Lightolier LP-23 User manual

Lightolier
Brand
Lightolier
Model
LP-23
Category
Work lights
Type
User manual

Lightolier LP-23 is a lighting system designated for indoor use, offering a wide range of options and features to meet various lighting needs. It consists of individual modules that can be combined to create continuous rows of lighting, as well as end sets to finish the run. LP-23 is equipped with a universal voltage ballast, allowing it to operate on a wide range of voltages, and features instant start capability for immediate illumination.

The system's versatility is further enhanced by a variety of options. Dual switching allows for separate row switching, while X4 modules can be used for the remainder of the run when dimming or switched emergency battery pack modules are employed. Emergency circuiting options are also available upon consultation with the factory.

Lightolier LP-23 is a lighting system designated for indoor use, offering a wide range of options and features to meet various lighting needs. It consists of individual modules that can be combined to create continuous rows of lighting, as well as end sets to finish the run. LP-23 is equipped with a universal voltage ballast, allowing it to operate on a wide range of voltages, and features instant start capability for immediate illumination.

The system's versatility is further enhanced by a variety of options. Dual switching allows for separate row switching, while X4 modules can be used for the remainder of the run when dimming or switched emergency battery pack modules are employed. Emergency circuiting options are also available upon consultation with the factory.

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LP-23
1BHFPG -JOFBS1FSG-ZUFDN8BMM.PVOU-JHIU#JBY1FShDN/PNJOBM4FDUJPO
#
Module Ordering Information
Style Series Lamps Type Length Options
2 = 2 Lt Cross B4 = 40w Biax 4 = 4-Foot U = Uni-voltage Blank = No Options
Section B5 = 50w Biax 8 = 8-Foot E = Emergency Pack DS = Dual Switched
D1 = Dimming 120v X4 = 4th through wire
D2 = Dimming 277v
LP W 2
Complete ordering instructions below.
Features
1. Housing: 18 gauge steel. Die-formed steel end cap with concealed access
holes for through wiring. No exposed fasteners or hardware.
2. Lamping: Four FT40W or FT50W fluorescent lamp per 4-Foot section. Provided
by others.
3. Reflector: Precision die-formed specular aluminum.
4. Diffuser: Opal Acrylic.
Electrical
Ballast is universal voltage, <10% THD, .88 ballast factor, instant start. 3 con-
ductor, 18 gauge wire. Color-coded quick connectors allow ease of connection
for joiner modules. For special circuiting consult factory. Factory installed ballast
disconnect allows the ballast to be disconnected from and reconnected to incoming
power under load without turning the entire circuit off.
Dimming: 120/277 VAC.
Emergency Battery Pack: 40 watt: 450 lumens @ 90 minutes.
Labels
UL, cUL and I.B.E.W.
Finish
Powder coated baked white enamel. Custom colors available, consult factory.
Options
Dual Switching: Order the DS option for separate row switching. DS option
automatically ships with the X4 option included.
X4 Wire: Order X4 modules for remainder of the run when using dimming
and/or switched emergency battery pack modules.
Emergency Circuiting: Special circuiting - consult factory.
Ordering Information
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete run.
3. Order one END SET per run.
4. Order one JOINER CONNECTOR per MODULE in run minus one.
Ballast
8.00” (20.32cm)
3.00”
(7.62cm)
2.50”
(6.35cm)
0.25”(0.64cm)
0.25” (0.64cm)
Half Scale
PERF
3.35" (8.51cm)
Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LP-23
1BHFPG -JOFBS1FSG-ZUFDN8BMM.PVOU-JHIU#JBY1FShDN/PNJOBM4FDUJPO
#
Mounting Accessories
Fixture Lengths & Mounting Locations
LPWE End Set
One set of a left and
right plate to finish
the run.
LPWC Joiner Connector
Covers the joint
between modules
80” (203.20cm)
98-1/2” (250.19cm)
80” (203.20cm)
80” (203.20cm)
245-1/2” (623.57cm)
13.50”
(34.29cm)
18.00”
(45.72cm)
18.00”
(45.72cm)
13.50”
(34.29cm)
80” (203.20cm)
80” (203.20cm)
80” (203.20cm)
40” (101.60cm)
40” (101.60cm)
147-1/2” (374.65cm)
196-1/2” (499.11cm)
40” (101.60cm)
4’
8’
12’
16’
20’
3” (7.62cm)
49-1/2” (125.73cm)
5.100” (12.95cm)
MOUNTING PLATE DETAIL
0.5” (1.27cm) DIMPLE
WITH 0.187” (0.47cm)
HOLE IN CENTER
1/4-20x1/2 STUDS
(USED TO ATTACH FIXTURE
TO MOUNTING PLATE)
3.275” (8.32cm)
2.500”
(6.35cm)
1.250”
(3.18cm)
2.000”
(5.08cm)
3.500” (8.89cm)
170
160
150
140
130
110
120
100
0909
80
70
60
50
40
30
20
10
180
350
0
190
0
775
1550
2325
3100
Performance
CANDLEPOWER CURVE
CANDLEPOWER
ZONE 0 22 45 67 90
DEG.
CANDELAS
180 2545 2545 2545 2545 2545
175 2624 2646 2590 2534 2556
165 3153 2984 2894 2601 2488
155 3142 3018 2950 2534 2297
145 3198 3074 2871 2432 2043
135 2894 2826 2669 2130 1672
125 2226 2342 2170 1830 1340
115 1681 1677 1668 1451 920
105 881 885 859 858 475
95 97 113 113 218 106
90 56 50 34 25 21
85 69 61 42 26 20
75 89 82 62 37 27
65 96 89 68 42 25
55 143 140 119 96 74
45 131 124 107 86 69
35 137 132 117 100 86
25 125 120 111 99 88
15 117 116 110 104 98
5 104 102 101 99 98
08989898989
ROOM CAVITY RATIO
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
80 70 50
WALL REFLECTANCE
20% FLOOR CAVITY REFLECTANCE
DISTRIBUTION
Zone
Lumens % Lamp % Luminaire
0-90 357 2.8 4.2
90-180 8161 64.8 95.8
0-180 8519 67.6 100.0
REPORT NO: LRL 1200-6A
CAT. NO: LPW2B44U
LAMPS: 4-F40BX
LUMENS: 3150
EFFICIENCY: 67.6%
56
51
46
42
38
35
32
29
27
25
23
39
32
26
22
18
16
13
12
10
9
8
39
34
30
26
23
20
18
16
15
13
12
39
33
28
24
21
18
15
14
12
11
10
0
1
2
3
4
5
6
7
8
9
10
65
56
49
43
38
34
30
27
24
22
20
65
54
45
39
33
28
25
22
19
17
15
65
59
54
49
45
41
37
34
32
29
27
56
49
42
37
33
29
26
23
21
19
17
56
47
39
34
29
25
22
19
17
15
13
70 1050 3050 3070 50 30
4' (121.92cm)
Module
8' (243.84cm)
Module
End Set Connector
4' (121.92cm) Run 11
8' (243.84cm) Run 11
12' (365.76cm) Run 111 1
16' (487.68cm) Run 21 1
20' (609.60cm) Run 121 2
24' (731.52cm) Run 31 2
  • Page 1 1
  • Page 2 2

Lightolier LP-23 User manual

Lightolier
Brand
Lightolier
Model
LP-23
Category
Work lights
Type
User manual

Lightolier LP-23 is a lighting system designated for indoor use, offering a wide range of options and features to meet various lighting needs. It consists of individual modules that can be combined to create continuous rows of lighting, as well as end sets to finish the run. LP-23 is equipped with a universal voltage ballast, allowing it to operate on a wide range of voltages, and features instant start capability for immediate illumination.

The system's versatility is further enhanced by a variety of options. Dual switching allows for separate row switching, while X4 modules can be used for the remainder of the run when dimming or switched emergency battery pack modules are employed. Emergency circuiting options are also available upon consultation with the factory.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents