Feiss VS44003-ORB Installation guide

Type
Installation guide

Feiss VS44003-ORB is a 3-light vanity strip light fixture designed for damp locations. It features a transitional style with an oil rubbed bronze finish and clear glass shades. The fixture is dimmable with a standard incandescent dimmer and requires three 60-watt maximum bulbs (not included). It is easy to install and comes with all necessary mounting hardware.

Feiss VS44003-ORB is a 3-light vanity strip light fixture designed for damp locations. It features a transitional style with an oil rubbed bronze finish and clear glass shades. The fixture is dimmable with a standard incandescent dimmer and requires three 60-watt maximum bulbs (not included). It is easy to install and comes with all necessary mounting hardware.

1
Installation Instructions for
Huntley 1, 2, 3, and 4 Light Vanity Strip
1.2
V 4400_S
V 44001, V 44002,SS
V 44003, V 44004SS
Secure the mounting plate to the electrical box with the two provided mounting plate screws (install anchors provided
with larger models for additional support).
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
Place the shade and spacer over the socket, then secure them in place by tightening the collar nut using the shade tool;
repeat for remaining sockets.
Screw the lamp(s) into the socket(s). Refer to the label on the lamp socket for Max Wattage information.
1
2
3
1A
LAMP
4
HOT WIRE
BLACK WIRE
ELECTRICAL BOX
MOUNTING
PLATE
NEUTRAL WIRE
WHITE WIRE
1
1
5
6
FIXTURE SCREW
5
Wall
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SOCKET
ALLEN WRENCH
MOUNTING
PLATE SCREW
SHADE
7
6
7
COLLAR NUT
SPACER
SHADE TOOL
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, IL 60077
800.969.3347
www.Feiss.com
© 2015 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss VS44003-ORB Installation guide

Type
Installation guide

Feiss VS44003-ORB is a 3-light vanity strip light fixture designed for damp locations. It features a transitional style with an oil rubbed bronze finish and clear glass shades. The fixture is dimmable with a standard incandescent dimmer and requires three 60-watt maximum bulbs (not included). It is easy to install and comes with all necessary mounting hardware.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI