SM427
|
Bicycle Handlebar Mount with Universal Holder
The Mobile Mounting Specialists™
®
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2010 Arkon Resources, Inc.
Package Contents:
(1) SM050-2 - Slim-Grip™ universal phone and portable device holder
(1) CM041-LS-2 (14” Gooseneck) or CM089-ST-2 (8.25” Gooseneck)
Windshield Suction Mount
SM050-2
Universal
Phone Holder
SM520 SM526
|
Slim-Grip™ Universal Holder with Windshield Gooseneck Mount
82 mm
expandable
to 118.5 mm
Compatible with most smartphones, mobile phones, and
cellphones having heights between 80mm and 115mm tall
• Apple iPhone - All models
• RIM BlackBerry - All non- ip models
• HTC Phones - All non- ip models
• Motorola Phones - All non- ip models
• Nokia Mobile Phones - All non- ip models
• Palm - All non- ip models
• LG Mobile Phones - All non- ip models
• Samsung - All non- ip models
• Sony Ericsson - All non- ip models
• Sanyo - All non- ip models
• Pantech - All non- ip models
• Google - All non- ip models
K
J
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
*All brand names and product names are trademarks or registered trademarks of their respective owners.
Connect the dual T-slots (F) on the back of the Slim-Grip™
holder to the dual T-tabs (G) on the windshield gooseneck
mount.
...continued on next column
Slim-Grip™ Holder Attachment
CM041-LS-2
14” Gooseneck
Windshield Suction
Mount
CM089-ST-2
8.25” Gooseneck
Windshield Suction
Mount
Windshield Mounting
Step 1.
Step 2.
Step 1.
Step 3A.
Step 3B.
Firmly push the suction base (A) against the windshield and
ip the base lever down (B) to the locked position.
Adjust the angle of the pedestal head by using both hands
to bend the gooseneck (C).
A
B
C
E
To change the angle and rotation of the pedestal head
use a Phillips-head screwdriver (D) to loosen the screw.
Adjust the angle and rotation of the pedestal head by
loosening the swivel-tightening ring (E).
D
For SM526
with 14” Gooseneck
For SM520
with 8.25” Gooseneck
While securing the holder in one hand, insert your phone or
device into the holder by pushing down on the bottom spring-
loaded support legs (J) with moderate amount of pressure
with the other hand. Slide the top of the device under the
top support legs (K) until it ts snug in the holder.
Adjust Support Legs and Insert Phone into Holder
Step 1.
Step 2.
Adjust the holder support legs (H) by sliding them into the
support leg grooves (I) on the top and bottom of the holder.
H
H
H
H
I
I
F
G
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
T & S Brass & Bronze Works TT-1 Datasheet
-
Amzer AMZ83815 User manual
-
Nokia HH-12 User manual
-
-
Avaya SLIM-GRIP SM511 User manual
-
-
Black & Decker SM427 User manual
-
-
Arcadia SM532 User manual
-
Brodit 512288 Datasheet
