory saver (the “Product”) for one (1) year,

according to the following stipulations. Any and all warranties, other than the warranty included

herein, are hereby expressly disclaimed and excluded to the fullest extent permissible under

applicable law. Legislation may imply warranties or conditions or impose obligations on

Manufacturer which cannot be excluded, restricted or modied in relation to consumer goods.

Consumer End-User Warranty

Any claims under this warranty must be communicated to Reseller within 2 months after discovery

of the non-conformity.

Resellers/Professional End-User Warranty

The Manufacturer provides a limited warranty for hidden defects or non-conformities. This

warranty is subject to the following conditions:

a. The Manufacturer only warrants hidden defects in material or workmanship present in

their root cause at the moment of the rst sale by the Manufacturer;

b. Manufacturer’s obligation under this warranty is limited to repairing or replacing the

Product with a new or reconditioned unit at the sole option of the Manufacturer;

c. Manufacturer does not have any warranty obligations if the alleged defects were caused

by abnormal usage, fair wear and tear, unauthorized use of the Product or use of the

Product differing from the description in the applicable manual or other specications

given by the Manufacturer, insufcient care, repairs carried out by persons or entities or

with parts not approved by Manufacturer, poor care, accidents, unauthorized changes or

modications, incorrect transport, storage or treatment of the Product;

d. In order to exercise this right, the Product must be returned complete and in its original state

and packaging, with mail costs prepaid, along with proof of purchase to the Manufacturer

or its authorized representatives in order for repair or replacement to occur.

Common Warranty Provisions

The warranty mentioned above only applies to the rst professional or consumer user

having legally acquired the Product from the Manufacturer or a Reseller. No warranty is

extended towards clients, agents or representatives of those buyers.

The Product is sold under the specications, for the use and purpose in accordance with the

provisions of this manual, with express exclusion and disclaimer of warranty of any other

specications, uses and purposes.

Authorized Resellers are prohibited from making any statements or providing any warranty

in excess of the above warranties. Non-authorized resellers may only sell the product

under the condition that they assume all warranty obligations with the total exclusion of any

warranty provided by the Manufacturer.

Manufacturer does not provide any warranty for any accessories used with the Product that

are not manufactured by Schumacher Electric Corporation.

This warranty does not exclude or diminish any claims the Manufacturer may have against

the distributors of The Product.

THE MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ASSUME

OR MAKE ANY OTHER OBLIGATION TOWARDS THE PRODUCT OTHER THAN THIS

WARRANTY.

Warranty, Repair Service and Distribution Centers:

Australia/New Zealand:

Schumacher Asia Pacic Pty. Ltd.

A.B.N. 43613943525

Unit 53B – 28 Burnside Road, Ormeau

Queensland, Australia, 4208

07 3807 6510

Schumacher

and the Schumacher logo are registered trademarks

of Schumacher Electric Corporation.

Page is loading ...

• 24 •

1 YEAR LIMITED

WARRANTY PROGRAM

REGISTRATION

MODEL: _____________________DESCRIPTION: ________________________

This is the only express limited warranty, and the manufacturer neither assumes

nor authorizes anyone to assume or make any other obligation. There is no other

warranty, other than what is described in the product owner’s manual.

The warranty card should be submitted within 30 days of purchase. The customer

must keep the ORIGINAL receipt because it will be required for any warranty claims.

This warranty is not transferable. Send warranty card only.

DO NOT SEND UNIT TO THIS ADDRESS FOR REPAIR.

Mail this card to: Schumacher Electric Corporation

801 Business Center Drive

Mount Prospect, IL 60056-2179

Name ______________________________________________________________

Street Address _______________________________________________________

City ________________________________State _________ Zip Code _________

Phone _____________________Email ___________________________________

Store Name Where Purchased ___________________ Date of Purchase _________

Store Location ____________________ UPC Number ________________________

Serial Number ______________________________________ (SEE PRODUCT)

For faster warranty activation, go to www.batterychargers.com to register your product online.

PROGRAMA DE REGISTRO

DE 1-AÑO DE GARANTÍA

LIMITADA

MODELO: ____________________DESCRIPCIÓN: ________________________

Esta es la única garantía limitada expresa, y el productor no autoriza ni otorga

a alguien a realizar alguna otra obligación. No existe ninguna otra garantía

más que la descrita en el manual del dueño.

La tarjeta de garantía debe enviarse durante los primeros 30 días después de la

compra. El cliente debe mantener el recibo de compra ORIGINAL como

comprobante, el cual le otorga todo derecho a cualquier reclamo de garantía.

Esta garantía no es transferible. Envie tarjeta de garantía solamente.

NO ENVÍE LA UNIDAD A ESTA DIRECCIÓN PARA SU REPARACIÓN.

Enviar esta tarjeta a:

Schumacher Electric Corporation

801 Business Center Drive

Mount Prospect, IL 60056-2179

Nombre ____________________________________________________________

Dirección ___________________________________________________________

Ciudad __________________________Estado ____________ C.P. _____________

Tel: ________________________ Correo electrónico _________________________

Nombre de la Tienda donde se Compró ____________ Fecha de compra _________

Localización de la Tienda ____________ Numero de Serie ____________________

Código de barras ___________________________ (CONSULTE EL PRODUCTO)

Para una activación más rápida, visite nuestra página de internet en www.batterychargers.com

¡AHORRE EN EL ENVÍO! ¡ACTIVE SU GARANTÍA EN LÍNEA-LA FORMA MAS RÁPIDA Y FÁCIL!

Visite nuestra página en www.batterychargers.com para registrar su producto en línea.

WARRANTY CARD / TARJETA DE GARANTÍA (U.S./CANADA)

SAVE ON POSTAGE! ACTIVATE YOUR WARRANTY ONLINE – THE QUICK AND EASY WAY!

Go to www.batterychargers.com to register your product online.

WARRANTY CARD

TARJETA DE GARANTÍA

Page is loading ...

Schumacher DSR136 Memory Saver Owner's manual

Brand: Schumacher

Model: DSR136 Memory Saver

Category: Battery chargers

Type: Owner's manual

Download PDF

report

in other languages

français: Schumacher DSR136 Memory Saver Le manuel du propriétaire
español: Schumacher DSR136 Memory Saver El manual del propietario

Schumacher DSR136 Memory Saver Owner's manual

Schumacher DSR136 Memory Saver Owner's manual

in other languages

Related papers

Other documents