Marshall BD-0314 User manual

Marshall
Brand
Marshall
Model
BD-0314
Type
User manual

Marshall BD-0314

Marshall BD-0314 is a high-quality SDI video distribution amplifier that allows you to distribute a single SDI video signal to multiple outputs. It is ideal for use in a variety of applications, including broadcast, post-production, and live events.

The BD-0314 is easy to use and install. Simply connect the power supply and an SDI video signal to the input, and then connect the outputs to your desired devices. The unit will automatically turn on and begin distributing the video signal.

The BD-0314 features a rugged metal construction and is designed to withstand the rigors of professional use. It also comes with a variety of mounting options, including rack-mount ears and rubber feet, so you can install it in any convenient location.

Marshall BD-0314

Marshall BD-0314 is a high-quality SDI video distribution amplifier that allows you to distribute a single SDI video signal to multiple outputs. It is ideal for use in a variety of applications, including broadcast, post-production, and live events.

The BD-0314 is easy to use and install. Simply connect the power supply and an SDI video signal to the input, and then connect the outputs to your desired devices. The unit will automatically turn on and begin distributing the video signal.

The BD-0314 features a rugged metal construction and is designed to withstand the rigors of professional use. It also comes with a variety of mounting options, including rack-mount ears and rubber feet, so you can install it in any convenient location.

Marshall
BD-0314
SDI VIDEO DISTRIBUTION AMPLIFIER
To operate unit, insert the power plug (Marshall V-PS6-1.2A)
into the power jack located on the rear of the unit and twist
the sleeve to lock the connector on. The unit is automatically
turned on when power is supplied to the unit and indicated
by the power LED on the front of the unit. Supply a
NTSC/PAL SDI video signal (SMPTE 259M) to the video
BNC connector labeled SDI IN.
Installing the hard mount brackets: Your BD-0314 comes
with two brackets that allow the unit to be hard mounted to
any surface with 4 screws. By removing the middle screw
on the enclosure, position the bracket and then replace the
screw. After both brackets are installed, place the unit in the
desired location and mark the holes using a pencil.
Each unit comes with 4 self-adhesive rubber feet to be
placed on the bottom of the unit to protect any surface that it
may be set upon. Available accessories include a space
saving stand that holds the unit in a vertical position or a rack
mountable face panel that holds multiple units in a 1U space.
For more information please visit www.LCDRacks.com.
Marshall
BD-0314
SDI VIDEO DISTRIBUTION AMPLIFIER
To operate unit, insert the power plug (Marshall V-PS6-1.2A)
into the power jack located on the rear of the unit and twist
the sleeve to lock the connector on. The unit is automatically
turned on when power is supplied to the unit and indicated
by the power LED on the front of the unit. Supply a
NTSC/PAL SDI video signal (SMPTE 259M) to the video
BNC connector labeled SDI IN.
Installing the hard mount brackets: Your BD-0314 comes
with two brackets that allow the unit to be hard mounted to
any surface with 4 screws. By removing the middle screw
on the enclosure, position the bracket and then replace the
screw. After both brackets are installed, place the unit in the
desired location and mark the holes using a pencil.
Each unit comes with 4 self-adhesive rubber feet to be
placed on the bottom of the unit to protect any surface that it
may be set upon. Available accessories include a space
saving stand that holds the unit in a vertical position or a rack
mountable face panel that holds multiple units in a 1U space.
For more information please visit www.LCDRacks.com.
  • Page 1 1

Marshall BD-0314 User manual

Marshall
Brand
Marshall
Model
BD-0314
Type
User manual

Marshall BD-0314

Marshall BD-0314 is a high-quality SDI video distribution amplifier that allows you to distribute a single SDI video signal to multiple outputs. It is ideal for use in a variety of applications, including broadcast, post-production, and live events.

The BD-0314 is easy to use and install. Simply connect the power supply and an SDI video signal to the input, and then connect the outputs to your desired devices. The unit will automatically turn on and begin distributing the video signal.

The BD-0314 features a rugged metal construction and is designed to withstand the rigors of professional use. It also comes with a variety of mounting options, including rack-mount ears and rubber feet, so you can install it in any convenient location.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents