Lightolier LP-21 User manual

Lightolier
Brand
Lightolier
Model
LP-21
Category
Work lights
Type
User manual

Lightolier LP-21 is a lighting system that provides bright and efficient illumination for various indoor applications. It features:

  • Universal voltage ballast for compatibility with different power sources
  • Instant start for quick and reliable lighting
  • Color-coded quick connectors for easy and secure wiring
  • Factory-installed ballast disconnect for convenient maintenance
  • Precision die-formed specular aluminum reflector for optimal light distribution
  • Opal acrylic diffuser for uniform and glare-free illumination
  • Emergency battery pack option for backup lighting in case of power outages

Lightolier LP-21 is a lighting system that provides bright and efficient illumination for various indoor applications. It features:

  • Universal voltage ballast for compatibility with different power sources
  • Instant start for quick and reliable lighting
  • Color-coded quick connectors for easy and secure wiring
  • Factory-installed ballast disconnect for convenient maintenance
  • Precision die-formed specular aluminum reflector for optimal light distribution
  • Opal acrylic diffuser for uniform and glare-free illumination
  • Emergency battery pack option for backup lighting in case of power outages
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LP-21
1BHFPG -JOFBS1FSG-ZUFDN8BMM.PVOU-JHIU51FS'PPU/PNJOBM4FDUJPO
#
Module Ordering Information
Style Series Lamps Type Options
2 = 2 Lt Cross T8 = T8 Lamps 4 = 4-Foot U = Uni-voltage Blank = No Options
Section 8 = 8-Foot E = Emergency Pack DS = Dual Switched
D1 = Dimming 120v X4 = 4th through wire
D2 = Dimming 277v
LP W 2 T8
Complete ordering instructions below.
Features
1. Housing: 18 gauge steel. Die-formed steel end cap withconcealed access
holes for through wiring. No exposed fasteners or hardware.
2. Lamping: Two F32T8 fluorescent lamp per 4-Foot section. Provided by others.
3. Reflector: Precision die-formed specular aluminum.
4. Diffuser: Opal Acrylic.
Electrical
Ballast is universal voltage, <10% THD, .88 ballast factor, instant start. 3 con-
ductor, 18 gauge wire. Color-coded quick connectors allow ease of connection
for joiner modules. For special circuiting consult factory. Factory installed ballast
disconnect allows the ballast to be disconnected fromand reconnected to incoming
power under load without turning the entire circuit off.
Dimming: 120/277 VAC.
Emergency Battery Pack: 32 watt: 450 lumens @ 90 minutes.
Labels
UL, cUL and I.B.E.W.
Finish
Powder coated baked white enamel. Custom colors available, consult factory.
Options
Dual Switching: Order the DS option for separate row switching. DS option
automatically ships with the X4 option included.
X4 Wire: Order X4 modules for remainder of the run when using dimming
and/or switched emergency battery pack modules.
Emergency Circuiting: Special circuiting - consult factory.
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete run.
3. Order one END SET per run.
4. Order one JOINER CONNECTOR per MODULE in run minus one.
Length Ballast
8.00” (20.32cm)
3.00”
(7.62cm)
2.50”
(6.35cm)
0.25”(0.64cm)
0.25” (0.64cm)
Half Scale
PERF
3.35" (8.51cm)
Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LP-21
1BHFPG -JOFBS1FSG-ZUFDN8BMM.PVOU-JHIU51FS'PPU/PNJOBM4FDUJPO
#
Mounting Accessories
Fixture Lengths & Mounting Locations
LPWE End Set
One set of a left and
right plate to finish
the run.
LPWC Joiner Connector
Covers the joint
between modules
80” (203.20cm)
98-1/2” (250.19cm)
80” (203.20cm)
80” (203.20cm)
245-1/2” (623.57cm)
13.50”
(34.29cm)
18.00”
(45.72cm)
18.00”
(45.72cm)
13.50”
(34.29cm)
80” (203.20cm)
80” (203.20cm)
80” (203.20cm)
40” (101.60cm)
40” (101.60cm)
147-1/2” (374.65cm)
196-1/2” (499.11cm)
40” (101.60cm)
4’
8’
12’
16’
20’
3” (7.62cm)
49-1/2” (125.73cm)
5.100” (12.95cm)
MOUNTING PLATE DETAIL
0.5” (1.27cm) DIMPLE
WITH 0.187” (0.47cm)
HOLE IN CENTER
1/4-20x1/2 STUDS
(USED TO ATTACH FIXTURE
TO MOUNTING PLATE)
3.275” (8.32cm)
2.500”
(6.35cm)
1.250”
(3.18cm)
2.000”
(5.08cm)
3.500” (8.89cm)
190
200
350
340
180
170
160
150
140
130
120
110
100
9090
80
70
60
50
40
30
20
10
0
400
800
1200
1600
Performance
CANDLEPOWER CURVE
CANDLEPOWER
ZONE 0 22 45 67 90
DEG.
CANDELAS
ROOM CAVITY RATIO
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY RE-
FLECTANCE
80 70 50
WALL REFLECTANCE
70 50 30 70 50 30 50 30 10
0707070606060424242
1636058545250363534
2585349494542323028
3524641454036282523
4484135413531252220
5443630373127221917
6403226342823191714
7372823312520171412
8342620292218161311
931231827201614119
10 29 21 16 25 18 14 13 10 8
20% FLOOR CAVITY REFLECTANCE
DISTRIBUTION
Zone
Lumens % Lamp % Luminaire
0-90 172 3.0 4.1
90-180 4026 69.4 95.9
0-180 4198 72.4 100.0
REPORT NO: LRL 1200-6D
CAT. NO: LPW2T84U
LAMPS: 2-F32T8
LUMENS: 2900
EFFICIENCY: 72.4%
180 1081 1081 1081 1081 1081
175 1234 1211 1168 1093 1091
165 1604 1554 1462 1198 1041
155 1544 1460 1428 1258 955
145 1685 1625 1414 1223 829
135 1354 1425 1360 1014 665
125 959 967 941 885 509
115 931 864 703 710 341
105 555 551 491 326 158
95 154 163 134 121 29
90 30 25 16 11 6
85 35 31 20 11 8
75 46 41 31 17 11
65 51 46 35 20 11
55 69 66 57 44 34
45 65 62 53 42 33
35 68 64 57 49 41
25 62 60 55 49 43
15 58 58 55 52 48
552 5149 49 48
045 4545 45 45
4' (121.92cm)
Module
8' (243.84cm)
Module
End Set Connector
4' (121.92cm) Run 11
8' (243.84cm) Run 11
12' (365.76cm) Run 111 1
16' (487.68cm) Run 21 1
20' (609.60cm) Run 121 2
24' (731.52cm) Run 31 2
  • Page 1 1
  • Page 2 2

Lightolier LP-21 User manual

Lightolier
Brand
Lightolier
Model
LP-21
Category
Work lights
Type
User manual

Lightolier LP-21 is a lighting system that provides bright and efficient illumination for various indoor applications. It features:

  • Universal voltage ballast for compatibility with different power sources
  • Instant start for quick and reliable lighting
  • Color-coded quick connectors for easy and secure wiring
  • Factory-installed ballast disconnect for convenient maintenance
  • Precision die-formed specular aluminum reflector for optimal light distribution
  • Opal acrylic diffuser for uniform and glare-free illumination
  • Emergency battery pack option for backup lighting in case of power outages
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents